allis chalmers 18 30
 | 1918 - 1921
Standard-tread tractor | 1918 - 1921 | Standard-tread tractor |
|---|---|---|---|
1918 - 1921 | |||
Standard-tread tractor | |||
1918 - 1921 | |
|---|---|
Standard-tread tractor |
Production | |
|---|---|
Manufacturer | Allis Chalmers |
Standard-tread tractor | |
Built in West Allis, Wisconsin, USA | |
Total built | 1160 |
Original price was $1,785 in 1919 | |
Originally named the Allis-Chalmers 15-30, the tractor was renamed 18-30 after the first Nebraska test. | |
Allis Chalmers 18-30 Engine | |
|---|---|
Allis Chalmers 7.6L 4-cyl gasoline | |
Fuel tank | 25 gal
94.6 L |
Aux. fuel | 7.75 gal
29.3 L |
Engine details ...  | |
Allis Chalmers 18-30 Transmission | |
|---|---|
2-speed unsynchronized gear | |
Transmission details ...  |
Allis Chalmers 18-30 Power | |
|---|---|
Drawbar (claimed) | 18 hp
13.4 kW |
Belt (claimed) | 30 hp
22.4 kW |
Plows | 3 |
Drawbar (tested) | 20.55 hp
15.3 kW |
Belt (tested) | 33.41 hp
24.9 kW |
Performance test details ...  | |
Mechanical | |
|---|---|
Two-wheel drive | |
Open operator station. |
Photos | |
|---|---|
 | |
Allis Chalmers 18-30 photos...  |
Dimensions & Tires | |
|---|---|
Weight | 6150 lbs
2789 kg |
Front tire | 36x6 |
Rear tire | 50x12 |
Full dimensions and tires ...  | |
18-30 Serial Numbers | |
|---|---|
Location: | front of shifter on transmission case |
1919 | 5000 |
---- | 5006 |
1920 | 5161 |
1921 | 6015 |
1922 | ???? |
FAQ: How to read a serial number table. | |
Belt Pulley | |
|---|---|
Diameter | 13 inches
33 cm |
Width | 8.5 inches
21 cm |
RPM | 930 |
References | |
|---|---|
 | |
18-30 4 Plow Tractor With Surplus Power published in 1921, by Allis Chalmers |
Recommended Products
Advertisement · Featured Tractor-Related Products
Hy-Gard Transmission & Hydraulic Oil
Genuine OEM Part Number: TY22000 An exclusive formulation, specifically designed to protect John Deere transmissions, final drives, and hydraulic systems.
RE198488 Cabin Air Filter Fits
Original 3-layer filter paper, made of synthetic fiber, has higher dustproof ability compared with ordinary 1-2 layers. It can remove 99% of 4 micron or larger particles, effectively protect the engine from harmful particles, and help to extend the service life of the vehicle.
John Deere Original Equipment Cool-Gard II PRE-Mix
COOL-GARD II PRE-MIX, 1 GAL;3.78L. DO NOT ADD WATER. Prediluted Engine Coolant. Heavy-duty, low-silicate, high performance antifreeze/coolant. This is a OEM John Deere Part.
Heavy Duty Pistol Grip Grease Gun Kit
🚜 Power Performance: 8000psi Max working pressure guaranteed by iron die cast head and enhanced sealing. 🚜 Ergonomic Design: Pistol grip lets you operate with one hand. Sand blasted grid surface increases friction for safety.
* This page contains affiliate links, purchases may generate revenue for this site