Cameco 110-T
The Cameco 110-T is a tractor produced by Cameco. It is equipped with a 276 ci 4.5 L engine. The listed engine power is Diesel (listed): 106 hp / 79.0 kW. Transmission: 5 forward and 3 reverse. Operating weight: 8,930 lbs 4050 kg.
Engine Power
Diesel (listed): 106 hp / 79.0 kW
Fuel & Capacities
25.7 gal
97.3 L
Transmission
5 forward and 3 reverse
Operating Weight
8,930 lbs
4050 kg
Overview
 | 2002 - 2006 |
|---|
Production | |
|---|---|
Manufacturer | Cameco |
Built in Thibodaux, Louisiana, USA | |
Cameco 110-T Engine | |
|---|---|
John Deere 4.5L 4-cyl diesel | |
Engine details ...  |
Cameco 110-T Transmission | |
|---|---|
5-speed power shift | |
Transmission details ...  |
Cameco 110-T Power | |
|---|---|
Engine | 106 hp
79.0 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Hydraulic wet disc brakes | |
ROPS canopy. Cab optional? |
Capacity | |
|---|---|
Fuel | 25.7 gal
97.3 L |
Hydraulic system | 22 gal
83.3 L |
Hydraulics | |
|---|---|
Type | open center |
Capacity | 22 gal
83.3 L |
Pressure | 2800 psi
193.1 bar |
Valves | 2 |
Pump flow | 27 gpm
102.2 lpm |
Tractor hitch | |
|---|---|
Rear Type | II (optional) |
Rear lift | 6,870 lbs
3116 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO Type | 540 (optional) |
1000 (optional) | |
Dimensions & Tires | |
|---|---|
Weight | 8,930 lbs
4050 kg |
Front tire | 12.4x24 |
Rear tire | 18.4x30 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Charging system | alternator |
Charging amps | 65 |
Batteries | 2 |
Battery CCA | 925 |
Battery volts | 12 |
Engine
Engine Detail — 276 ci / 4.5 L Diesel
Manufacturer | John Deere 4045T PowerTech |
Configuration | turbocharged diesel, 4-cylinder, liquid-cooled |
Displacement | 276 ci
4.5 L |
Bore/Stroke | 4.173x5.00 inches
106 x 127 mm |
Power | 106 hp
79.0 kW |
Rated RPM | 2200 |
Torque | 296 lb-ft
401.4 Nm |
Torque RPM | 1200 |
Starter | electric |
Starter volts | 12 |
Oil capacity | 14 qts
13.2 L |
Transmission
Transmission — 5 forward and 3 reverse power shift
Type | power shift |
Gears | 5 forward and 3 reverse |
Oil capacity | 13 qts
12.3 L |
Dimensions
Cameco 110-T Tires | |
|---|---|
Ag front | 12.4x24 |
Ag rear | 18.4x30 |
Dimensions | |
|---|---|
Shipping weight | 8,930 lbs
4050 kg |
Photos
Cameco 110-T tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for Cameco 110-T based on its 106 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm) | Heavy Duty | Heavy primary tillage; semi-mounted hitch recommended. |
Rotary Cutter / MowerMowing & Clearing | 10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼 | Heavy Duty | Wide swath pasture and crop residue shredding. |
Rotary TillerSeedbed Prep | 90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机 | Commercial / Field Scale | Deep intensive seedbed preparation for commercial row crops. |
Disc HarrowSecondary Tillage | 10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙 | Heavy Duty | Aggressive residue cutting in corn/cotton stubble. |
Hay BalerHay & Forage | 5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机 | Heavy Duty | High density baling; requires minimum 85 PTO HP. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Cameco 110-T.
Estimated Continuous Field Runtime: 4.7 hrs
Approximately 4.7 hours of continuous field operation at ~75% rated power on a full tank (25.7 gal / 97.3 L).
Estimated 75% Load Fuel Burn~5.5 gal/hr (20.9 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Cameco 110-T Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Cameco 110-T.
Converted Equivalents:
Horsepower (HP)106 hp
Kilowatts (kW)79 kW
Metric Horsepower (PS / CV)107.5 PS
Direct Competitor Comparison
Compare Cameco 110-T against same-era industry alternatives in the same horsepower class.
Current Model
Cameco
Cameco 110-T
Engine Power:Diesel (listed): 106 hp / 79.0 kW
★ Baseline Reference
Related models
Cameco 205
- Power:
- 120
- Production years:
- 1967 - 1977
Cameco 220T
- Power:
- 185
- Production years:
- 1996 - 2006
Cameco 805
- Power:
- 600
- Production years:
- 1994 - 2003
Cameco 505
- Power:
- 325
- Production years:
- 1980 - 1990
Cameco 345-B
- Power:
- 250
- Production years:
- 1976 - 2006