challenger mt645e
 | 2014 - 2020
MT600E SeriesRow-Crop tractor | 2014 - 2020 | MT600E Series | Row-Crop tractor |
|---|---|---|---|---|
2014 - 2020 | ||||
MT600E Series | ||||
Row-Crop tractor | ||||
2014 - 2020 | |
|---|---|
MT600E Series | |
Row-Crop tractor |
Production | |
|---|---|
Manufacturer | Challenger (a part of AGCO) |
Row-Crop tractor | |
Built in Jackson, Minnesota, USA | |
Variants | |
|---|---|
8727 | similar Massey Ferguson model |
Challenger MT645E Engine | |
|---|---|
AGCO POWER 8.4L 6-cyl diesel | |
Fuel tank | 166 gal
628.3 L |
Exhaust fluid (DEF) | 15.8 gal
59.8 L |
Engine details ...  | |
Challenger MT645E Transmission | |
|---|---|
continuously variable transmission (CVT) | |
Transmission details ...  |
Challenger MT645E Power | |
|---|---|
Engine | 240 hp
179.0 kW |
PTO (claimed) | 205 hp
152.9 kW |
Drawbar (tested) | 209.1 hp
155.9 kW |
PTO (tested) | 242.6 hp
180.9 kW |
Performance test details ...  | |
Mechanical | |
|---|---|
Four-wheel drive | |
Differential lock | electro-hydraulic |
Steering | hydrostatic power |
Hydraulic wet disc brakes | |
Cab standard with air-conditioning. Optional OptiRide Plus hydraulic cab suspension. AgCommand ready; AUTO-GUIDE 3000 | |
Photos | |
|---|---|
 | |
Challenger MT645E photos...  |
Hydraulics | |
|---|---|
Type | closed center load sensing (CCLS) |
Pressure | 2900 psi
200.0 bar |
Valves | 4 to 6 |
Pump flow | 54 gpm
204.4 lpm |
Tractor hitch | |
|---|---|
Rear Type | III/IVN |
Rear lift (at ends) | 26455 lbs
11999 kg |
Drawbar | Cat. 3 |
| Cat 3 Heavy Duty (optional) |
| Cat 4 (optional) |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 1000/1000E (1.75) |
Dimensions & Tires | |
|---|---|
Wheelbase | 122 inches
309 cm |
Weight | 23810 lbs
10800 kg |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
Charging amps | 240 (twin 120A) |
Charging volts | 12 |
Battery volts | 12 |
References | |
|---|---|
 | |
MT600E Series - An MVP on Any Field published in 2014, by AGCO | |
MT600E Series published in 2017, by AGCO |
Recommended Products
Advertisement · Featured Tractor-Related Products
Heavy Duty Pistol Grip Grease Gun Kit
🚜 Power Performance: 8000psi Max working pressure guaranteed by iron die cast head and enhanced sealing. 🚜 Ergonomic Design: Pistol grip lets you operate with one hand. Sand blasted grid surface increases friction for safety.
John Deere Original Equipment Cool-Gard II PRE-Mix
COOL-GARD II PRE-MIX, 1 GAL;3.78L. DO NOT ADD WATER. Prediluted Engine Coolant. Heavy-duty, low-silicate, high performance antifreeze/coolant. This is a OEM John Deere Part.
Turf-Gard SAE 10W-30 Oil TWO Quarts
4-Cycle engine oil For gas engines only SAE 10W-30 Provides maximum protection for lawn and utility equipment 946mL / 32 fl. Oz per quart - TWO quarts included
Hy-Gard Transmission & Hydraulic Oil
Genuine OEM Part Number: TY22000 An exclusive formulation, specifically designed to protect John Deere transmissions, final drives, and hydraulic systems.
* This page contains affiliate links, purchases may generate revenue for this site