AGCO Allis 8765
The AGCO Allis 8765 is a tractor produced by Agco Allis. It is equipped with a 239 ci 3.9 L engine. The listed engine power is 85.39 hp 63.7 kW. Transmission: 24 forward and reverse. Operating weight: 6820 to 8700 pounds.
Engine Power
85.39 hp
63.7 kW
Fuel & Capacities
5.3 gal/hour
20.1 l/hour
Transmission
24 forward and reverse
Operating Weight
6820 to 8700 pounds
Overview
 | 1998 - 1999
8700 SeriesUtility tractor
8700 Series
Utility tractor |
|---|
Production | |
|---|---|
Manufacturer | AGCO Allis (a part of AGCO) |
Utility tractor | |
Built in Beauvais, France | |
Original price | $39,408 (1998 gear 4WD ROPS ) |
$43,590 (1998 shuttle 4WD ROPS ) | |
$47,308 (1998 gear 4WD cab ) | |
$51,490 (1998 shuttle 4WD cab ) | |
Variants | |
|---|---|
6510 | similar White model |
AGCO Allis 8765 Power | |
|---|---|
PTO (claimed) | 85 hp
63.4 kW |
PTO (tested) | 88.01 hp
65.6 kW |
Performance test details ...  | |
Mechanical | |
|---|---|
Two- or four-wheel drive | |
Final drives | outboard planetary |
Differential lock | electro-hydraulic rear |
Power steering | |
Hydraulic wet disc brakes | |
Two-post folding ROPS. Cab with air-conditioning. | |
Hydraulics | |
|---|---|
Type | open center |
Pressure | 3045 psi
210.0 bar |
Valves | 2 or 3 |
Pump flow | 10 gpm (remotes)
37.9 lpm |
7 gpm (hitch)
26.5 lpm | |
SCV flow | 10 gpm
37.9 lpm |
17.9 gpm*Combined flow by locking out three-point hitch.
67.8 lpm | |
Total flow | 25.8 gpm
97.7 lpm |
Steering flow | 7.9 gpm
29.9 lpm |
Tractor hitch | |
|---|---|
Rear Type | II |
Control | electronic draft sensing |
Rear lift (at 24"/610mm) | 4100 lbs
1859 kg |
6200 lbsOptOptional
2812 kg | |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 540/1000 (1.375) |
Dimensions & Tires | |
|---|---|
Wheelbase | 99 inches
251 cm |
Weight | 6820 to 8700 pounds |
Front tire | 9.5L-15 |
Rear tire | 18.4R30 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
Battery volts | 12 |
References | |
|---|---|
 | |
New 8700/9700 Series Tractors published in 1997, by AGCO | |
8700 Series Tractors published in 2001, by AGCO | |
8745 - 8765 published in 1997, by AGCO |
Engine
Engine options | |
|---|---|
SisuDiesel 4.4L 4-cyl diesel | |
Cummins 3.9L 4-cyl diesel |
Engine Detail — 268 ci / 4.4 L Diesel
Manufacturer | SisuDiesel 444T |
Configuration | turbocharged diesel, 4-cylinder, liquid-cooled |
Displacement | 268 ci
4.4 L |
Bore/Stroke | 4.25x4.72 inches
108 x 120 mm |
Compression | 16.5:1 |
Rated RPM | 2200 |
Starter | electric |
Starter volts | 12 |
Engine Detail — 239 ci / 3.9 L Diesel
Manufacturer | Cummins B3.9T |
Configuration | turbocharged diesel, 4-cylinder, liquid-cooled inline |
Displacement | 239 ci
3.9 L |
Bore/Stroke | 4.02x4.72 inches
102 x 120 mm |
Compression | 16.5:1 |
Rated RPM | 2200 |
Starter | electric |
Starter volts | 12 |
Transmission
Transmission options | |
|---|---|
12-speed partially synchronized | |
12-speed synchronized shuttle | |
24-speed power shuttle |
Transmission — 12 forward and 4 reverse partially synchronized
Type | partially synchronized |
Gears | 12 forward and 4 reverse |
Transmission — 12 forward and reverse synchronized shuttle
Type | synchronized shuttle |
Gears | 12 forward and reverse |
Transmission — 24 forward and reverse power shuttle
Type | power shuttle |
Gears | 24 forward and reverse |
Dimensions
AGCO Allis 8765 Tires | |
|---|---|
Ag front | 9.5L-15 |
10-11-16 | |
11-00-16 | |
12.4R24 | |
13.6-24 | |
14.9-24 | |
Ag rear | 18.4R30 |
14.9-34 | |
16.9-34 | |
18.4-34 | |
16.9-38 | |
Dimensions | |
|---|---|
Wheelbase | 99 inches
251 cm |
Length | 165 inches
419 cm |
Width | 83 inches*Minimum width.
210 cm |
Height (cab) | 103 inches
261 cm |
2WD ROPS Weight | 6820 lbs
3093 kg |
4WD Cab Weight | 8700 lbs
3946 kg |
Flange rear axle | |
2WD Front tread | 60 to 88 inches
152 to 223 cm |
Tests
Tractor Tests | |
|---|---|
NTTL 1762: Cummins diesel 12-speed 4WD | |
NTTL 1768: Sisu diesel 12-speed 4WD |
Nebraska Tractor Test 1762 | |
|---|---|
Cummins diesel 12-speed 4WD
September 14 - 23, 1999
Link: Nebraska Tractor Test 1762 file | |
PTO performance | |
Max power | 88.01 hp
65.6 kW |
Fuel use | 5.2 gal/hour
19.7 l/hour |
Power at rated engine speed | 85.40 hp
63.7 kW |
Fuel use | 5.6 gal/hour
21.2 l/hour |
Power at rated PTO speed | 87.86 hp
65.5 kW |
Fuel use | 5.4 gal/hour
20.4 l/hour |
Nebraska Tractor Test 1768 | |
|---|---|
Sisu diesel 12-speed 4WD
March 15 - 17, 2000
Link: Nebraska Tractor Test 1768 file | |
PTO performance | |
Max power | 87.21 hp
65.0 kW |
Fuel use | 5.5 gal/hour
20.8 l/hour |
Power at rated engine speed | 85.39 hp
63.7 kW |
Fuel use | 5.6 gal/hour
21.2 l/hour |
Power at rated PTO speed | 87.19 hp
65.0 kW |
Fuel use | 5.3 gal/hour
20.1 l/hour |
Photos
AGCO Allis 8765 tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for Agco Allis 8765 based on its 85.39 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 3 to 4 Bottom (16")3 - 4 铧 (40 cm) | Heavy Duty | Suitable for medium loam and stubble turnover. |
Rotary Cutter / MowerMowing & Clearing | 7 to 8 ft (84-96 in)2.1 - 2.4 m | Heavy Duty | Heavy-duty twin spindle cutter for overgrown acreage. |
Rotary TillerSeedbed Prep | 78 to 84 in200 - 215 cm | Heavy Duty | Heavy commercial tiller with multi-speed gearbox. |
Disc HarrowSecondary Tillage | 10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙 | Heavy Duty | Aggressive residue cutting in corn/cotton stubble. |
Hay BalerHay & Forage | 4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机 | Heavy Duty | Silage and dry hay; 540 RPM PTO with slip-clutch. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Agco Allis 8765.
Estimated Continuous Field Runtime: 1.2 hrs
Approximately 1.2 hours of continuous field operation at ~75% rated power on a full tank (5.3 gal / 20.1 L).
Estimated 75% Load Fuel Burn~4.4 gal/hr (16.8 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Agco Allis 8765 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Agco Allis 8765.
Converted Equivalents:
Horsepower (HP)85.4 hp
Kilowatts (kW)63.7 kW
Metric Horsepower (PS / CV)86.6 PS
Direct Competitor Comparison
Compare AGCO Allis 8765 against same-era industry alternatives in the same horsepower class.
Current Model
Agco Allis
AGCO Allis 8765
Engine Power:85.39 hp
63.7 kW
★ Baseline Reference
Related models
AGCO Allis 5670
- Power:
- 69
- Production years:
- 1991 - 1999
AGCO Allis 6670
- Power:
- 69
- Production years:
- 1991 - 1999
AGCO Allis 8745
- Power:
- 77.8
- Production years:
- 1998 - 1999
AGCO Allis 6680
- Power:
- 79.3
- Production years:
- 1991 - 1997
AGCO Allis 5680
- Power:
- 80
- Production years:
- 1991 - 1997