New Holland Boomer 25

The New Holland Boomer 25 is a tractor produced by New Holland. It is equipped with a 80.4 ci 1.3 L engine. The listed engine power is Diesel (gross): 27 hp / 20.1 kW. Transmission: infinite forward and reverse (2-range). Operating weight: 1,702 lbs 772 kg.

Engine Power

Diesel (gross): 27 hp / 20.1 kW

Fuel & Capacities

6.6 gal 25.0 L

Transmission

infinite forward and reverse (2-range)

Operating Weight

1,702 lbs 772 kg

Overview

	2012 - 2014 Boomer SeriesSub-Compact Utility tractor Boomer Series Sub-Compact Utility tractor

Production
Manufacturer	New Holland
Sub-Compact Utility tractor

New Holland Boomer 25 Engine
Mitsubishi 1.3L 3-cyl diesel
Fuel tank	6.6 gal 25.0 L
Engine details ...

New Holland Boomer 25 Transmission
hydrostatic
Transmission details ...

New Holland Boomer 25 Power
Engine (gross)	27 hp 20.1 kW
PTO (claimed)	19.9 hp 14.8 kW

Mechanical
Four-wheel drive
Differential lock	Mechanical rear lock engaged with foot pedal. Limited slip front differential.
Steering	hydrostatic power
Mechanical wet disc brakes
Two-post foldable ROPS.

Hydraulics
Type	Open center, fixed displacement gear pump
Rear valves	1 (optional)
Pump flow	6 gpm 22.7 lpm
Total flow	8.5 gpm 32.2 lpm
Steering flow	2.5 gpm 9.5 lpm

Tractor hitch
Rear Type	I
Control	mechanical position control
Rear lift (at ends)	1433 lbs 650 kg
Rear lift (at 24"/610mm)	1058 lbs 479 kg
Rear Arms	fixed link ends
Drawbar	1-position fixed

Power Take-off (PTO)
Rear PTO	independent
Clutch	electro-hydraulic
Rear PTO Type	540
Mid PTO	independent
Mid PTO Type	2000

Dimensions & Tires
Wheelbase	59 inches 149 cm
Weight	1,702 lbs 772 kg
Front tire	6-12
Rear tire	9.5-16
Full dimensions and tires ...

Electrical
Ground	negative
Charging system	alternator
Charging amps	50
Charging volts	12
Battery CCA	560
Battery volts	12
Battery AH	45

Engine

Engine Detail — 80.4 ci / 1.3 L Diesel

Manufacturer	Mitsubishi S3L2
Fuel Type	Diesel
Configuration	3-cylinder, liquid-cooled
Displacement	80.4 ci 1.3 L
Bore/Stroke	3.07x3.62 inches 78 x 92 mm
Emissions	Interim Tier 4
Power (gross)	27 hp 20.1 kW
Fuel system	mechanical indirect injection
Air cleaner	Single element, dry type
Pre-heating	glow plugs
Rated RPM	2700
Starter	electric
Starter volts	12

Transmission

Transmission — infinite forward and reverse (2-range) hydrostatic

Type	hydrostatic
Gears	infinite forward and reverse (2-range)
Two-range hydrostatic transmission with treddle foot pedal and cruise control.

Dimensions

New Holland Boomer 25 Tires
Standard tires (ag)	Front: 6-12. Rear: 9.5-16

Dimensions
Wheelbase	59 inches 149 cm
Length	103.6 inches 263 cm
Width	43.8 inches 111 cm
Height (ROPS)	85.5 inches 217 cm
Shipping weight	1,702 lbs 772 kg

Photos

New Holland Boomer 25 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for New Holland Boomer 25 based on its 27 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	1 to 2 Bottom (12")1 - 2 铧 (30 cm)	Light Duty	Ideal for garden plots and light sandy soil.
Rotary Cutter / MowerMowing & Clearing	5 ft (60 in)1.5 m	Medium Duty	Pasture maintenance and weeds up to 1.5" diameter.
Rotary TillerSeedbed Prep	54 to 60 in135 - 150 cm	Medium Duty	Thorough seedbed preparation in orchards and vegetable plots.
Disc HarrowSecondary Tillage	5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片)	Light Duty	Small acreage soil break-up and secondary aeration.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for New Holland Boomer 25.

Estimated Continuous Field Runtime: 4.7 hrs

Approximately 4.7 hours of continuous field operation at ~75% rated power on a full tank (6.6 gal / 25 L).

Estimated 75% Load Fuel Burn~1.4 gal/hr (5.3 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours