Challenger MT575E

The Challenger MT575E is a tractor produced by Challenger. It is equipped with a 449 ci 7.4 L engine. The listed engine power is Diesel (gross): 200 hp / 149.1 kW. Transmission: TechStar.

Engine Power

Diesel (gross): 200 hp / 149.1 kW

Fuel & Capacities

114 gal 431.5 L

Transmission

TechStar

Overview

	2015 - 2020 MT500E SeriesRow-Crop tractor MT500E Series Row-Crop tractor

Production
Manufacturer	Challenger (a part of AGCO)
Row-Crop tractor
Built in Jackson, Minnesota, USA

Variants
7722	similar Massey Ferguson model

Challenger MT575E Engine
AGCO Power 7.4L 6-cyl diesel
Engine details ...

Challenger MT575E Power
Engine (gross)	200 hp 149.1 kW
Engine (max)	240 hp 179.0 kW
PTO (claimed)	165 hp 123.0 kW
Drawbar (tested)	146.3 hp 109.1 kW
PTO (tested)	205.2 hp 153.0 kW
Performance test details ...

Mechanical
Four-wheel drive
Differential lock	electro-hydraulic front and rear
Power steering
Hydraulic wet disc brakes
Cab standard with air-conditioning. Auto-Guide 3000

Capacity
Fuel	114 gal 431.5 L
Exhaust fluid (DEF)	11 gal 41.6 L
Hydraulic system	26.4 gal 99.9 L

Hydraulics
Type	closed-center load sensing
Capacity	26.4 gal 99.9 L
Pressure	2900 psi 200.0 bar
Valves	4
SCV flow	26.4 gpm 99.9 lpm
Total flow	29 gpm 109.8 lpm
	39 gpm*Optional with AutoPower VI 147.6 lpm
	50 gpm*Optional with CVT 189.2 lpm

Tractor hitch
Rear Type	III/IIIN
Rear lift (at ends)	13500 lbs 6123 kg
	16700 lbs*Lift capacity with CVT transmission. 7575 kg
Front Hitch	IIIN OptOptional
Front lift (at ends)	7954 lbs 3607 kg

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540/540E/1000
	540E/1000E/1000 OptOptional
	540/540E/1000/1000E *With CVT transmission.

Dimensions & Tires
Wheelbase	117 inches 297 cm
Full dimensions and tires ...

Electrical
Ground	negative
Charging system	alternator
Battery volts	12

References

MT500E Series Tractors published in 2015, by AGCO

Engine

Engine Detail — 449 ci / 7.4 L Diesel

Manufacturer	AGCO Power
Configuration	turbocharged intercooled diesel, 6-cylinder, liquid-cooled
Displacement	449 ci 7.4 L
Bore/Stroke	4.252x5.276 inches 108 x 134 mm
Emissions	Tier IV
Emission control	selective catalytic reduction (SCR)
Rated Power (gross)	200 hp 149.1 kW
Maximum Power (gross)	240 hp 179.0 kW
Air cleaner	dry element
Compression	17.8:1
Rated RPM	2100
Starter	electric
Starter volts	12

Transmission

Transmission options
24-speed six-speed power shift
continuously-variable transmission (CVT)

Transmission — AutoPower VI

Transmission	AutoPower VI
Type	six-speed power shift
Gears	24 forward and reverse

Transmission — TechStar

Transmission	TechStar
Type	continuously-variable transmission (CVT)
Gears	infinite forward and reverse

Dimensions

Challenger MT575E Tires

Dimensions
Wheelbase	117 inches 297 cm

Tests

Tractor Tests
OECD 2936: diesel CVT 4WD
OECD 2935: diesel AutoPower VI 4WD

OCED Tractor Test 2936
Diesel CVT 4WD November 2016 - January 2016, Link: OCED Tractor Test 2936 file
PTO performance
Max power	205.2 hp 153.0 kW
Fuel use	11.6 gal/hour 43.9 l/hour
Power at rated engine speed	184.7 hp 137.7 kW
Fuel use	11.4 gal/hour 43.1 l/hour
Power at rated PTO speed	205.2 hp 153.0 kW
Fuel use	11.6 gal/hour 43.9 l/hour
Drawbar performance
Max power	142.8 hp 106.5 kW
Fuel use	11.4 gal/hour 43.1 l/hour
Pull at 7.76KPH
Max pull	16590 lbs 7525 kg
Pull at 2.64KPH

OCED Tractor Test 2935
Diesel AutoPower VI 4WD September 2015 - November 2015, Link: OCED Tractor Test 2935 file
PTO performance
Max power	201.8 hp 150.5 kW
Fuel use	10.9 gal/hour 41.3 l/hour
Power at rated engine speed	176.2 hp 131.4 kW
Fuel use	10.6 gal/hour 40.1 l/hour
Power at rated PTO speed	192.0 hp 143.2 kW
Fuel use	11.0 gal/hour 41.6 l/hour
Drawbar performance
Max power	146.3 hp 109.1 kW
Fuel use	10.8 gal/hour 40.9 l/hour
Gear 3B used for power test.
Max pull	15535 lbs 7046 kg
Gear 1C used for pull test.

Photos

Challenger MT575E tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Challenger MT575E based on its 200 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	5 to 7 Bottom (18")5 - 7 铧 (45 cm)	Commercial / Field Scale	Large acreage tillage; requires front ballast weights.
Rotary Cutter / MowerMowing & Clearing	15 to 20 ft Batwing4.6 - 6.1 m 宽幅折叠翼	Commercial / Field Scale	Large commercial field and roadside mowing operations.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙	Commercial / Field Scale	Wide commercial field leveling; requires hydraulic remotes.
Hay BalerHay & Forage	Large Square Baler (3x4 or 4x4)大方捆商用打捆机 (1.2x1.2 m)	Commercial / Field Scale	High-capacity commercial forage harvesting (1000 RPM PTO).

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Challenger MT575E.

Estimated Continuous Field Runtime: 11 hrs

Approximately 11 hours of continuous field operation at ~75% rated power on a full tank (114 gal / 431.5 L).

Estimated 75% Load Fuel Burn~10.4 gal/hr (39.4 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours