Steyr 9090M
The Steyr 9090M is a tractor produced by Steyr. It is equipped with a 268.3 ci 4.4 L engine. The listed engine power is Diesel (listed): 89 hp / 66.4 kW. Transmission: STEYR Synchro Shift/creeper. Operating weight: 8,708 lbs 3949 kg.
Engine Power
Diesel (listed): 89 hp / 66.4 kW
Fuel & Capacities
26.4 gal
99.9 L
Transmission
STEYR Synchro Shift/creeper
Operating Weight
8,708 lbs
3949 kg
Overview
 | 2003 - 2007
Utility tractor |
|---|
Production | |
|---|---|
Manufacturer | Steyr |
Utility tractor | |
Steyr 9090M Engine | |
|---|---|
Sisu 4.4L 4-cyl diesel | |
Fuel tank | 26.4 gal
99.9 L |
39.6 galOptOptional
149.9 L | |
Engine details ...  | |
Steyr 9090M Power | |
|---|---|
Engine | 89 hp
66.4 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Power steering | |
Wet disc brakes | |
Supercomfort cab |
Hydraulics | |
|---|---|
Pressure | 2538 psi
175.0 bar |
Valves | 4 |
Total flow | 13.2 gpm
50.0 lpm |
22.7 gpmOptOptional
85.9 lpm | |
Tractor hitch | |
|---|---|
Rear lift | 10,800 lbs
4898 kg |
Front lift | 6,698 lbs
3038 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO Type | 430/540/540E/1000 |
Front PTO Type | 1000 |
Dimensions & Tires | |
|---|---|
Wheelbase | 97.7 inches
248 cm |
Weight | 8,708 lbs
3949 kg |
Front tire | 14.9R24 |
Rear tire | 18.4R34 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
Battery volts | 12 |
Engine
Engine Detail — 268.3 ci / 4.4 L Diesel
Manufacturer | Sisu 44DT |
Configuration | turbocharged diesel, 4-cylinder, liquid-cooled |
Displacement | 268.3 ci
4.4 L |
Bore/Stroke | 4.25x4.72 inches
108 x 120 mm |
Power | 89 hp
66.4 kW |
Rated RPM | 2300 |
Torque | 247.1 lb-ft
335.1 Nm |
Torque RPM | 1400 |
Starter | electric |
Starter volts | 12 |
Transmission
Transmission options | |
|---|---|
16-speed | |
32-speed |
Transmission — STEYR Power-2
Transmission | STEYR Power-2 |
Gears | 16 forward and reverse |
Transmission — STEYR Synchro Shift
Transmission | STEYR Synchro Shift |
Gears | 16 forward and 8 reverse |
Transmission | STEYR Synchro Shift/creeper |
Gears | 32 forward and 16 reverse |
Dimensions
Steyr 9090M Tires | |
|---|---|
Ag front | 14.9R24 |
Ag rear | 18.4R34 |
Dimensions | |
|---|---|
Wheelbase | 97.7 inches
248 cm |
Length | 165.9 inches
421 cm |
Width | 85.4 inches
216 cm |
Height | 106 inches
269 cm |
Weight | 8,708 lbs
3949 kg |
Photos
Steyr 9090M tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for Steyr 9090M based on its 89 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 3 to 4 Bottom (16")3 - 4 铧 (40 cm) | Heavy Duty | Suitable for medium loam and stubble turnover. |
Rotary Cutter / MowerMowing & Clearing | 7 to 8 ft (84-96 in)2.1 - 2.4 m | Heavy Duty | Heavy-duty twin spindle cutter for overgrown acreage. |
Rotary TillerSeedbed Prep | 78 to 84 in200 - 215 cm | Heavy Duty | Heavy commercial tiller with multi-speed gearbox. |
Disc HarrowSecondary Tillage | 10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙 | Heavy Duty | Aggressive residue cutting in corn/cotton stubble. |
Hay BalerHay & Forage | 4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机 | Heavy Duty | Silage and dry hay; 540 RPM PTO with slip-clutch. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Steyr 9090M.
Estimated Continuous Field Runtime: 5.7 hrs
Approximately 5.7 hours of continuous field operation at ~75% rated power on a full tank (26.4 gal / 99.9 L).
Estimated 75% Load Fuel Burn~4.6 gal/hr (17.5 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Steyr 9090M Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Steyr 9090M.
Converted Equivalents:
Horsepower (HP)89 hp
Kilowatts (kW)66.4 kW
Metric Horsepower (PS / CV)90.2 PS
Direct Competitor Comparison
Compare Steyr 9090M against same-era industry alternatives in the same horsepower class.
Current Model
Steyr
Steyr 9090M
Engine Power:Diesel (listed): 89 hp / 66.4 kW
★ Baseline Reference
International HarvesterMarket Competitor
International Harvester 706
Engine Power:80.5
Production Years:1963 - 1967
Related models
Steyr 370
- Power:
- 72
- Production years:
- 2003 - 2008
Steyr 8085
- Power:
- 72
- Production years:
- 1988 - 1993
Steyr M 975
- Power:
- 75
- Production years:
- 1994 - 2004
Steyr 375
- Power:
- 76
- Production years:
- 2003 - 2008
Steyr 9078
- Power:
- 78
- Production years:
- 1993 - 1995