Steyr 9105MT
The Steyr 9105MT is a tractor produced by Steyr. It is equipped with a 268.3 ci 4.4 L engine. The listed engine power is Diesel (gross): 101 hp / 75.3 kW. Transmission: Power-2. Operating weight: 9215 lbs 4179 kg.
Engine Power
Diesel (gross): 101 hp / 75.3 kW
Fuel & Capacities
26.4 gal
99.9 L
Transmission
Power-2
Operating Weight
9215 lbs
4179 kg
Overview
 | 2008 - 2011
9000MT SeriesUtility tractor
9000MT Series
Utility tractor |
|---|
Production | |
|---|---|
Manufacturer | Steyr |
Utility tractor | |
Steyr 9105MT Engine | |
|---|---|
Sisu 4.4L 4-cyl diesel | |
Fuel tank | 26.4 gal
99.9 L |
Engine details ...  | |
Steyr 9105MT Transmission | |
|---|---|
16-speed | |
Transmission details ...  |
Steyr 9105MT Power | |
|---|---|
Engine (gross) | 101 hp
75.3 kW |
Engine (max) | 102 hp
76.1 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Power steering | |
Hydraulic wet disc brakes | |
Trailer brakes | pneumatic OptOptional |
hydraulic OptOptional | |
Cab standard with heater. Available air-conditioning. | |
Hydraulics | |
|---|---|
Pressure | 2538 psi
175.0 bar |
Valves | 2 or 3 |
Pump flow | 13.2 gpm
50.0 lpm |
22.7 gpm*With optional triple pump.
85.9 lpm | |
Steering flow | 9 gpm
34.1 lpm |
Tractor hitch | |
|---|---|
Rear lift | 10803 lbs
4900 kg |
Front lift | 5511 lbs
2499 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 430/540/540E/1000 |
Engine RPM | 430@2130 |
540@2045 | |
540E@1506 | |
1000@2130 | |
Front PTO | independent OptOptional |
Front PTO Type | 1000 |
Dimensions & Tires | |
|---|---|
Wheelbase | 97.7 inches
248 cm |
Weight | 9215 lbs
4179 kg |
Front tire | 14.9R24 |
Rear tire | 18.4R34 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
Battery volts | 12 |
Engine
Engine Detail — 268.3 ci / 4.4 L Diesel
Manufacturer | Sisu |
Configuration | turbocharged intercooled diesel, 4-cylinder, liquid-cooled |
Displacement | 268.3 ci
4.4 L |
Bore/Stroke | 4.25x4.72 inches
108 x 120 mm |
Emissions | Tier III |
Rated Power (gross) | 101 hp
75.3 kW |
Maximum Power (gross) | 102 hp
76.1 kW |
Rated RPM | 2300 |
Torque | 292.8 lb-ft
397.0 Nm |
Torque RPM | 1400 |
Starter | electric |
Starter volts | 12 |
Transmission
Transmission — Power-2
Transmission | Power-2 |
Gears | 16 forward and 8 reverse |
Dimensions
Steyr 9105MT Tires | |
|---|---|
Standard tires (ag) | Front: 14.9R24. Rear: 18.4R34 |
Dimensions | |
|---|---|
Wheelbase | 97.7 inches
248 cm |
Length | 166 inches
421 cm |
Width | 85.4 inches
216 cm |
Height (cab) | 107.5 inches
273 cm |
Shipping weight | 9215 lbs
4179 kg |
Max weight | 15873 lbs
7199 kg |
Front tread | 66.7 inches
169 cm |
Rear tread | 66.9 inches
169 cm |
Recommended Implements & Sizing Guide
Engineering recommendations for Steyr 9105MT based on its 101 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm) | Heavy Duty | Heavy primary tillage; semi-mounted hitch recommended. |
Rotary Cutter / MowerMowing & Clearing | 10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼 | Heavy Duty | Wide swath pasture and crop residue shredding. |
Rotary TillerSeedbed Prep | 90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机 | Commercial / Field Scale | Deep intensive seedbed preparation for commercial row crops. |
Disc HarrowSecondary Tillage | 10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙 | Heavy Duty | Aggressive residue cutting in corn/cotton stubble. |
Hay BalerHay & Forage | 5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机 | Heavy Duty | High density baling; requires minimum 85 PTO HP. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Steyr 9105MT.
Estimated Continuous Field Runtime: 5 hrs
Approximately 5 hours of continuous field operation at ~75% rated power on a full tank (26.4 gal / 99.9 L).
Estimated 75% Load Fuel Burn~5.3 gal/hr (19.9 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Steyr 9105MT Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Steyr 9105MT.
Converted Equivalents:
Horsepower (HP)101 hp
Kilowatts (kW)75.3 kW
Metric Horsepower (PS / CV)102.4 PS
Direct Competitor Comparison
Compare Steyr 9105MT against same-era industry alternatives in the same horsepower class.
Current Model
Steyr
Steyr 9105MT
Engine Power:Diesel (gross): 101 hp / 75.3 kW
★ Baseline Reference
International HarvesterMarket Competitor
International Harvester 966
Engine Power:91
Production Years:1971 - 1976
Related models
Steyr 485
- Power:
- 82
- Production years:
- 2005 - 2008
Steyr 9080M
- Power:
- 82
- Production years:
- 2003 - 2007
Steyr M 9083
- Power:
- 83
- Production years:
- 1994 - 1995
Steyr 8100
- Power:
- 85
- Production years:
- 1978 - 1984
Steyr 988
- Power:
- 85
- Production years:
- 1977 - 1979