CaseIH Steiger 715 Quadtrac

The CaseIH Steiger 715 Quadtrac is a tractor produced by Caseih. It is equipped with a 970 ci 15.9 L engine. The listed engine power is Diesel (gross): 705.2 hp / 525.9 kW. Transmission: PowerDrive. Drive type: articulated crawler. Operating weight: 61200 lbs 27760 kg.

Engine Power

Diesel (gross): 705.2 hp / 525.9 kW

Drive & Traction

articulated crawler

Fuel & Capacities

520 gal 1968.2 L

Transmission

PowerDrive

Operating Weight

61200 lbs 27760 kg

Overview

	2024 - Steiger Quadtrac SeriesArticulated Crawler tractor
2024 -
Steiger Quadtrac Series
Articulated Crawler tractor

Production
Manufacturer	CaseIH (a part of CNH)
Articulated Crawler tractor

CaseIH Steiger 715 Quadtrac Engine
FPT 15.9L 6-cyl diesel
Fuel tank	520 gal 1968.2 L
Exhaust fluid (DEF)	85 gal 321.7 L
Engine details ...

CaseIH Steiger 715 Quadtrac Transmission
17-speed full power shift
Transmission details ...

CaseIH Steiger 715 Quadtrac Power
Engine (gross)	705.2 hp 525.9 kW
Engine (max)	767.3 hp 572.2 kW
PTO (claimed)	529.6 hp 394.9 kW

Mechanical
Drive	articulated crawler
Final drives	planetary
Articulated power steering
Cab standard with air-conditioning.

Hydraulics
Type	closed center
Valves	4 to 8
Pump flow	57 gpm 215.7 lpm
	113 gpmOptOptional 427.7 lpm
SCV flow	35 gpm 132.5 lpm

Tractor hitch
Rear Type	IVN
Rear lift (at 24"/610mm)	22250 lbs 10092 kg
Drawbar	Cat 5

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	1000 (1.75)

Dimensions & Tracks
Wheelbase	154 inches 391 cm
Weight	61200 lbs 27760 kg
Tracks
Full dimensions and tracks ...

Electrical
Ground	negative
Charging system	alternator
Charging amps	240
	330 OptOptional
Batteries	3
Battery CCA	950
Battery volts	12

References

TAFS Connect Steiger published in 2024, by New Holland

Engine

Engine Detail — 970 ci / 15.9 L Diesel

Manufacturer	FPT Cursor 16
Configuration	turbocharged diesel, 6-cylinder 24-valve, liquid-cooled
Displacement	970 ci 15.9 L
Bore/Stroke	5.55x6.69 inches 141 x 170 mm
Emissions	Tier IV
Rated Power (gross)	705.2 hp 525.9 kW
Maximum Power (gross)	767.3 hp 572.2 kW
Rated RPM	2100
Starter	electric
Starter volts	12

CaseIH Steiger 715 Quadtrac Engine

Transmission

Transmission — PowerDrive

Transmission	PowerDrive
Type	full power shift
Gears	17 forward and 2 reverse

CaseIH Steiger 715 Quadtrac Transmission

Dimensions

CaseIH Steiger 715 Quadtrac Tracks

Dimensions
Wheelbase	154 inches 391 cm
Front axle	Flange: 88 inch length 2235 mm
Flange rear axle	88 inch length 2235 mm

CaseIH Steiger 715 Quadtrac Weight
Shipping	61200 lbs 27760 kg
Max capacity	72000 lbs 32659 kg
Max Drawbar	15000 lbs 6804 kg

Photos

CaseIH Steiger 715 Quadtrac tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Caseih Steiger 715 Quadtrac based on its 705.2 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	8+ Bottom On-Land Hitch8+ 铧重型机外牵引犁	Commercial / Field Scale	High horsepower articulated/4WD field plowing.
Rotary Cutter / MowerMowing & Clearing	15 to 20 ft Batwing4.6 - 6.1 m 宽幅折叠翼	Commercial / Field Scale	Large commercial field and roadside mowing operations.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	24 to 36 ft Heavy Duty Field Disc7.3 - 11.0 m 超宽重型整地耙	Commercial / Field Scale	Broad-acre grain tillage for high-drawbar tractors.
Hay BalerHay & Forage	Large Square Baler (3x4 or 4x4)大方捆商用打捆机 (1.2x1.2 m)	Commercial / Field Scale	High-capacity commercial forage harvesting (1000 RPM PTO).

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Caseih Steiger 715 Quadtrac.

Estimated Continuous Field Runtime: 14.2 hrs

Approximately 14.2 hours of continuous field operation at ~75% rated power on a full tank (520 gal / 1968.4 L).

Estimated 75% Load Fuel Burn~36.7 gal/hr (138.8 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours