Snapper 281123BVE
The Snapper 281123BVE is a tractor produced by Snapper Lawn Tractors. The listed engine power is Gasoline (gross): 11 hp / 8.2 kW. Transmission: 5 forward and 1 reverse. Operating weight: 314 lbs 142 kg.
Engine Power
Gasoline (gross): 11 hp / 8.2 kW
Fuel & Capacities
1.75 gal
6.6 L
Transmission
5 forward and 1 reverse
Operating Weight
314 lbs
142 kg
Overview
 | 2003
23 SeriesRiding lawn mower
23 Series
Riding lawn mower |
|---|
Production | |
|---|---|
Manufacturer | Snapper |
Riding lawn mower | |
Snapper 281123BVE Engine | |
|---|---|
11HP Briggs & Stratton 1-cyl gasoline | |
Fuel tank | 1.75 gal
6.6 L |
Engine details ...  | |
Snapper 281123BVE Transmission | |
|---|---|
5-speed friction disc | |
Transmission details ...  |
Mechanical | |
|---|---|
Two-wheel drive | |
Manual steering | |
Open operator station. |
Power Take-off (PTO) | |
|---|---|
Mid PTO | independent |
Dimensions & Tires | |
|---|---|
Wheelbase | 46 inches
116 cm |
Weight | 314 lbs
142 kg |
Front tire | 11x4.00-4 |
Rear tire | 16x6.50-8 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Battery volts | 12 |
References | |
|---|---|
 | |
Legendary Quality published in 2003, by Snapper |
Engine
Engine Detail — Gasoline
Manufacturer | Briggs & Stratton |
Fuel Type | Gasoline |
Configuration | 1-cylinder, air-cooled vertical-shaft |
Power (gross) | 11 hp
8.2 kW |
Starter | electric |
Starter volts | 12 |
Transmission
Transmission — 5 forward and 1 reverse friction disc
Type | friction disc |
Gears | 5 forward and 1 reverse |
 | |
Dimensions
Snapper 281123BVE Tires | |
|---|---|
Lawn/turf front | 11x4.00-4 |
Lawn/turf rear | 16x6.50-8 |
Dimensions | |
|---|---|
Wheelbase | 46 inches
116 cm |
Length | 64 inches
162 cm |
Height | 39 inches
99 cm |
Weight | 314 lbs
142 kg |
Attachments
Attachment overview | |
|---|---|
28" mid-mount mower deck | |
Blade |
28" Mower deck | |
|---|---|
Type | mid-mount Snapper |
1-blade with manual lift | |
Cutting width | 28 inches
71 cm |
Overall width | 32 inches
81 cm |
Cut height | 1.5 to 4.0 inch
3 to 10 cm |
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Snapper Lawn Tractors Snapper 281123BVE.
Estimated Continuous Field Runtime: 3.1 hrs
Approximately 3.1 hours of continuous field operation at ~75% rated power on a full tank (1.8 gal / 6.6 L).
Estimated 75% Load Fuel Burn~0.6 gal/hr (2.2 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Snapper Lawn Tractors Snapper 281123BVE Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Snapper Lawn Tractors Snapper 281123BVE.
Converted Equivalents:
Horsepower (HP)11 hp
Kilowatts (kW)8.2 kW
Metric Horsepower (PS / CV)11.2 PS
Related models
Snapper lawn tractors 250914
- Power:
- 9
- Production years:
- 1995 - 1995
Snapper lawn tractors 280922B
- Power:
- 9
- Production years:
- 2003 - 2003
Snapper lawn tractors 300914
- Power:
- 9
- Production years:
- 1995 - 1995
Snapper lawn tractors 300922B
- Power:
- 9
- Production years:
- 2003 - 2003
Snapper lawn tractors 251014
- Power:
- 10
- Production years:
- 1995 - 1995