allis chalmers 8010
 | 1982 - 1985
8000 SeriesRow-Crop tractor | 1982 - 1985 | 8000 Series | Row-Crop tractor |
|---|---|---|---|---|
1982 - 1985 | ||||
8000 Series | ||||
Row-Crop tractor | ||||
1982 - 1985 | |
|---|---|
8000 Series | |
Row-Crop tractor |
Production | |
|---|---|
Manufacturer | Allis Chalmers |
Row-Crop tractor | |
Built in West Allis, Wisconsin, USA | |
Total built | 1,832 |
Original price | $46,176 |
Variants | |
|---|---|
8010 | row-crop |
8010HC | high-crop |
Allis Chalmers 8010 Engine | |
|---|---|
Allis Chalmers 4.9L 6-cyl diesel | |
Engine details ...  |
Allis Chalmers 8010 Transmissions | |
|---|---|
16-speed partial power shift | |
20-speed partial power shift | |
12-speed Allis-Chalmers | |
Transmission details ...  |
Allis Chalmers 8010 Power | |
|---|---|
Drawbar (tested) | 91.46 hp
68.2 kW |
PTO (tested) | 107.38 hp
80.1 kW |
Performance test details ...  | |
Mechanical | |
|---|---|
Two- or four-wheel drive | |
Differential lock | electro-hydraulic rear |
Steering | hydrostatic power |
Differential hydraulic wet discs brakes | |
Acousta cab standard with heat and air-conditioning. Optional radio and cassette tape player. | |
Photos | |
|---|---|
 | |
Allis Chalmers 8010 photos...  |
Capacity | |
|---|---|
Fuel | 60 gal
227.1 L |
| 25 gal (optional tank)
94.6 L |
Rear diff. | 66.8 qts
63.2 L |
Hydraulics | |
|---|---|
Type | load-sensitive |
Valves | 2 or 3 |
Pump flow | 22 gpm
83.3 lpm |
| 13.5 gpm (transmission)
51.1 lpm |
Total flow | 45 gpm
170.3 lpm |
Steering flow | 9.5 gpm
36.0 lpm |
Tractor hitch | |
|---|---|
Rear Type | II |
Rear lift (at 24"/610mm) | 6,680 lbs
3030 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 540/1000 |
Dimensions & Tires | |
|---|---|
2WD Wheelbase | 106 inches
269 cm |
4WD Wheelbase | 96 inches
243 cm |
Weight | 12630 to 13600 pounds |
Front tire | 10.00-16 |
Rear tire | 18.4-38 |
Full dimensions and tires ...  | |
8010 Serial Number Location | |
|---|---|
 | |
Main frame, left side |
8010 Serial Numbers | |
|---|---|
1981 | 1001 |
1982 | 1020 |
1983 | 1712 |
1984 | 2266 |
1985 | 2609 |
Final | 2832 |
FAQ: How to read a serial number table. | |
Electrical | |
|---|---|
Charging system | alternator |
Charging amps | 100 |
Battery volts | 12 |
References | |
|---|---|
 | |
8070 - 8050 - 8030 - 8010 published in 1983, by Allis Chalmers | |
Agri-Data System published in 1982, by Allis Chalmers |
Recommended Products
Advertisement · Featured Tractor-Related Products
Tractor Backhoe Attachment with Mechanical Thumb
The MechMaxx BH660 backhoe is a reliable solution for a wide range of digging and excavation tasks. Designed to fit CAT I 3-point hitch tractors, it requires a minimum of 15 PTO horsepower and a tractor weight of at least 1,500 lbs. This backhoe is ideal for ditching on farms and grazing lands, digging pools, cleaning waterways, as well as assistant excavating work in construction and building roads.
Powtol AM125424 Oil Filter
3" O.D, 2-1/4" long, 3/4"-16 thread, 28 micron filter, 7 to 9 PSI relief, To ensure the optimal performance of your engine, please verify your engine's model and part numbers before ordering the parts.
Turf-Gard SAE 10W-30 Oil TWO Quarts
4-Cycle engine oil For gas engines only SAE 10W-30 Provides maximum protection for lawn and utility equipment 946mL / 32 fl. Oz per quart - TWO quarts included
RE198488 Cabin Air Filter Fits
Original 3-layer filter paper, made of synthetic fiber, has higher dustproof ability compared with ordinary 1-2 layers. It can remove 99% of 4 micron or larger particles, effectively protect the engine from harmful particles, and help to extend the service life of the vehicle.
* This page contains affiliate links, purchases may generate revenue for this site