Ursus 1654
The Ursus 1654 is a tractor produced by Ursus. It is equipped with a 445.4 ci 7.3 L engine. The listed engine power is Diesel (listed): 158.2 hp / 118.0 kW. Transmission: 16 forward and 8 reverse. Operating weight: 13051 lbs 5919 kg.
Engine Power
Diesel (listed): 158.2 hp / 118.0 kW
Fuel & Capacities
direct injection
Transmission
16 forward and 8 reverse
Operating Weight
13051 lbs
5919 kg
Overview
 | 2006 - 2009
30 Series |
|---|
Production | |
|---|---|
Manufacturer | Ursus |
Built in Warsaw, Poland | |
Ursus 1654 Engine | |
|---|---|
Zetor 7.3L 6-cyl diesel | |
Engine details ...  |
Ursus 1654 Transmission | |
|---|---|
16-speed two-speed power shift | |
Transmission details ...  |
Ursus 1654 Power | |
|---|---|
Engine | 158.2 hp
118.0 kW |
PTO (claimed) | 139.5 hp
104.0 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Power steering | |
Dry disc brakes | |
Cab standard with heat. |
Hydraulics | |
|---|---|
Pump flow | 14.5 gpm
54.9 lpm |
Tractor hitch | |
|---|---|
Rear Type | II |
III OptOptional | |
Rear lift | 14771 lbs
6700 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Clutch | hydraulic |
Dimensions & Tires | |
|---|---|
Wheelbase | 106.5 inches
270 cm |
Weight | 13051 lbs
5919 kg |
Front tire | 14.9R28 |
Rear tire | 20.8R38 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Charging system | alternator |
Engine
Engine Detail — 445.4 ci / 7.3 L Diesel
Manufacturer | Zetor Z 8604.035 |
Configuration | turbocharged diesel, 6-cylinder, liquid-cooled |
Displacement | 445.4 ci
7.3 L |
Bore/Stroke | 4.33x5.04 inches
110 x 128 mm |
Power | 158.2 hp
118.0 kW |
Fuel system | direct injection |
Rated RPM | 2200 |
Torque | 492 lb-ft
667.2 Nm |
Starter type | electric |
Transmission
Transmission — 16 forward and 8 reverse two-speed power shift
Type | two-speed power shift |
Gears | 16 forward and 8 reverse |
Four gears (1-4) in two ranges (I/II) plus reverse range (R) with two-speed power shift. | |
Dimensions
Ursus 1654 Tires | |
|---|---|
Standard tires (ag) | Front: 14.9R28. Rear: 20.8R38 |
Dimensions | |
|---|---|
Wheelbase | 106.5 inches
270 cm |
Length | 177 inches
449 cm |
Weight | 13051 lbs
5919 kg |
Ballasted weight | 15675 lbs
7110 kg |
Ground clearance | 19.1 inches
48 cm |
Photos
Ursus 1654 tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for Ursus 1654 based on its 158.2 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 5 to 7 Bottom (18")5 - 7 铧 (45 cm) | Commercial / Field Scale | Large acreage tillage; requires front ballast weights. |
Rotary Cutter / MowerMowing & Clearing | 15 to 20 ft Batwing4.6 - 6.1 m 宽幅折叠翼 | Commercial / Field Scale | Large commercial field and roadside mowing operations. |
Rotary TillerSeedbed Prep | 90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机 | Commercial / Field Scale | Deep intensive seedbed preparation for commercial row crops. |
Disc HarrowSecondary Tillage | 15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙 | Commercial / Field Scale | Wide commercial field leveling; requires hydraulic remotes. |
Hay BalerHay & Forage | Large Square Baler (3x4 or 4x4)大方捆商用打捆机 (1.2x1.2 m) | Commercial / Field Scale | High-capacity commercial forage harvesting (1000 RPM PTO). |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Ursus 1654.
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Ursus 1654 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Ursus 1654.
Converted Equivalents:
Horsepower (HP)158.2 hp
Kilowatts (kW)118 kW
Metric Horsepower (PS / CV)160.4 PS
Direct Competitor Comparison
Compare Ursus 1654 against same-era industry alternatives in the same horsepower class.
Current Model
Ursus
Ursus 1654
Engine Power:Diesel (listed): 158.2 hp / 118.0 kW
★ Baseline Reference
Related models
Ursus 1434
- Power:
- 136
- Production years:
- 1991 - 2009
Ursus 1454
- Power:
- 145
Ursus 1634
- Power:
- 152.9
- Production years:
- 1991 - 2009
Ursus 1614
- Power:
- 155
- Production years:
- 1987 - 1989
Ursus 1674
- Power:
- 156.2
- Production years:
- 2009 - 2011