Branson 6530C
The Branson 6530C is a tractor produced by Branson. It is equipped with a 198.9 ci 3.3 L engine. The listed engine power is Diesel (gross): 65 hp / 48.5 kW. Transmission: 24 forward and reverse. Operating weight: 5,808 lbs 2634 kg.
Engine Power
Diesel (gross): 65 hp / 48.5 kW
Fuel & Capacities
24 gal
90.8 L
Transmission
24 forward and reverse
Operating Weight
5,808 lbs
2634 kg
Overview
 | 2005 - ???? | 2005 - ???? |
|---|
2005 - ???? |
|---|
Production | |
|---|---|
Manufacturer | Branson |
Variants | |
|---|---|
6530R | ROPS |
6530C | cab |
Branson 6530C Engine | |
|---|---|
Cummins 3.3L 4-cyl diesel | |
Fuel tank | 24 gal
90.8 L |
Engine details ...  | |
Branson 6530C Transmission | |
|---|---|
24-speed synchronized shuttle | |
Transmission details ...  |
Branson 6530C Power | |
|---|---|
Engine (gross) | 65 hp
48.5 kW |
PTO (claimed) | 57 hp
42.5 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Steering | hydrostatic power |
Wet disc brakes | |
Cab with heat and air-conditioning. | |
Tractor hitch | |
|---|---|
Rear Type | II |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 540/680/1000 |
Dimensions & Tires | |
|---|---|
Wheelbase | 80 inches
203 cm |
Weight | 5,808 lbs
2634 kg |
Front tire | 11.2-20 |
Rear tire | 14.9-30 |
Full dimensions and tires ...  | |
Engine
| 2005 - ???? | 2005 - ???? |
|---|
2005 - ???? |
|---|
Engine Detail — 198.9 ci / 3.3 L Diesel
Manufacturer | Cummins B3.3 |
Fuel Type | Diesel |
Configuration | 4-cylinder, liquid-cooled |
Displacement | 198.9 ci
3.3 L |
Bore/Stroke | 3.74x4.52 inches
95 x 115 mm |
Power (gross) | 65 hp
48.5 kW |
Air cleaner | dry element |
Pre-heating | block heater (optional) |
Compression | 18:1 |
Rated RPM | 2600 |
Starter type | electric |
Transmission
| 2005 - ???? | 2005 - ???? |
|---|
2005 - ???? |
|---|
Transmission — 24 forward and reverse synchronized shuttle
Type | synchronized shuttle |
Gears | 24 forward and reverse |
Dimensions
| 2005 - ???? | 2005 - ???? |
|---|
2005 - ???? |
|---|
Branson 6530C Tires | |
|---|---|
Ag front | 11.2-20 |
Ag rear | 14.9-30 |
Dimensions | |
|---|---|
Wheelbase | 80 inches
203 cm |
Length | 143.6 inches
364 cm |
Width | 69 inches
175 cm |
Height (cab) | 100 inches
254 cm |
Weight | 5,808 lbs
2634 kg |
Ground clearance | 14 inches
35 cm |
Front tread | 49.4 to 64 inches
125 to 162 cm |
Rear tread | 50 to 61.2 inches
127 to 155 cm |
Photos
Branson 6530C tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for Branson 6530C based on its 65 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 3 to 4 Bottom (16")3 - 4 铧 (40 cm) | Heavy Duty | Suitable for medium loam and stubble turnover. |
Rotary Cutter / MowerMowing & Clearing | 7 to 8 ft (84-96 in)2.1 - 2.4 m | Heavy Duty | Heavy-duty twin spindle cutter for overgrown acreage. |
Rotary TillerSeedbed Prep | 78 to 84 in200 - 215 cm | Heavy Duty | Heavy commercial tiller with multi-speed gearbox. |
Disc HarrowSecondary Tillage | 7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙 | Medium Duty | Field leveling and clod breaking behind plows. |
Hay BalerHay & Forage | 4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机 | Heavy Duty | Silage and dry hay; 540 RPM PTO with slip-clutch. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Branson 6530C.
Estimated Continuous Field Runtime: 7.1 hrs
Approximately 7.1 hours of continuous field operation at ~75% rated power on a full tank (24 gal / 90.8 L).
Estimated 75% Load Fuel Burn~3.4 gal/hr (12.8 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Branson 6530C Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Branson 6530C.
Converted Equivalents:
Horsepower (HP)65 hp
Kilowatts (kW)48.5 kW
Metric Horsepower (PS / CV)65.9 PS
Direct Competitor Comparison
Compare Branson 6530C against same-era industry alternatives in the same horsepower class.
Current Model
Branson
Branson 6530C
Engine Power:Diesel (gross): 65 hp / 48.5 kW
★ Baseline Reference
Related models
Branson 5220C
- Power:
- 55
- Production years:
- 2012 - 2021
Branson 5220CH
- Power:
- 55
- Production years:
- 2016 - 2020
Branson 5220H
- Power:
- 55
- Production years:
- 2016 - 2020
Branson 5220R
- Power:
- 55
- Production years:
- 2011 - 2021
Branson 5520C
- Power:
- 55
- Production years:
- 2021 - 2026