Rhino 3324 Classic

The Rhino 3324 Classic is a tractor produced by Rhino. It is equipped with a 105.43 ci 1.7 L engine. The listed engine power is Diesel (listed): 32 hp / 23.9 kW. Transmission: 8 forward and 2 reverse. Drive type: 4x2 MFWD 4WD. Operating weight: 3500 lbs 1587 kg.

Engine Power

Diesel (listed): 32 hp / 23.9 kW

Drive & Traction

4x2 MFWD 4WD

Fuel & Capacities

7 gal 26.5 L

Transmission

8 forward and 2 reverse

Operating Weight

3500 lbs 1587 kg

Overview

	1995 - 1999 Compact Utility tractor

Production
Manufacturer	Rhino
Compact Utility tractor
Built in China

Variants
3320	2WD
3324	4WD

Rhino 3324 Engine
1.7L 2-cyl diesel
Fuel tank	7 gal 26.5 L
Engine details ...

Rhino 3324 Transmission
8-speed gear
Transmission details ...

Rhino 3324 Power
Engine	32 hp 23.9 kW

Mechanical
Drive	4x2 MFWD 4WD
Power steering
Two-post folding ROPS.

Hydraulics
Type	open center
Valves	2 OptOptional
Pump flow	5.25 gpm 19.9 lpm
Steering flow	3.4 gpm 12.9 lpm

Tractor hitch
Rear Type	I
Rear lift (at 24"/610mm)	1800 lbs 816 kg

Power Take-off (PTO)
Rear PTO	live
Rear PTO Type	540 (1.375)

Dimensions & Tires
Wheelbase	61.8 inches 156 cm
Weight	3500 lbs 1587 kg
Front tire	7.5x16
Rear tire	11.2x24
Full dimensions and tires ...

References

3320 - 3324 published in 1995, by Rhino

Engine

Engine Detail — 105.43 ci / 1.7 L Diesel

Fuel Type	Diesel
Configuration	2-cylinder, liquid-cooled
Displacement	105.43 ci 1.7 L
Power	32 hp 23.9 kW
Rated RPM	2200
Starter volts	12

Transmission

Transmission — 8 forward and 2 reverse gear

Type	gear
Gears	8 forward and 2 reverse
Clutch	dry disc
Four gears, plus reverse, in two ranges.

Dimensions

Rhino 3324 Tires
Standard tires (ag)	Front: 7.5x16. Rear: 11.2x24

Dimensions
Wheelbase	61.8 inches 156 cm
Length	109 inches 276 cm
Width	67 inches 170 cm
Height (steering wheel)	54 inches 137 cm
Height (ROPS)	89 inches 226 cm
Weight	3500 lbs 1587 kg

Photos

Rhino 3324 Classic tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Rhino 3324 Classic based on its 32 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	2 to 3 Bottom (14-16")2 - 3 铧 (35-40 cm)	Medium Duty	Standard utility farm tillage.
Rotary Cutter / MowerMowing & Clearing	5 ft (60 in)1.5 m	Medium Duty	Pasture maintenance and weeds up to 1.5" diameter.
Rotary TillerSeedbed Prep	54 to 60 in135 - 150 cm	Medium Duty	Thorough seedbed preparation in orchards and vegetable plots.
Disc HarrowSecondary Tillage	5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片)	Light Duty	Small acreage soil break-up and secondary aeration.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Rhino 3324 Classic.

Estimated Continuous Field Runtime: 4.2 hrs

Approximately 4.2 hours of continuous field operation at ~75% rated power on a full tank (7 gal / 26.5 L).

Estimated 75% Load Fuel Burn~1.7 gal/hr (6.3 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours