Challenger MT485E

The Challenger MT485E is a tractor produced by Challenger. It is equipped with a 299 ci 4.9 L engine. The rated power output is 140 hp 104.4 kW. Transmission: TechStar CVT. Operating weight: 15432 lbs 6999 kg.

Engine Power
140 hp 104.4 kW
Fuel & Capacities
67 gal 253.6 L
Transmission
TechStar CVT
Operating Weight
15432 lbs 6999 kg

Challenger MT485E Serial Number & Year Decoder

Find the exact manufacture year of your tractor by checking your chassis serial number below.

Where to Find the Serial NumberThe serial number plate is commonly located on the front frame, tractor transmission housing (right side), or instrument panel badge.

Overview

Challenger MT485E tractor photo
2017 - 2020 MT400E SeriesUtility tractor
2017 - 2020
MT400E Series
Utility tractor
Production
Manufacturer
Challenger (a part of AGCO)
Utility tractor
Built in France
Variants
6715S
similar Massey Ferguson model
Challenger MT485E Engine
AGCO Power 4.9L 4-cyl diesel
Fuel tank
67 gal 253.6 L
Exhaust fluid (DEF)
7.9 gal 29.9 L
Engine details ...
Challenger MT485E Power
Engine
140 hp 104.4 kW
PTO (claimed)
130 hp 96.9 kW
Drawbar (tested)
124.6 hp 92.9 kW
PTO (tested)
144 hp 107.4 kW
Performance test details ...
Mechanical
Four-wheel drive
Differential lock
electro-hydraulic front and rear
Power steering
Hydraulic wet disc brakes
Cab standard with air-conditioning. Auto-Guide 3000 ((Optional))
Hydraulics
Type
open center
Valves
up to 5
Pump flow
26 gpm 98.4 lpm
29 gpmOptOptional 109.8 lpm
50 gpmOptOptional 189.2 lpm
Tractor hitch
Rear Type
III/II
Rear lift (at 24"/610mm)
11244 lbs 5100 kg
Rear Arms
telescopic link end
Power Take-off (PTO)
Rear PTO
independent
Rear PTO Type
540/1000
540/540E/1000/1000E
Dimensions & Tires
Wheelbase
105 inches 266 cm
Weight
15432 lbs 6999 kg
Full dimensions and tires ...
Electrical
Ground
negative
Charging system
alternator
Charging amps
175
240 *Total charging capacity with optional twin 120A system.
Battery volts
12
References
MT485E references literature
MT400E Series Tractors published in 2016, by AGCO

Engine

Engine Detail — 299 ci / 4.9 L Diesel

Manufacturer
AGCO Power
Configuration
intercooled turbocharged diesel, 4-cylinder, liquid-cooled
Displacement
299 ci 4.9 L
Bore/Stroke
4.251x5.276 inches 108 x 134 mm
Emissions
Tier IV
Emission control
selective catalytic reduction
Power
140 hp 104.4 kW
Maximum Power
150 hp 111.9 kW
Fuel system
high-pressure common rail direct injection
Rated RPM
2100
Torque
623 lb-ft 844.8 Nm
Torque RPM
1600
Starter
electric
Starter volts
12

Transmission

Transmission options
16-speed four-speed power shift
24-speed six-speed power shift
continuously-variable transmission

Transmission — AutoPower IV

Transmission
AutoPower IV
Type
four-speed power shift
Gears
16 forward and reverse
Clutch
hydraulic wet disc

Transmission — AutoPower VI

Transmission
AutoPower VI
Type
six-speed power shift
Gears
24 forward and reverse
Clutch
hydraulic wet disc

Transmission — TechStar CVT

Transmission
TechStar CVT
Type
continuously-variable transmission
Gears
infinite forward and reverse

Dimensions

Challenger MT485E Tires
Dimensions
Wheelbase
105 inches 266 cm
Width
72 inches*Minimum width 182 cm
Shipping weight
15432 lbs 6999 kg
Flange rear axle
Bar rear axle

Tests

OCED Tractor Test 3031
Diesel AutoPower IV 4WD October 2016 - 2016, Link: OCED Tractor Test 3031 file
PTO performance
Max power
144 hp 107.4 kW
Fuel use
8.6 gal/hour 32.6 l/hour
Power at rated engine speed
132.4 hp 98.7 kW
Fuel use
8.3 gal/hour 31.4 l/hour
Power at rated PTO speed
139.5 hp 104.0 kW
Fuel use
8.6 gal/hour 32.6 l/hour
Drawbar performance
Max power
124.6 hp 92.9 kW
Fuel use
8.7 gal/hour 32.9 l/hour
Gear 3A used for power test.
Max pull
12950 lbs 5874 kg
Gear 1B used for pull test.

Photos

Challenger MT485E tractor photo

Challenger MT485E tractor photo