Renault Temis 550

The Renault Temis 550 is a tractor produced by Renault. It is equipped with a 276.4 ci 4.5 L engine. The listed engine power is Diesel (listed): 102 hp / 76.1 kW. Transmission: 24 forward and 8 reverse. Operating weight: 11,774 lbs 5340 kg.

Engine Power

Diesel (listed): 102 hp / 76.1 kW

Fuel & Capacities

42.3 gal 160.1 L

Transmission

24 forward and 8 reverse

Operating Weight

11,774 lbs 5340 kg

Overview

	2000 - 2002 Temis Series

Production
Manufacturer	Renault

Renault Temis 550 Engine
John Deere 4.5L 4-cyl diesel
Fuel tank	42.3 gal 160.1 L
Engine details ...

Renault Temis 550 Power
Engine	102 hp 76.1 kW

Mechanical
Four-wheel drive
Steering	hydrostatic power
Wet disc brakes
cab standard

Hydraulics
Total flow	20.1 gpm 76.1 lpm
	27 gpm 102.2 lpm

Tractor hitch
Rear lift	16,004 lbs 7259 kg

Power Take-off (PTO)
Rear PTO Type	540/1000

Dimensions & Tires
Wheelbase	97.6 inches 247 cm
Weight	11,774 lbs 5340 kg
Front tire	13.6R28
Rear tire	16.9R38
Full dimensions and tires ...

Engine

Engine Detail — 276.4 ci / 4.5 L Diesel

Manufacturer	John Deere 4045 TRT
Configuration	turbocharged diesel, 4-cylinder, liquid-cooled
Displacement	276.4 ci 4.5 L
Bore/Stroke	4.193x5.00 inches 107 x 127 mm
Power	102 hp 76.1 kW
Rated RPM	2350
Torque	298.7 lb-ft 405.0 Nm
Torque RPM	1500

Transmission

Transmission options
16-speed
24-speed

Transmission — 16 forward and reverse

Gears

16 forward and reverse

Transmission — 24 forward and 8 reverse

Gears

24 forward and 8 reverse

Dimensions

Renault Temis 550 Tires
Ag front	13.6R28
Ag rear	16.9R38

Dimensions
Wheelbase	97.6 inches 247 cm
Length	183.1 inches 465 cm
Height	113.0 inches 287 cm
Weight	11,774 lbs 5340 kg

Photos

Renault Temis 550 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Renault Temis 550 based on its 102 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Renault Temis 550.

Estimated Continuous Field Runtime: 8 hrs

Approximately 8 hours of continuous field operation at ~75% rated power on a full tank (42.3 gal / 160.1 L).

Estimated 75% Load Fuel Burn~5.3 gal/hr (20.1 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours