snapper lawn tractors lt2042
 | 2006 - 2010
LT200 SeriesLawn tractor | 2006 - 2010 | LT200 Series | Lawn tractor |
|---|---|---|---|---|
2006 - 2010 | ||||
LT200 Series | ||||
Lawn tractor | ||||
2006 - 2010 | |
|---|---|
LT200 Series | |
Lawn tractor |
Production | |
|---|---|
Manufacturer | Snapper (a part of Briggs & Stratton) |
Lawn tractor | |
Original price was $2,350 in 2007 | |
Snapper LT2042 Engine | |
|---|---|
20HP Briggs & Stratton 2-cyl gasoline | |
Fuel tank | 3.5 gal
13.2 L |
Engine details ...  | |
Snapper LT2042 Transmission | |
|---|---|
hydrostatic | |
Transmission details ...  |
Mechanical | |
|---|---|
Two-wheel drive | |
Open operator station. |
Power Take-off (PTO) | |
|---|---|
Mid PTO | independent |
Clutch | electric |
Dimensions & Tires | |
|---|---|
Wheelbase | 50 inches
127 cm |
Weight | 494 lbs
224 kg |
Front tire | 15x6.00-6 |
Rear tire | 20x8.00-8 |
Full dimensions and tires ...  | |
Snapper LT2042 attachments | |
|---|---|
42" mid-mount mower deck | |
Attachment details ...  |
LT2042 Serial Number Location | |
|---|---|
 | |
Serial number decal on the left side of the tractor frame, just ahead of the footrest. |
Electrical | |
|---|---|
Ground | negative |
Battery CCA | 230 |
Battery volts | 12 |
Recommended Products
Advertisement · Featured Tractor-Related Products
Tractor Backhoe Attachment with Mechanical Thumb
The MechMaxx BH660 backhoe is a reliable solution for a wide range of digging and excavation tasks. Designed to fit CAT I 3-point hitch tractors, it requires a minimum of 15 PTO horsepower and a tractor weight of at least 1,500 lbs. This backhoe is ideal for ditching on farms and grazing lands, digging pools, cleaning waterways, as well as assistant excavating work in construction and building roads.
M805853: Spark Plug
Trivalent metal plating provides superior anti-corrosion and anti-seizing properties Corrugated ribs prevent flashover Pure alumina silicate ceramic insulator, provides superior strength and better heat transfer Copper core aids in heat removal
John Deere Original Equipment Cool-Gard II PRE-Mix
COOL-GARD II PRE-MIX, 1 GAL;3.78L. DO NOT ADD WATER. Prediluted Engine Coolant. Heavy-duty, low-silicate, high performance antifreeze/coolant. This is a OEM John Deere Part.
AM116304: Inline Fuel Filter
for Kohler 25 050 22-S, 25 050 03-S ,25 050 08-S Fits 1/4-inch and 5/16-inch ID Fuel Line. for John Deere AM116304 AM1163041 GY20709 for Small Engine GKI VW312 6mm-8mm 1/4 Plastic Inline Gas/Fuel Filter G1000 G4164
* This page contains affiliate links, purchases may generate revenue for this site