Zetor Proxima 100CL

The Zetor Proxima 100CL is a tractor produced by Zetor. It is equipped with a 253.6 ci 4.2 L engine. The listed engine power is Diesel (net): 96 hp / 71.6 kW. Transmission: 20 forward and 4 reverse. Operating weight: 10022 lbs 4545 kg.

Engine Power

Diesel (net): 96 hp / 71.6 kW

Fuel & Capacities

39.6 gal 149.9 L

Transmission

20 forward and 4 reverse

Operating Weight

10022 lbs 4545 kg

Overview

	2016 - Proxima SeriesUtility tractor
2016 -
Proxima Series
Utility tractor

Production
Manufacturer	Zetor
Utility tractor
Built in Brno, Czech Republic

Zetor Proxima 100CL Engine
Zetor 4.2L 4-cyl diesel
Fuel tank	39.6 gal 149.9 L
Engine details ...

Zetor Proxima 100CL Power
Engine (net)	96 hp 71.6 kW

Mechanical
Four-wheel drive
Power steering
Hydraulic wet disc brakes
Trailer brakes	pneumatic
	hydraulic OptOptional
Cab standard with optional air-conditioning.

Hydraulics
Pressure	2756 psi 190.0 bar
Valves	1 to 3
Total flow	13.2 gpm 50.0 lpm
	15.85 gpmOptOptional 60.0 lpm

Tractor hitch
Rear Type	II
Control	position control and mechanical top-link draft sensing
Rear lift	9442 lbs 4282 kg

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540/1000
	540/540E
Front PTO Type	1000

Dimensions & Tires
Wheelbase	90.9 inches 230 cm
Weight	10022 lbs 4545 kg
Front tire	320/85R24
Rear tire	420/85R34
Full dimensions and tires ...

Electrical
Charging system	alternator

Engine

Engine Detail — 253.6 ci / 4.2 L Diesel

Manufacturer	Zetor 1017
Configuration	turbocharged diesel, 4-cylinder 16-valve, liquid-cooled
Displacement	253.6 ci 4.2 L
Bore/Stroke	4.13x4.72 inches 105 x 120 mm
Emissions	Stage IV
Rated Power (net)	96 hp 71.6 kW
Rated RPM	2200
Starter type	electric

Transmission

Transmission options
10-speed synchromesh
12-speed synch shuttle
20-speed creeper

Transmission — 10 forward and 2 reverse synchromesh

Type	synchromesh
Gears	10 forward and 2 reverse

Transmission — 12 forward and reverse synch shuttle

Type	synch shuttle
Gears	12 forward and reverse
Transmission
Type	creeper
Gears	20 forward and 4 reverse

Dimensions

Zetor Proxima 100CL Tires
Standard tires (ag)	Front: 320/85R24. Rear: 420/85R34

Dimensions
Wheelbase	90.9 inches 230 cm
Length	185.4 inches 470 cm
Width	99 inches 251 cm
Height	112.2 inches 284 cm
Weight	10022 lbs 4545 kg

Recommended Implements & Sizing Guide

Engineering recommendations for Zetor Proxima 100CL based on its 96 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	78 to 84 in200 - 215 cm	Heavy Duty	Heavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Zetor Proxima 100CL.

Estimated Continuous Field Runtime: 7.9 hrs

Approximately 7.9 hours of continuous field operation at ~75% rated power on a full tank (39.6 gal / 149.9 L).

Estimated 75% Load Fuel Burn~5 gal/hr (18.9 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours