Challenger MT595E
The Challenger MT595E is a tractor produced by Challenger. It is equipped with a 449 ci 7.4 L engine. The listed engine power is Diesel (gross): 240 hp / 179.0 kW. Transmission: TechStar.
Engine Power
Diesel (gross): 240 hp / 179.0 kW
Fuel & Capacities
114 gal
431.5 L
Transmission
TechStar
Overview
![]() | 2015 - 2020
MT500E SeriesRow-Crop tractor
MT500E Series
Row-Crop tractor |
|---|
Production | |
|---|---|
Manufacturer | Challenger (a part of AGCO) |
Row-Crop tractor | |
Built in Jackson, Minnesota, USA | |
Variants | |
|---|---|
7726 | similar Massey Ferguson model |
Challenger MT595E Engine | |
|---|---|
AGCO Power 7.4L 6-cyl diesel | |
Engine details ... |
Challenger MT595E Power | |
|---|---|
Engine (gross) | 240 hp
179.0 kW |
Engine (max) | 280 hp
208.8 kW |
PTO (claimed) | 200 hp
149.1 kW |
Drawbar (tested) | 169.6 hp
126.5 kW |
PTO (tested) | 235.9 hp
175.9 kW |
Performance test details ... | |
Mechanical | |
|---|---|
Four-wheel drive | |
Differential lock | electro-hydraulic front and rear |
Power steering | |
Hydraulic wet disc brakes | |
Cab standard with air-conditioning. Auto-Guide 3000 | |
Capacity | |
|---|---|
Fuel | 114 gal
431.5 L |
Exhaust fluid (DEF) | 11 gal
41.6 L |
Hydraulic system | 26.4 gal
99.9 L |
Hydraulics | |
|---|---|
Type | closed-center load sensing |
Capacity | 26.4 gal
99.9 L |
Pressure | 2900 psi
200.0 bar |
Valves | 4 |
SCV flow | 26.4 gpm
99.9 lpm |
Total flow | 29 gpm
109.8 lpm |
39 gpm*Optional with AutoPower VI
147.6 lpm | |
50 gpm*Optional with CVT
189.2 lpm | |
Tractor hitch | |
|---|---|
Rear Type | III/IIIN |
Rear lift (at ends) | 13500 lbs
6123 kg |
16700 lbs*Lift capacity with CVT transmission.
7575 kg | |
Front Hitch | IIIN OptOptional |
Front lift (at ends) | 7954 lbs
3607 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 540/540E/1000 |
540E/1000E/1000 OptOptional | |
540/540E/1000/1000E *With CVT transmission. | |
Dimensions & Tires | |
|---|---|
Wheelbase | 117 inches
297 cm |
Full dimensions and tires ... | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
Battery volts | 12 |
References | |
|---|---|
![]() | |
MT500E Series Tractors published in 2015, by AGCO |
Engine
Engine Detail — 449 ci / 7.4 L Diesel
Manufacturer | AGCO Power |
Configuration | turbocharged intercooled diesel, 6-cylinder, liquid-cooled |
Displacement | 449 ci
7.4 L |
Bore/Stroke | 4.252x5.276 inches
108 x 134 mm |
Emissions | Tier IV |
Emission control | selective catalytic reduction (SCR) |
Rated Power (gross) | 240 hp
179.0 kW |
Maximum Power (gross) | 280 hp
208.8 kW |
Air cleaner | dry element |
Compression | 17.8:1 |
Rated RPM | 2100 |
Starter | electric |
Starter volts | 12 |
Transmission
Transmission options | |
|---|---|
24-speed six-speed power shift | |
continuously-variable transmission (CVT) |
Transmission — AutoPower VI
Transmission | AutoPower VI |
Type | six-speed power shift |
Gears | 24 forward and reverse |
Transmission — TechStar
Transmission | TechStar |
Type | continuously-variable transmission (CVT) |
Gears | infinite forward and reverse |
Dimensions
Challenger MT595E Tires |
|---|
Dimensions | |
|---|---|
Wheelbase | 117 inches
297 cm |
Tests
Tractor Tests | |
|---|---|
OECD 2938: diesel CVT 4WD | |
OECD 2915: diesel AutoPower VI 4WD |
OCED Tractor Test 2938 | |
|---|---|
Diesel CVT 4WD
November 2015 - January 2016,
Link: OCED Tractor Test 2938 file | |
PTO performance | |
Max power | 235.9 hp
175.9 kW |
Fuel use | 13.3 gal/hour
50.3 l/hour |
Power at rated engine speed | 215.1 hp
160.4 kW |
Fuel use | 13.0 gal/hour
49.2 l/hour |
Power at rated PTO speed | 235.9 hp
175.9 kW |
Fuel use | 13.3 gal/hour
50.3 l/hour |
Drawbar performance | |
Max power | 166.2 hp
123.9 kW |
Fuel use | 12.7 gal/hour
48.1 l/hour |
Pull at 7.91KPH | |
Max pull | 16520 lbs
7493 kg |
Pull at 2.73KPH | |
OCED Tractor Test 2915 | |
|---|---|
Diesel AutoPower VI 4WD
July 2015 - August 2015,
Link: OCED Tractor Test 2915 file | |
PTO performance | |
Max power | 227.7 hp
169.8 kW |
Fuel use | 12.7 gal/hour
48.1 l/hour |
Power at rated engine speed | 208.0 hp
155.1 kW |
Fuel use | 12.2 gal/hour
46.2 l/hour |
Power at rated PTO speed | 227.0 hp
169.3 kW |
Fuel use | 12.6 gal/hour
47.7 l/hour |
Drawbar performance | |
Max power | 169.6 hp
126.5 kW |
Fuel use | 12.3 gal/hour
46.6 l/hour |
Gear 3B used for power test. | |
Max pull | 18095 lbs
8207 kg |
Gear 1D used for pull test. | |
Photos
Recommended Implements & Sizing Guide
Engineering recommendations for Challenger MT595E based on its 240 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 8+ Bottom On-Land Hitch8+ 铧重型机外牵引犁 | Commercial / Field Scale | High horsepower articulated/4WD field plowing. |
Rotary Cutter / MowerMowing & Clearing | 15 to 20 ft Batwing4.6 - 6.1 m 宽幅折叠翼 | Commercial / Field Scale | Large commercial field and roadside mowing operations. |
Rotary TillerSeedbed Prep | 90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机 | Commercial / Field Scale | Deep intensive seedbed preparation for commercial row crops. |
Disc HarrowSecondary Tillage | 24 to 36 ft Heavy Duty Field Disc7.3 - 11.0 m 超宽重型整地耙 | Commercial / Field Scale | Broad-acre grain tillage for high-drawbar tractors. |
Hay BalerHay & Forage | Large Square Baler (3x4 or 4x4)大方捆商用打捆机 (1.2x1.2 m) | Commercial / Field Scale | High-capacity commercial forage harvesting (1000 RPM PTO). |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Challenger MT595E.
Estimated Continuous Field Runtime: 9.1 hrs
Approximately 9.1 hours of continuous field operation at ~75% rated power on a full tank (114 gal / 431.5 L).
Estimated 75% Load Fuel Burn~12.5 gal/hr (47.2 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Challenger MT595E Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Challenger MT595E.
Converted Equivalents:
Horsepower (HP)240 hp
Kilowatts (kW)179 kW
Metric Horsepower (PS / CV)243.3 PS
Direct Competitor Comparison
Compare Challenger MT595E against same-era industry alternatives in the same horsepower class.
Current Model
Challenger
Challenger MT595E
Engine Power:Diesel (gross): 240 hp / 179.0 kW
★ Baseline Reference
Related models
Challenger MT575D
- Power:
- 200
- Production years:
- 2012 - 2014
Challenger MT575E
- Power:
- 200
- Production years:
- 2015 - 2020
Challenger MT585B
- Power:
- 200
- Production years:
- 2010 - 2012
Challenger MT645
- Power:
- 200
- Production years:
- 2002 - 2003
Challenger 35
- Power:
- 210
- Production years:
- 1995 - 1998


