AGCO GT45
The AGCO GT45 is a tractor produced by Agco. It is equipped with a 183 ci 3.0 L engine. The listed engine power is Diesel (listed): 52 hp / 38.8 kW. Transmission: synchro-shuttle. Operating weight: 4806 to 5820 pounds.
Engine Power
Diesel (listed): 52 hp / 38.8 kW
Fuel & Capacities
23.7 gal
89.7 L
Transmission
synchro-shuttle
Operating Weight
4806 to 5820 pounds
Overview
 | 2004 - 2007
GT SeriesUtility tractor
GT Series
Utility tractor |
|---|
Production | |
|---|---|
Manufacturer | AGCO |
Utility tractor | |
Built in Italy | |
AGCO GT45 Engine | |
|---|---|
SAME Deutz-Fahr 3.0L 3-cyl diesel | |
Fuel tank | 23.7 gal
89.7 L |
Engine details ...  | |
AGCO GT45 Transmission | |
|---|---|
16-speed | |
Transmission details ...  |
AGCO GT45 Power | |
|---|---|
Engine | 52 hp
38.8 kW |
PTO (claimed) | 45 hp
33.6 kW |
Mechanical | |
|---|---|
Two- or four-wheel drive | |
Final drives | planetary |
Differential lock | mechanical rear |
Power steering | |
Wet disc brakes | |
Two-post folding ROPS. Cab optional with air-conditioning. | |
Hydraulics | |
|---|---|
Type | open center |
Pump flow | 14 gpm
53.0 lpm |
Total flow | 22.7 gpm
85.9 lpm |
Tractor hitch | |
|---|---|
Rear Type | II |
Rear lift (at 24"/610mm) | 3520 lbs
1596 kg |
Rear Arms | fixed |
telescopic OptOptional | |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Clutch | electro-hydraulic |
Rear PTO Type | 540/1000 (1.375) |
Engine RPM | 540@1967 |
1000@2043 | |
Dimensions & Tires | |
|---|---|
2WD Wheelbase | 82.9 inches
210 cm |
4WD Wheelbase | 80.9 inches
205 cm |
Weight | 4806 to 5820 pounds |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
Battery volts | 12 |
References | |
|---|---|
 | |
GT Series - Rugged Comfort published in 2003, by AGCO | |
GT Series published in 2003, by AGCO | |
GT Series published in 2004, by AGCO |
Engine
Engine Detail — 183 ci / 3.0 L Diesel
Manufacturer | SAME Deutz-Fahr |
Fuel Type | Diesel |
Configuration | 3-cylinder, liquid-cooled |
Displacement | 183 ci
3.0 L |
Bore/Stroke | 4.134x4.547 inches
105 x 115 mm |
Power | 52 hp
38.8 kW |
Air cleaner | dry element |
Rated RPM | 2200 |
Starter volts | 12 |
Transmission
Transmission — synchro-shuttle
Transmission | synchro-shuttle |
Gears | 16 forward and 8 reverse |
Clutch | dry disc |
Dimensions
AGCO GT45 Tires |
|---|
Dimensions | |
|---|---|
2WD Wheelbase | 82.9 inches
210 cm |
4WD Wheelbase | 80.9 inches
205 cm |
Length | 145.7 inches
370 cm |
Width | 70.4 inches
178 cm |
Height | 103.6 inches
263 cm |
2WD Front tread | 54.6 to 66.4 inches
138 to 168 cm |
4WD Front tread | 57.5 to 69.1 inches
146 to 175 cm |
Rear tread | 55.1 to 74.8 inches
139 to 189 cm |
AGCO GT45 Weight | |
|---|---|
2WD ROPS | 4806 lbs
2180 kg |
4WD ROPS | 5291 lbs
2399 kg |
2WD Cab | 5335 lbs
2419 kg |
4WD Cab | 5820 lbs
2639 kg |
Photos
AGCO GT45 tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for Agco GT45 based on its 52 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 2 to 3 Bottom (14-16")2 - 3 铧 (35-40 cm) | Medium Duty | Standard utility farm tillage. |
Rotary Cutter / MowerMowing & Clearing | 6 ft (72 in)1.8 m | Medium Duty | Medium pasture clearing; rear slip-clutch recommended. |
Rotary TillerSeedbed Prep | 66 to 72 in165 - 180 cm | Medium Duty | Standard utility tiller; slip clutch protection required. |
Disc HarrowSecondary Tillage | 7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙 | Medium Duty | Field leveling and clod breaking behind plows. |
Hay BalerHay & Forage | Small Square Baler (14x18")小方捆打捆机 (36x46 cm) | Medium Duty | Classic 2-string baler for horse and small livestock hay. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Agco GT45.
Estimated Continuous Field Runtime: 8.8 hrs
Approximately 8.8 hours of continuous field operation at ~75% rated power on a full tank (23.7 gal / 89.7 L).
Estimated 75% Load Fuel Burn~2.7 gal/hr (10.2 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Agco GT45 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Agco GT45.
Converted Equivalents:
Horsepower (HP)52 hp
Kilowatts (kW)38.8 kW
Metric Horsepower (PS / CV)52.7 PS
Direct Competitor Comparison
Compare AGCO GT45 against same-era industry alternatives in the same horsepower class.
Current Model
Agco
AGCO GT45
Engine Power:Diesel (listed): 52 hp / 38.8 kW
★ Baseline Reference
International HarvesterMarket Competitor
International Harvester 340
Engine Power:47
Production Years:1958 - 1963
Related models
AGCO ST45
- Power:
- 44.2
- Production years:
- 2001 - 2004
AGCO ST60A
- Power:
- 46.4
- Production years:
- 2007 - 2008
AGCO ST47A
- Power:
- 47.5
- Production years:
- 2005 - 2008
AGCO ST52A
- Power:
- 52.1
- Production years:
- 2005 - 2008
AGCO ST55
- Power:
- 55.6
- Production years:
- 2003 - 2004