Cameco 145-B
The Cameco 145-B is a tractor produced by Cameco. It is equipped with a 425 ci 7.0 L engine. The listed engine power is Diesel (listed): 145 hp / 108.1 kW. Transmission: Allison. Operating weight: 12015 lbs 5450 kg.
Engine Power
Diesel (listed): 145 hp / 108.1 kW
Fuel & Capacities
65 gal
246.0 L
Transmission
Allison
Operating Weight
12015 lbs
5450 kg
Overview
 | Standard-tread tractor | Standard-tread tractor |
|---|
Production | |
|---|---|
Manufacturer | Cameco |
Standard-tread tractor | |
Built in Thibodaux, Louisiana, USA | |
Cameco 145-B Engine | |
|---|---|
Caterpillar 7.0L 4-cyl diesel | |
Engine details ...  |
Cameco 145-B Transmission | |
|---|---|
5-speed | |
Transmission details ...  |
Cameco 145-B Power | |
|---|---|
Engine | 145 hp
108.1 kW |
Mechanical | |
|---|---|
Two-wheel drive | |
Final drives | inboard planetary |
Hydraulic wet disc brakes | |
Two-post ROPS with canopy. Cab optional with air-conditioning. | |
Capacity | |
|---|---|
Fuel | 65 gal
246.0 L |
Hydraulic system | 20.1 gal
76.1 L |
Hydraulics | |
|---|---|
Type | open center |
Capacity | 20.1 gal
76.1 L |
Pressure | 2200 psi
151.7 bar |
Valves | 2 to 4 |
Pump flow | 26 gpm
98.4 lpm |
Tractor hitch | |
|---|---|
Rear Type | III OptOptional |
Dimensions & Tires | |
|---|---|
Wheelbase | 118 inches
299 cm |
Weight | 12015 lbs
5450 kg |
Front tire | 11.0x16 |
Rear tire | 18.4x34 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Charging system | alternator |
Charging amps | 60 |
Batteries | 2 |
Battery CCA | 620 |
Battery volts | 12 |
References | |
|---|---|
 | |
145-B published by Cameco |
Engine
Engine Detail — 425 ci / 7.0 L Diesel
Manufacturer | Caterpillar 3304T |
Configuration | turbocharged diesel, 4-cylinder, liquid-cooled |
Displacement | 425 ci
7.0 L |
Bore/Stroke | 4.75x6.00 inches
121 x 152 mm |
Power | 145 hp
108.1 kW |
Rated RPM | 2200 |
Torque | 415 lb-ft
562.7 Nm |
Torque RPM | 1500 |
Starter | electric |
Starter volts | 12 |
Transmission
Transmission — Allison
Transmission | Allison |
Gears | 5 forward and 1 reverse |
Dimensions
Cameco 145-B Tires | |
|---|---|
Ag front | 11.0x16 |
Ag rear | 18.4x34 |
Ag front | 12.4x24 |
Ag rear | 18.4x38 |
20.8x38 | |
Dimensions | |
|---|---|
Wheelbase | 118 inches
299 cm |
Length | 188 inches
477 cm |
Width | 93 inches
236 cm |
Height (ROPS) | 120.9 inches
307 cm |
Shipping weight | 12015 lbs
5450 kg |
Max weight | 16005 lbs
7259 kg |
Ground clearance | 20 inches
50 cm |
Front tread | 68 inches
172 cm |
Rear tread | 68 inches
172 cm |
Photos
Cameco 145-B tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for Cameco 145-B based on its 145 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 5 to 7 Bottom (18")5 - 7 铧 (45 cm) | Commercial / Field Scale | Large acreage tillage; requires front ballast weights. |
Rotary Cutter / MowerMowing & Clearing | 10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼 | Heavy Duty | Wide swath pasture and crop residue shredding. |
Rotary TillerSeedbed Prep | 90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机 | Commercial / Field Scale | Deep intensive seedbed preparation for commercial row crops. |
Disc HarrowSecondary Tillage | 15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙 | Commercial / Field Scale | Wide commercial field leveling; requires hydraulic remotes. |
Hay BalerHay & Forage | 5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机 | Heavy Duty | High density baling; requires minimum 85 PTO HP. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Cameco 145-B.
Estimated Continuous Field Runtime: 8.6 hrs
Approximately 8.6 hours of continuous field operation at ~75% rated power on a full tank (65 gal / 246.1 L).
Estimated 75% Load Fuel Burn~7.5 gal/hr (28.5 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Cameco 145-B Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Cameco 145-B.
Converted Equivalents:
Horsepower (HP)145 hp
Kilowatts (kW)108.1 kW
Metric Horsepower (PS / CV)147 PS
Direct Competitor Comparison
Compare Cameco 145-B against same-era industry alternatives in the same horsepower class.
Current Model
Cameco
Cameco 145-B
Engine Power:Diesel (listed): 145 hp / 108.1 kW
★ Baseline Reference
Related models
Cameco 205
- Power:
- 120
- Production years:
- 1967 - 1977
Cameco 235-B
- Power:
- 145
- Production years:
- 1974 - 1984
Cameco 305-B
- Power:
- 165
- Production years:
- 1969 - 1979
Cameco 110-T
- Power:
- 106
- Production years:
- 2002 - 2006
Cameco 220T
- Power:
- 185
- Production years:
- 1996 - 2006