Snapper RE110
The Snapper RE110 is a tractor produced by Snapper Lawn Tractors. It is equipped with a 344 cc 21 ci engine. The listed engine power is Gasoline (gross): 11.5 hp / 8.6 kW. Transmission: 6 forward and 1 reverse.
Engine Power
Gasoline (gross): 11.5 hp / 8.6 kW
Fuel & Capacities
2 gal
7.6 L
Transmission
6 forward and 1 reverse
Overview
 | 2013 - 2018
Riding lawn mower |
|---|
Production | |
|---|---|
Manufacturer | Snapper (a part of Briggs & Stratton) |
Riding lawn mower | |
Original price was $1,649 in 2014 | |
Snapper RE110 Engine | |
|---|---|
11.5HP Briggs & Stratton 344cc 1-cyl gasoline | |
Fuel tank | 2 gal
7.6 L |
Engine details ...  | |
Snapper RE110 Transmission | |
|---|---|
6-speed friction disc | |
Transmission details ...  |
Mechanical | |
|---|---|
Two-wheel drive | |
Steering | manual |
Open operator station. | |
Power Take-off (PTO) | |
|---|---|
Mid PTO | independent |
Clutch | mechanical |
Dimensions & Tires | |
|---|---|
Front tire | 11x4.00-4 |
Rear tire | 16x6.5-8 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Battery CCA | 190 |
Battery volts | 12 |
References | |
|---|---|
 | |
Product Catalog published in 2013, by Snapper |
Engine
Engine Detail — 344 cc / 21 ci Gasoline
Manufacturer | Briggs & Stratton PowerBuilt |
Fuel Type | Gasoline |
Configuration | 1-cylinder, air-cooled vertical-shaft |
Displacement | 344 cc
21 ci |
Bore/Stroke | 3.44x2.26 inches
87 x 57 mm |
Power (gross) | 11.5 hp
8.6 kW |
Starter | electric |
Starter volts | 12 |
Transmission
Transmission — 6 forward and 1 reverse friction disc
Type | friction disc |
Gears | 6 forward and 1 reverse |
 | |
Dimensions
Snapper RE110 Tires | |
|---|---|
Lawn/turf front | 11x4.00-4 |
Lawn/turf rear | 16x6.5-8 |
Dimensions | |
|---|---|
Length | 66 inches
167 cm |
Width | 32 inches
81 cm |
Height | 43 inches
109 cm |
Front axle | Steel |
Attachments
28" Mower deck | |
|---|---|
Type | mid-mount Snapper |
1-blade with manual lift | |
Cutting width | 28 inches
71 cm |
Cut height | 1.5 to 4 inch
3 to 10 cm |
Cut positions | 6 |
Photos
Snapper RE110
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Snapper Lawn Tractors Snapper RE110.
Estimated Continuous Field Runtime: 3.3 hrs
Approximately 3.3 hours of continuous field operation at ~75% rated power on a full tank (2 gal / 7.6 L).
Estimated 75% Load Fuel Burn~0.6 gal/hr (2.3 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Snapper Lawn Tractors Snapper RE110 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Snapper Lawn Tractors Snapper RE110.
Converted Equivalents:
Horsepower (HP)11.5 hp
Kilowatts (kW)8.6 kW
Metric Horsepower (PS / CV)11.7 PS
Related models
Snapper lawn tractors 251014
- Power:
- 10
- Production years:
- 1995 - 1995
Snapper lawn tractors 281016BE
- Power:
- 10
- Production years:
- 1997 - 1998
Snapper lawn tractors 281022BE
- Power:
- 10
- Production years:
- 2003 - 2003
Snapper lawn tractors 281023BVE
- Power:
- 10
- Production years:
- 2003 - 2003
Snapper lawn tractors 28106
- Power:
- 10
- Production years:
- 1987 - 1989