Claas Xerion 5000

The Claas Xerion 5000 is a tractor produced by Claas. It is equipped with a 762.8 ci 12.5 L engine. The listed engine power is Diesel (gross): 487 hp / 363.2 kW. Transmission: ZF Eccom 4.5 CVT. Drive type: 4x4 4WD. Operating weight: 29,540 lbs 13399 kg.

Engine Power

Diesel (gross): 487 hp / 363.2 kW

Drive & Traction

4x4 4WD

Fuel & Capacities

264.2 gal 1000.0 L

Transmission

ZF Eccom 4.5 CVT

Operating Weight

29,540 lbs 13399 kg

Overview

	2009 - 2025 Model year 2009-20132014-20192020-2025 Xerion SeriesFour-wheel Drive (4WD) tractor Xerion Series Four-wheel Drive (4WD) tractor

Production
Manufacturer	Claas
Four-wheel Drive (4WD) tractor

Claas Xerion 5000 Engine
Caterpillar 12.5L diesel
Engine details ...

Claas Xerion 5000 Transmission
continuously variable transmission
Transmission details ...

Claas Xerion 5000 Power
Engine (gross)	487 hp 363.2 kW
Engine (max)	524 hp 390.7 kW

Mechanical
Drive	4x4 4WD
Steering	four-wheel steering
Hydraulic wet discs brakes
Cab standard with air-conditioning.

Capacity
Fuel	264.2 gal 1000.0 L
Hydraulic system	31.7 gal 120.0 L

Hydraulics
Capacity	31.7 gal 120.0 L
Pressure	2900 psi 200.0 bar
Rear valves	6
Front valves	2
SCV flow	27.74 gpm 105.0 lpm
Total flow	54.16 gpm 205.0 lpm

Tractor hitch
Rear Type	4N
Control	position and draft control
Rear lift	30,570 lbs 13866 kg
Front Hitch	3N
Front lift	18,800 lbs 8527 kg

Power Take-off (PTO)
Rear PTO Type	1000 (optional)

Dimensions & Tires
Wheelbase	137.8 inches 350 cm
Weight	29,540 lbs 13399 kg
Front tire	800/70
Rear tire	800/70
Full dimensions and tires ...

Engine

Engine Detail — 762.8 ci / 12.5 L Diesel

Manufacturer	Caterpillar C13
Fuel Type	Diesel
Configuration	liquid-cooled
Displacement	762.8 ci 12.5 L
Rated Power (gross)	487 hp 363.2 kW
Maximum Power (gross)	524 hp 390.7 kW
Rated RPM	2000
Idle RPM	800-2080
Torque	1735 lb-ft 2352.7 Nm
Torque RPM	1400
Starter volts	24

Transmission

Transmission — ZF Eccom 4.5 CVT

Transmission	ZF Eccom 4.5 CVT
Type	continuously variable transmission
Gears	infinite forward and reverse

Dimensions

Claas Xerion 5000 Tires
Ag front	800/70 R38
	710/75 R42
	900/60 R42
Ag rear	800/70 R38
	710/75 R42
	900/60 R42

Dimensions
Wheelbase	137.8 inches 350 cm
Length	295 inches 749 cm
Min Width	98 inches 248 cm
Max Width	129.9 inches 329 cm
Max Height	143.7 inches 364 cm
Max Height	149.6 inches 379 cm
Shipping weight	29,540 lbs 13399 kg
Min Ground clearance	14.8 inches 37 cm
Max Ground clearance	20.7 inches 52 cm

Recommended Implements & Sizing Guide

Engineering recommendations for Claas Xerion 5000 based on its 487 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	8+ Bottom On-Land Hitch8+ 铧重型机外牵引犁	Commercial / Field Scale	High horsepower articulated/4WD field plowing.
Rotary Cutter / MowerMowing & Clearing	15 to 20 ft Batwing4.6 - 6.1 m 宽幅折叠翼	Commercial / Field Scale	Large commercial field and roadside mowing operations.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	24 to 36 ft Heavy Duty Field Disc7.3 - 11.0 m 超宽重型整地耙	Commercial / Field Scale	Broad-acre grain tillage for high-drawbar tractors.
Hay BalerHay & Forage	Large Square Baler (3x4 or 4x4)大方捆商用打捆机 (1.2x1.2 m)	Commercial / Field Scale	High-capacity commercial forage harvesting (1000 RPM PTO).

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Claas Xerion 5000.

Estimated Continuous Field Runtime: 10.4 hrs

Approximately 10.4 hours of continuous field operation at ~75% rated power on a full tank (264.2 gal / 1000.1 L).

Estimated 75% Load Fuel Burn~25.3 gal/hr (95.9 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours