CaseIH Puma 160
The CaseIH Puma 160 is a tractor produced by Caseih. It is equipped with a 410.6 ci 6.7 L engine. The listed engine power is Diesel (gross): 160 hp / 119.3 kW. Transmission: EconoGear. Operating weight: 16360 lbs 7420 kg.
Engine Power
Diesel (gross): 160 hp / 119.3 kW
Fuel & Capacities
86 gal
325.5 L
Transmission
EconoGear
Operating Weight
16360 lbs
7420 kg
Overview
 | 2011 - 2013
Puma SeriesRow-Crop tractor
Puma Series
Row-Crop tractor |
|---|
Production | |
|---|---|
Manufacturer | CaseIH |
Row-Crop tractor | |
CaseIH Puma 160 Engine | |
|---|---|
FPT 6.7L 6-cyl diesel | |
Engine details ...  |
CaseIH Puma 160 Power | |
|---|---|
Engine (gross) | 160 hp
119.3 kW |
Engine (max) | 203 hp
151.4 kW |
PTO (claimed) | 135 hp
100.7 kW |
Drawbar (tested) | 118.5 hp
88.4 kW |
PTO (tested) | 155.8 hp
116.2 kW |
Performance test details ...  | |
Mechanical | |
|---|---|
Four-wheel drive | |
Cab standard. Optional cab suspension. |
Capacity | |
|---|---|
Fuel | 86 gal
325.5 L |
Exhaust fluid (DEF) | 12.7 gal
48.1 L |
Hydraulic system | 20.5 gal
77.6 L |
Hydraulics | |
|---|---|
Type | closed center pressure flow compensating (PFC) |
Capacity | 20.5 gal
77.6 L |
Rear valves | 3 to 4 (mechanical) |
3 to 5 (electronic) | |
Pump flow | 29 gpm
109.8 lpm |
32 gpm (optional)
121.1 lpm | |
Tractor hitch | |
|---|---|
Rear Type | 2/3N |
Rear lift | 7,900 lbs
3583 kg |
9,200 lbs (optional)
4173 kg | |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 540/1000 (1.75) |
Dimensions & Tires | |
|---|---|
Wheelbase | 107.6 inches
273 cm |
109.8 inches (suspended front axle)
278 cm | |
Weight | 16360 lbs
7420 kg |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
Charging amps | 150 |
200 OptOptional | |
Batteries | 2 |
Battery CCA | 650 |
Battery volts | 12 |
References | |
|---|---|
 | |
Puma Series Tractors published in 2010, by CaseIH | |
Puma Series Tractors published in 2011, by CaseIH |
Engine
Engine Detail — 410.6 ci / 6.7 L Diesel
Manufacturer | FPT |
Configuration | turbocharged diesel, 6-cylinder, liquid-cooled |
Displacement | 410.6 ci
6.7 L |
Bore/Stroke | 4.094x5.197 inches
104 x 132 mm |
Emissions | Interim Tier 4 |
Emission control | selective catalytic reduction (SCR) |
Rated Power (gross) | 160 hp
119.3 kW |
Maximum Power (gross) | 203 hp
151.4 kW |
Rated RPM | 2200 |
Starter | electric |
Starter volts | 12 |
Oil capacity | 16 qts
15.1 L |
Transmission
Transmission options | |
|---|---|
18-speed full power shift | |
19-speed full power shift | |
continuously variable transmission (CVT) |
Transmission — 18 forward and 6 reverse full power shift
Type | full power shift |
Gears | 18 forward and 6 reverse |
Clutch | electro-hydraulic wet disc |
Transmission — EconoGear
Transmission | EconoGear |
Type | full power shift |
Gears | 19 forward and 6 reverse |
Clutch | electro-hydraulic wet disc |
Adds transport gear to the power shift, providing road speed at reduced engine RPMs. | |
Transmission — infinite forward and reverse continuously variable transmission (CVT)
Type | continuously variable transmission (CVT) |
Gears | infinite forward and reverse |
 | |
Dimensions
CaseIH Puma 160 Tires |
|---|
Dimensions | |
|---|---|
Wheelbase | 107.6 inches
273 cm |
109.8 inches (suspended front axle)
278 cm | |
Operating weight | 16360 lbs
7420 kg |
Flange rear axle | |
Bar rear axle | 3.625 by 98 inches
92 by 2489 mm |
Bar rear axle | 3.625 by 112 inches
92 by 2844 mm |
Front tread | 61.4 to 88.8 inches
155 to 225 cm |
Tests
OCED Tractor Test 2653 | |
|---|---|
Diesel CVT 4WD
May 2011 - September 2011,
Link: OCED Tractor Test 2653 file | |
PTO performance | |
Max power | 155.8 hp
116.2 kW |
Fuel use | 8.4 gal/hour
31.8 l/hour |
Power at rated engine speed | 144.3 hp
107.6 kW |
Fuel use | 8.3 gal/hour
31.4 l/hour |
Power at rated PTO speed | 151.5 hp
113.0 kW |
Fuel use | 8.4 gal/hour
31.8 l/hour |
Drawbar performance | |
Max power | 118.5 hp
88.4 kW |
Fuel use | 8.4 gal/hour
31.8 l/hour |
Pull at 7.5 KPH | |
Max pull | 13915 lbs
6311 kg |
Pull at 5.0 KPH | |
Photos
CaseIH Puma 160
CaseIH Puma 160
CaseIH Puma 160
CaseIH Puma 160
Recommended Implements & Sizing Guide
Engineering recommendations for Caseih Puma 160 based on its 160 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 5 to 7 Bottom (18")5 - 7 铧 (45 cm) | Commercial / Field Scale | Large acreage tillage; requires front ballast weights. |
Rotary Cutter / MowerMowing & Clearing | 15 to 20 ft Batwing4.6 - 6.1 m 宽幅折叠翼 | Commercial / Field Scale | Large commercial field and roadside mowing operations. |
Rotary TillerSeedbed Prep | 90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机 | Commercial / Field Scale | Deep intensive seedbed preparation for commercial row crops. |
Disc HarrowSecondary Tillage | 15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙 | Commercial / Field Scale | Wide commercial field leveling; requires hydraulic remotes. |
Hay BalerHay & Forage | Large Square Baler (3x4 or 4x4)大方捆商用打捆机 (1.2x1.2 m) | Commercial / Field Scale | High-capacity commercial forage harvesting (1000 RPM PTO). |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Caseih Puma 160.
Estimated Continuous Field Runtime: 10.3 hrs
Approximately 10.3 hours of continuous field operation at ~75% rated power on a full tank (86 gal / 325.5 L).
Estimated 75% Load Fuel Burn~8.3 gal/hr (31.5 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Caseih Puma 160 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Caseih Puma 160.
Converted Equivalents:
Horsepower (HP)160 hp
Kilowatts (kW)119.3 kW
Metric Horsepower (PS / CV)162.2 PS
Direct Competitor Comparison
Compare CaseIH Puma 160 against same-era industry alternatives in the same horsepower class.
Current Model
Caseih
CaseIH Puma 160
Engine Power:Diesel (gross): 160 hp / 119.3 kW
★ Baseline Reference
International HarvesterMarket Competitor
International Harvester 1086
Engine Power:144.4
Production Years:1976 - 1981
Related models
CaseIH Vestrum 130
- Power:
- 128.2
- Production years:
- 2020 - 2026
CaseIH 2096
- Power:
- 128.9
- Production years:
- 1985 - 1989
CaseIH Maxxum 120
- Power:
- 129
- Production years:
- 2007 - 2014
CaseIH MXM130
- Power:
- 129
- Production years:
- 2002 - 2007
CaseIH CVX 130
- Power:
- 130
- Production years:
- 2000 - 2003