chamberlain 55da
 | 1954 - 1957
Standard-tread tractor | 1954 - 1957 | Standard-tread tractor |
|---|---|---|---|
1954 - 1957 | |||
Standard-tread tractor | |||
1954 - 1957 | |
|---|---|
Standard-tread tractor |
Production | |
|---|---|
Manufacturer | Chamberlain |
Standard-tread tractor | |
Built in Welshpool, Australia | |
Total built | 341 |
Variants | |
|---|---|
55KA | kerosene engine |
55DA | diesel engine |
Chamberlain 55DA Engine | |
|---|---|
Chamberlain 6.6L 2-cyl diesel | |
Fuel tank | 36 gal
136.3 L |
Aux. fuel | 1.2 gal
4.5 L |
Engine details ...  | |
Chamberlain 55DA Transmission | |
|---|---|
9-speed gear | |
Transmission details ...  |
Chamberlain 55DA Power | |
|---|---|
Drawbar (claimed) | 52 hp
38.8 kW |
Belt (claimed) | 54.6 hp
40.7 kW |
Mechanical | |
|---|---|
Two-wheel drive | |
Final drives | bull gears |
Manual steering | |
Mechanical brakes | |
Open operator station. | |
Power Take-off (PTO) | |
|---|---|
Rear PTO Type | 540 (1.375) |
Dimensions & Tires | |
|---|---|
Wheelbase | 83 inches
210 cm |
Weight | 9000 lbs
4082 kg |
Front tire | 8.25x20 |
Rear tire | 18x26 |
Full dimensions and tires ...  | |
55DA Serial Numbers | |
|---|---|
6/1954 | 101 |
1/1955 | 110 |
12/1955 | 281 |
7/1956 | 431 |
Final | 441 |
FAQ: How to read a serial number table. | |
Belt Pulley | |
|---|---|
Diameter | 13 inches
33 cm |
Width | 7 inches
17 cm |
RPM | 810 |
Speed | 2740 ft/min
835.15 meters/min |
References | |
|---|---|
 | |
55DA Tractor published in 1955, by Chamberlain |
Recommended Products
Advertisement · Featured Tractor-Related Products
AM116304: Inline Fuel Filter
for Kohler 25 050 22-S, 25 050 03-S ,25 050 08-S Fits 1/4-inch and 5/16-inch ID Fuel Line. for John Deere AM116304 AM1163041 GY20709 for Small Engine GKI VW312 6mm-8mm 1/4 Plastic Inline Gas/Fuel Filter G1000 G4164
Hy-Gard Transmission & Hydraulic Oil
Genuine OEM Part Number: TY22000 An exclusive formulation, specifically designed to protect John Deere transmissions, final drives, and hydraulic systems.
Powtol AM125424 Oil Filter
3" O.D, 2-1/4" long, 3/4"-16 thread, 28 micron filter, 7 to 9 PSI relief, To ensure the optimal performance of your engine, please verify your engine's model and part numbers before ordering the parts.
Tractor Backhoe Attachment with Mechanical Thumb
The MechMaxx BH660 backhoe is a reliable solution for a wide range of digging and excavation tasks. Designed to fit CAT I 3-point hitch tractors, it requires a minimum of 15 PTO horsepower and a tractor weight of at least 1,500 lbs. This backhoe is ideal for ditching on farms and grazing lands, digging pools, cleaning waterways, as well as assistant excavating work in construction and building roads.
* This page contains affiliate links, purchases may generate revenue for this site