Renault Temis 630

The Renault Temis 630 is a tractor produced by Renault. It is equipped with a 357.6 ci 5.9 L engine. The listed engine power is Diesel (listed): 129 hp / 96.2 kW. Transmission: 24 forward and 8 reverse. Operating weight: 13,582 lbs 6160 kg.

Engine Power

Diesel (listed): 129 hp / 96.2 kW

Fuel & Capacities

56.8 gal 215.0 L

Transmission

24 forward and 8 reverse

Operating Weight

13,582 lbs 6160 kg

Overview

	2000 - 2002 Temis Series

Production
Manufacturer	Renault

Renault Temis 630 Engine
Iveco 5.9L 6-cyl diesel
Fuel tank	56.8 gal 215.0 L
Engine details ...

Renault Temis 630 Power
Engine	129 hp 96.2 kW

Mechanical
Four-wheel drive
Steering	hydrostatic power
Wet disc brakes
cab standard

Hydraulics
Total flow	22.5 gpm 85.2 lpm
	29.1 gpm 110.1 lpm

Tractor hitch
Rear lift	19,510 lbs 8849 kg

Power Take-off (PTO)
Rear PTO Type	540/1000

Dimensions & Tires
Wheelbase	107.1 inches 272 cm
Weight	13,582 lbs 6160 kg
Front tire	14.9R28
Rear tire	18.4R38
Full dimensions and tires ...

Engine

Engine Detail — 357.6 ci / 5.9 L Diesel

Manufacturer	Iveco 8065.25LTC
Configuration	turbocharged diesel, 6-cylinder, liquid-cooled
Displacement	357.6 ci 5.9 L
Bore/Stroke	4.094x4.528 inches 104 x 115 mm
Power	129 hp 96.2 kW
Rated RPM	2250
Torque	361.4 lb-ft 490.1 Nm
Torque RPM	1400

Transmission

Transmission options
16-speed
24-speed

Transmission — 16 forward and reverse

Gears

16 forward and reverse

Transmission — 24 forward and 8 reverse

Gears

24 forward and 8 reverse

Dimensions

Renault Temis 630 Tires
Ag front	14.9R28
Ag rear	18.4R38

Dimensions
Wheelbase	107.1 inches 272 cm
Length	200.0 inches 508 cm
Height	118.5 inches 300 cm
Weight	13,582 lbs 6160 kg

Photos

Renault Temis 630 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Renault Temis 630 based on its 129 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙	Commercial / Field Scale	Wide commercial field leveling; requires hydraulic remotes.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Renault Temis 630.

Estimated Continuous Field Runtime: 8.5 hrs

Approximately 8.5 hours of continuous field operation at ~75% rated power on a full tank (56.8 gal / 215 L).

Estimated 75% Load Fuel Burn~6.7 gal/hr (25.4 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours