Challenger MT265
The Challenger MT265 is a tractor produced by Challenger. It is equipped with a 91.4 ci 1.5 L engine. The listed engine power is Diesel (gross): 33 hp / 24.6 kW. Transmission: infinite forward and reverse (3-range). Operating weight: 3,041 lbs 1379 kg.
Overview
![]() | 2003 - 2005
MT200 SeriesCompact Utility tractorIseki built
MT200 Series
Compact Utility tractor
Iseki built |
|---|
Production | |
|---|---|
Distributor | Challenger (a part of AGCO) |
Manufacturer | Iseki |
Compact Utility tractor | |
Built in Matsuyama, Japan | |
Variants | |
|---|---|
1433 | similar Massey Ferguson model |
Challenger MT265 Engine | |
|---|---|
Iseki 1.5L 3-cyl diesel | |
Fuel tank | 7.9 gal
29.9 L |
Engine details ... | |
Challenger MT265 Power | |
|---|---|
Engine (gross) | 33 hp
24.6 kW |
Gear PTO (claimed) | 27 hp
20.1 kW |
Hydro PTO (claimed) | 25 hp
18.6 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Differential lock | mechanical rear |
Power steering | |
Wet disc brakes | |
Two-post folding ROPS. | |
Hydraulics | |
|---|---|
Type | open center |
Pump flow | 7.7 gpm
29.1 lpm |
Total flow | 12.2 gpm (gear)
46.2 lpm |
9.6 gpm (hydro)
36.3 lpm | |
Steering flow | 4.5 gpm
17.0 lpm |
Tractor hitch | |
|---|---|
Rear Type | I |
Control | position control |
draft control OptOptional | |
Rear lift (at ends) | 2,755 lbs (gear)
1249 kg |
2,866 lbs (hydro)
1300 kg | |
Rear lift (at 24"/610mm) | 2,100 lbs (gear)
952 kg |
1,940 lbs (hydro)
879 kg | |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Clutch | wet disc |
Rear PTO Type | 540 (1.375) |
Mid PTO | independent OptOptional |
Mid PTO Type | 2000 |
Dimensions & Tires | |
|---|---|
Wheelbase | 68.5 inches
173 cm |
Weight | 3,041 lbs
1379 kg |
Front tire | 7-16 |
Rear tire | 12.6-24 |
Full dimensions and tires ... | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
Battery volts | 12 |
References | |
|---|---|
![]() | |
MT200 - Serious Machines with big tractor performance published in 2002, by AGCO |
Engine
Engine Detail — 91.4 ci / 1.5 L Diesel
Manufacturer | Iseki |
Fuel Type | Diesel |
Configuration | 3-cylinder, liquid-cooled |
Displacement | 91.4 ci
1.5 L |
Bore/Stroke | 3.43x3.30 inches
87 x 84 mm |
Power (gross) | 33 hp
24.6 kW |
Rated RPM | 2600 |
Starter | electric |
Starter volts | 12 |
Transmission
Transmission options | |
|---|---|
16-speed power shuttle | |
hydrostatic |
Transmission — 16 forward and reverse power shuttle
Type | power shuttle |
Gears | 16 forward and reverse |
Four synchronized gears (1-4) in four ranges with power shuttle. | |
Transmission — infinite forward and reverse (3-range) hydrostatic
Type | hydrostatic |
Gears | infinite forward and reverse (3-range) |
Dimensions
Challenger MT265 Tires | |
|---|---|
Standard tires (ag) | Front: 7-16. Rear: 12.6-24 |
Lawn/turf front | 212/80D-15 |
Lawn/turf rear | 355/80D-20 |
Lawn/turf front | 305R343 |
Lawn/turf rear | 610R470 |
Industrial front | 25x8.50-14 |
Industrial rear | 15-19.5 |
Industrial front | 10-16.5 |
Industrial rear | 14.9-24 |
Dimensions | |
|---|---|
Wheelbase | 68.5 inches
173 cm |
Length | 121.5 inches
308 cm |
Width | 60.6 inches
153 cm |
Height (ROPS) | 93.2 inches
236 cm |
Height (Folded ROPS) | 70.8 inches
179 cm |
Weight | 3,041 lbs
1379 kg |
Front tread | 44 inches
111 cm |
Rear tread | 45 to 56.8 inches
114 to 144 cm |
Attachments
Attachment overview | |
|---|---|
72" mid-mount mower deck | |
Snowblower | |
Blade | |
Front-end loader | |
Backhoe |
72" Mower deck | |
|---|---|
Type | mid-mount Challenger MG716 |
3-blade | |
Cutting width | 72 inches
182 cm |
Challenger MH20 Backhoe | |
|---|---|
Backhoe type | Challenger MH20 Backhoe |
Transport height | 72.8 inches
184 cm |
Bucket width | 10 inches
25 cm |
12 inches
30 cm | |
16 inches
40 cm | |
24 inches
60 cm | |
37 inches
93 cm | |
2-Foot flat digging depth | 96 inches
243 cm |
Reach from pivot | 112.2 inches
284 cm |
Bucket Rotation | 165° |
Swing Arc | 180° |
Photos
Recommended Implements & Sizing Guide
Engineering recommendations for Challenger MT265 based on its 33 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 2 to 3 Bottom (14-16")2 - 3 铧 (35-40 cm) | Medium Duty | Standard utility farm tillage. |
Rotary Cutter / MowerMowing & Clearing | 5 ft (60 in)1.5 m | Medium Duty | Pasture maintenance and weeds up to 1.5" diameter. |
Rotary TillerSeedbed Prep | 54 to 60 in135 - 150 cm | Medium Duty | Thorough seedbed preparation in orchards and vegetable plots. |
Disc HarrowSecondary Tillage | 5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片) | Light Duty | Small acreage soil break-up and secondary aeration. |
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Challenger MT265.
Estimated Continuous Field Runtime: 4.6 hrs
Approximately 4.6 hours of continuous field operation at ~75% rated power on a full tank (7.9 gal / 29.9 L).
Engine Crankcase Oil
Transmission & Hydraulic System
Engine Cooling System
Challenger MT265 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Challenger MT265.
Converted Equivalents:
Direct Competitor Comparison
Compare Challenger MT265 against same-era industry alternatives in the same horsepower class.
Challenger MT265
International Harvester 274
Related models
Challenger MT255
- Power:
- 28.4
- Production years:
- 2003 - 2005
Challenger MT255B
- Power:
- 28.4
- Production years:
- 2005 - 2008
Challenger MT265B
- Power:
- 33
- Production years:
- 2005 - 2008
Challenger MT851
- Power:
- 504.2
- Production years:
- 2021 - 2026
Challenger MT856
- Power:
- 556.5
- Production years:
- 2021 - 2026


