Valtra N114
The Valtra N114 is a tractor produced by Valtra. It is equipped with a 268.4 ci 4.4 L engine. The listed engine power is Diesel (listed): 114 hp / 85.0 kW. Transmission: Hi Tech. Operating weight: 13448 lbs 6100 kg.
Engine Power
Diesel (listed): 114 hp / 85.0 kW
Fuel & Capacities
62.1 gal
235.0 L
Transmission
Hi Tech
Operating Weight
13448 lbs
6100 kg
Overview
 | 2015 - 2020
N SeriesRow-Crop tractor
N Series
Row-Crop tractor |
|---|
Production | |
|---|---|
Manufacturer | Valtra (a part of AGCO) |
Row-Crop tractor | |
Valtra N114 Engine | |
|---|---|
AGCO Power 4.4L 4-cyl diesel | |
Fuel tank | 62.1 gal
235.0 L |
83.2 galOptOptional
314.9 L | |
42.3 gal (steel tank)
160.1 L | |
Exhaust fluid (DEF) | 11.9 gal
45.0 L |
Engine details ...  | |
Valtra N114 Transmission | |
|---|---|
30-speed five-speed power shift | |
Transmission details ...  |
Valtra N114 Power | |
|---|---|
Engine | 114 hp
85.0 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Power steering | |
Wet disc brakes | |
Cab standard with air-conditioning. |
Hydraulics | |
|---|---|
Type | open center |
closed center OptOptional | |
Rear valves | 2 to 5 |
Pump flow | 19.3 gpm (open)
73.1 lpm |
23.8 gpm (open option)
90.1 lpm | |
30.4 gpm (closed)
115.1 lpm | |
42.3 gpm (closed option)
160.1 lpm | |
52.8 gpm (closed option)
199.8 lpm | |
Tractor hitch | |
|---|---|
Rear lift | 14162 lbs
6423 kg |
17534 lbsOptOptional
7953 kg | |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 540/1000 |
Front PTO | independent OptOptional |
Front PTO Type | 1000 |
Dimensions & Tires | |
|---|---|
Wheelbase | 104.9 inches
266 cm |
Weight | 13448 lbs
6100 kg |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
Battery volts | 12 |
References | |
|---|---|
 | |
N Series published in 2019, by Valtra |
Engine
Engine Detail — 268.4 ci / 4.4 L Diesel
Manufacturer | AGCO Power 44 AWF |
Configuration | turbocharged intercooled diesel, 4-cylinder, liquid-cooled |
Displacement | 268.4 ci
4.4 L |
Bore/Stroke | 4.25x4.72 inches
108 x 120 mm |
Emissions | Stage 4 |
Power | 114 hp
85.0 kW |
Maximum Power | 123.4 hp
92.0 kW |
Rated RPM | 2100 |
Torque | 368.8 lb-ft
500.1 Nm |
Torque RPM | 1500 |
Starter | electric |
Starter volts | 12 |
Transmission
Transmission — Hi Tech
Transmission | Hi Tech |
Type | five-speed power shift |
Gears | 30 forward and reverse |
Dimensions
Valtra N114 Tires |
|---|
Dimensions | |
|---|---|
Wheelbase | 104.9 inches
266 cm |
Length | 183.3 inches
465 cm |
Height (cab) | 116.5 inches
295 cm |
Operating weight | 13448 lbs
6100 kg |
Max weight | 22046 lbs
10000 kg |
Ground clearance | 21.7 inches
55 cm |
Recommended Implements & Sizing Guide
Engineering recommendations for Valtra N114 based on its 114 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm) | Heavy Duty | Heavy primary tillage; semi-mounted hitch recommended. |
Rotary Cutter / MowerMowing & Clearing | 10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼 | Heavy Duty | Wide swath pasture and crop residue shredding. |
Rotary TillerSeedbed Prep | 90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机 | Commercial / Field Scale | Deep intensive seedbed preparation for commercial row crops. |
Disc HarrowSecondary Tillage | 10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙 | Heavy Duty | Aggressive residue cutting in corn/cotton stubble. |
Hay BalerHay & Forage | 5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机 | Heavy Duty | High density baling; requires minimum 85 PTO HP. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Valtra N114.
Estimated Continuous Field Runtime: 10.5 hrs
Approximately 10.5 hours of continuous field operation at ~75% rated power on a full tank (62.1 gal / 235.1 L).
Estimated 75% Load Fuel Burn~5.9 gal/hr (22.4 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Valtra N114 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Valtra N114.
Converted Equivalents:
Horsepower (HP)114 hp
Kilowatts (kW)85 kW
Metric Horsepower (PS / CV)115.6 PS
Direct Competitor Comparison
Compare Valtra N114 against same-era industry alternatives in the same horsepower class.
Current Model
Valtra
Valtra N114
Engine Power:Diesel (listed): 114 hp / 85.0 kW
★ Baseline Reference
Related models
Valtra A94
- Power:
- 92
- Production years:
- 2017 - 2020
Valtra 6200
- Power:
- 92.5
- Production years:
- 2003 - 2007
Valtra 6250Hi
- Power:
- 92.5
- Production years:
- 2004 - 2006
Valtra C90
- Power:
- 95
- Production years:
- 2004 - 2006
Valtra A104
- Power:
- 97
- Production years:
- 2017 - 2020