allis chalmers h3
 | 1960 - 1967
Agricultural Crawler tractor | 1960 - 1967 | Agricultural Crawler tractor |
|---|---|---|---|
1960 - 1967 | |||
Agricultural Crawler tractor | |||
1960 - 1967 | |
|---|---|
Agricultural Crawler tractor |
Production | |
|---|---|
Manufacturer | Allis Chalmers |
Agricultural Crawler tractor | |
Built in Springfield, Illinois, USA | |
The Allis-Chalmers H3 crawler was based on the gas-powered D15 farm tractor. | |
Variants | |
|---|---|
H3 | gas engine |
HD3 | diesel engine |
Allis Chalmers H3 Engine | |
|---|---|
Allis Chalmers 2.4L 4-cyl gasoline | |
Engine details ...  |
Allis Chalmers H3 Transmissions | |
|---|---|
8-speed two-speed power shift | |
4-speed mechanical shuttle | |
Transmission details ...  |
Allis Chalmers H3 Power | |
|---|---|
Drawbar (tested) | 25.48 hp
19.0 kW |
PTO (tested) | 32.11 hp
23.9 kW |
Performance test details ...  | |
Mechanical | |
|---|---|
Drive | crawler |
Steering | mechanical clutches |
Mechanical contracting band brakes | |
Open operator station. | |
Photos | |
|---|---|
 | |
Allis Chalmers H3 photos...  |
Capacity | |
|---|---|
Fuel | 14 gal
53.0 L |
Hydraulic system | 16.5 gal
62.5 L |
Hydraulics | |
|---|---|
Type | open center |
Capacity | 16.5 gal
62.5 L |
Valves | 1 to 3 |
Pump flow | 15 gpm
56.8 lpm |
| 25 gpm (optional)
94.6 lpm |
Power Take-off (PTO) | |
|---|---|
Rear PTO | optional |
Rear PTO Type | 540 |
Dimensions & Tracks | |
|---|---|
Wheelbase | 64 inches
162 cm |
Weight | 7395 lbs
3354 kg |
7-inch tracks | |
Full dimensions and tracks ...  | |
Allis Chalmers H3 attachments | |
|---|---|
blade | |
front-end loader | |
backhoe | |
Attachment details ...  |
H3 Serial Numbers | |
|---|---|
1960 | 1001 |
1961 | 1250 |
1962 | 3199 |
1963 | 6001 |
1964 | 6945 |
1965 | 7890 |
1966 | 8856 |
1967 | 9483 |
FAQ: How to read a serial number table. | |
References | |
|---|---|
 | |
H3 / HD-3 Industrial Crawler Tractors published in 1967, by Allis Chalmers | |
Industrial Tractor Equipment published in 1962, by Allis Chalmers | |
Farm Crawlers published in 1962, by Allis Chalmers |
Recommended Products
Advertisement · Featured Tractor-Related Products
Powtol AM125424 Oil Filter
3" O.D, 2-1/4" long, 3/4"-16 thread, 28 micron filter, 7 to 9 PSI relief, To ensure the optimal performance of your engine, please verify your engine's model and part numbers before ordering the parts.
Tractor Backhoe Attachment with Mechanical Thumb
The MechMaxx BH660 backhoe is a reliable solution for a wide range of digging and excavation tasks. Designed to fit CAT I 3-point hitch tractors, it requires a minimum of 15 PTO horsepower and a tractor weight of at least 1,500 lbs. This backhoe is ideal for ditching on farms and grazing lands, digging pools, cleaning waterways, as well as assistant excavating work in construction and building roads.
2 Pack 3/8" Tractor Bucket Grab Hook
Grade 70 level 3/8 Grab Hook Bolt-On Mount with Backer Plate and for Installation.
Air Filter Replacement
Fitment: 11013-0752 air filter replacement for Jonh-Deere MIU12555, BobCat 4164631, Gravely 21548000, Stens 054-259, Rotary 12758, Oregon 30-164
* This page contains affiliate links, purchases may generate revenue for this site