McCormick Intl ZTX280

The McCormick Intl ZTX280 is a tractor produced by Mccormick Intl. It is equipped with a 506.47 ci 8.3 L engine. The listed engine power is Diesel (listed): 280 hp / 208.8 kW. Transmission: 36 forward and 16 reverse. Operating weight: 23152 lbs 10501 kg.

Engine Power

Diesel (listed): 280 hp / 208.8 kW

Fuel & Capacities

150.6 gal 570.0 L

Transmission

36 forward and 16 reverse

Operating Weight

23152 lbs 10501 kg

Overview

Production
Manufacturer	McCormick Intl

McCormick Intl ZTX280 Engine
Cummins 8.3L 6-cyl diesel
Fuel tank	150.6 gal 570.0 L
Engine details ...

McCormick Intl ZTX280 Power
Engine	280 hp 208.8 kW

Mechanical
Four-wheel drive

Hydraulics
Pump flow	29.1 gpm 110.1 lpm

Tractor hitch
Rear Type	III
Rear lift	24255 lbs 11002 kg

Power Take-off (PTO)
Rear PTO Type	540, 1000

Dimensions & Tires
Wheelbase	120.08 inches 305 cm
Weight	23152 lbs 10501 kg
Front tire	600/70R28
Rear tire	710/70R42
Full dimensions and tires ...

Electrical
Charging amps	150

Engine

Engine Detail — 506.47 ci / 8.3 L Diesel

Manufacturer	Cummins
Configuration	turbo diesel, 6-cylinder
Displacement	506.47 ci 8.3 L
Bore/Stroke	4.4882x5.31 inches 114 x 135 mm
Power	280 hp 208.8 kW
Rated RPM	2200
Torque	870.4 lb-ft 1180.3 Nm
Torque RPM	1200

Transmission

Transmission options
18-speed
36-speed

Transmission — 18 forward and 8 reverse

Gears

18 forward and 8 reverse

Transmission — 36 forward and 16 reverse

Gears

36 forward and 16 reverse

Dimensions

McCormick Intl ZTX280 Tires
Ag front	600/70R28
Ag rear	710/70R42

Dimensions
Wheelbase	120.08 inches 305 cm
Length	210.24 inches 534 cm
Height	122.05 inches 310 cm
Weight	23152 lbs 10501 kg

Photos

McCormick Intl ZTX280 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Mccormick Intl ZTX280 based on its 280 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	8+ Bottom On-Land Hitch8+ 铧重型机外牵引犁	Commercial / Field Scale	High horsepower articulated/4WD field plowing.
Rotary Cutter / MowerMowing & Clearing	15 to 20 ft Batwing4.6 - 6.1 m 宽幅折叠翼	Commercial / Field Scale	Large commercial field and roadside mowing operations.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	24 to 36 ft Heavy Duty Field Disc7.3 - 11.0 m 超宽重型整地耙	Commercial / Field Scale	Broad-acre grain tillage for high-drawbar tractors.
Hay BalerHay & Forage	Large Square Baler (3x4 or 4x4)大方捆商用打捆机 (1.2x1.2 m)	Commercial / Field Scale	High-capacity commercial forage harvesting (1000 RPM PTO).

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Mccormick Intl ZTX280.

Estimated Continuous Field Runtime: 10.3 hrs

Approximately 10.3 hours of continuous field operation at ~75% rated power on a full tank (150.6 gal / 570.1 L).

Estimated 75% Load Fuel Burn~14.6 gal/hr (55.1 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours