New Holland TK4030

The New Holland TK4030 is a tractor produced by New Holland. It is equipped with a 195 ci 3.2 L engine. The listed engine power is Diesel (gross): 76.4 hp / 57.0 kW. Transmission: 16 forward and 8 reverse. Drive type: crawler. Operating weight: 7231 to 8047 pounds.

Engine Power

Diesel (gross): 76.4 hp / 57.0 kW

Drive & Traction

crawler

Fuel & Capacities

21.9 gal 82.9 L

Transmission

16 forward and 8 reverse

Operating Weight

7231 to 8047 pounds

Overview

	2009 - 2017 TK4000 SeriesAgricultural Crawler tractor TK4000 Series Agricultural Crawler tractor

Production
Manufacturer	New Holland
Agricultural Crawler tractor
Built in Jesi, Italy

Variants
T4030	wheeled tractor
TK4030	crawler
TK4030F	narrow crawler
TK4030V	ultra-narrow crawler

New Holland TK4030 Engine
FPT 3.2L 4-cyl diesel
Fuel tank	21.9 gal 82.9 L
Engine details ...

New Holland TK4030 Power
Engine (gross)	76.4 hp 57.0 kW
PTO (claimed)	64 hp 47.7 kW

Mechanical
Drive	crawler
Two-post mid-mount folding ROPS.

Hydraulics
Type	open center
Pressure	2755 psi 190.0 bar
Valves	3
Pump flow	9.4 gpm 35.6 lpm
Total flow	14.8 gpm 56.0 lpm
Steering flow	5.4 gpm 20.4 lpm

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540/540E

Dimensions & Tracks
Weight	7231 to 8047 pounds
13.8-inch tracks
Full dimensions and tracks ...

Electrical
Charging system	alternator
Charging amps	120
Battery CCA	800
Battery volts	12

References

New Holland TK4000 published in 2008
New Holland TK4000 published in 2010
New Holland TK4000 published in 2011

Engine

Engine Detail — 195 ci / 3.2 L Diesel

Manufacturer	FPT F5C
Configuration	turbocharged intercooled diesel, 4-cylinder, liquid-cooled
Displacement	195 ci 3.2 L
Bore/Stroke	3.898x4.094 inches 99 x 104 mm
Emissions	Tier III
Rated Power (gross)	76.4 hp 57.0 kW
Rated RPM	2300
Torque	243.4 lb-ft 330.1 Nm
Torque RPM	1300
Starter	electric
Starter volts	12

Transmission

Transmission options
8-speed unsynchronized
16-speed creeper

Transmission — 8 forward and reverse unsynchronized

Type	unsynchronized
Gears	8 forward and reverse
Transmission
Type	creeper
Gears	16 forward and 8 reverse

Dimensions

New Holland TK4030 Tracks
Width	13.8 inches 35 cm
TK4030V width	10.6 inches 26 cm
TK4030F width	12.2 inches 30 cm

Dimensions
Length	124.9 inches 317 cm
Width	57.1 inches 145 cm
TK4030V Width	46.1 inches 117 cm
TK4030F Width	51.6 inches 131 cm
Gauge	43.3 inches 109 cm
TK4030V Gauge	35.4 inches 89 cm
TK4030F Gauge	39.4 inches 100 cm

New Holland TK4030 Weight
	8047 lbs 3650 kg
TK4030V	7231 lbs 3279 kg
TK4030F	7408 lbs 3360 kg

New Holland TK4030 Height
Steering wheel	39.4 inches 100 cm
TK4030V Steering wheel	38.6 inches 98 cm
TK4030F Steering wheel	39.4 inches 100 cm
ROPS	83.3 inches 211 cm
TK4030V ROPS	81.9 inches 208 cm
TK4030F ROPS	82.5 inches 209 cm

Photos

New Holland TK4030 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for New Holland TK4030 based on its 76.4 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	3 to 4 Bottom (16")3 - 4 铧 (40 cm)	Heavy Duty	Suitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing	7 to 8 ft (84-96 in)2.1 - 2.4 m	Heavy Duty	Heavy-duty twin spindle cutter for overgrown acreage.
Rotary TillerSeedbed Prep	78 to 84 in200 - 215 cm	Heavy Duty	Heavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机	Heavy Duty	Silage and dry hay; 540 RPM PTO with slip-clutch.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for New Holland TK4030.

Estimated Continuous Field Runtime: 5.5 hrs

Approximately 5.5 hours of continuous field operation at ~75% rated power on a full tank (21.9 gal / 82.9 L).

Estimated 75% Load Fuel Burn~4 gal/hr (15 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours