Craftsman 917.25051

The Craftsman 917.25051 is a tractor produced by Craftsman Lawn Tractors. It is equipped with a 770 cc 46.98 ci engine. The listed engine power is Gasoline (listed): 19.5 hp / 14.5 kW. Transmission: 6 forward and 2 reverse.

Engine Power

Gasoline (listed): 19.5 hp / 14.5 kW

Fuel & Capacities

3.5 gal 13.2 L

Transmission

6 forward and 2 reverse

Overview

	1995 GT6000 SeriesGarden tractorAYP built GT6000 Series Garden tractor AYP built

Production
Distributor	Craftsman (a part of Sears)
Manufacturer	AYP
Garden tractor
Original price was $2,699 in 1995

Variants
25051	gear
25052	hydrostatic

Craftsman 917.25051 Engine
19.5HP Kohler 770cc 2-cyl gasoline
Fuel tank	3.5 gal 13.2 L
Engine details ...

Craftsman 917.25051 Transmission
6-speed gear
Transmission details ...

Mechanical
Two-wheel drive
Manual steering
Open operator station.

Power Take-off (PTO)
Mid PTO	independent
Clutch	electric

Dimensions & Tires
Front tire	16x6.5-8
Rear tire	23x10.5-12
Full dimensions and tires ...

Electrical
Ground	negative
Battery volts	12

Engine

Engine Detail — 770 cc / 46.98 ci Gasoline

Manufacturer	Kohler MV20S
Fuel Type	Gasoline
Configuration	2-cylinder, air-cooled vertical-shaft opposed-twin
Displacement	770 cc 46.98 ci
Bore/Stroke	3.125x3.063 inches 79 x 78 mm
Power	19.5 hp 14.5 kW
Starter	electric
Starter volts	12
Oil capacity	2 qts 1.9 L

Transmission

Transmission — 6 forward and 2 reverse belt-driven gear

Type	belt-driven gear
Gears	6 forward and 2 reverse
Oil capacity	4 qts 3.8 L

Dimensions

Craftsman 917.25051 Tires
Lawn/turf front	16x6.5-8
Lawn/turf rear	23x10.5-12

Dimensions

Attachments

46" Mower deck
Type	mid-mount Craftsman
	3-blade
Cutting width	46 inches 116 cm

Photos

Craftsman 917.25051

Recommended Implements & Sizing Guide

Engineering recommendations for Craftsman Lawn Tractors Craftsman 917.25051 based on its 19.5 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	1 to 2 Bottom (12")1 - 2 铧 (30 cm)	Light Duty	Ideal for garden plots and light sandy soil.
Rotary Cutter / MowerMowing & Clearing	4 ft (48 in)1.2 m	Light Duty	Pasture clipping and light brush under 1" diameter.
Rotary TillerSeedbed Prep	42 to 48 in105 - 120 cm	Light Duty	Covers compact tractor tire width.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Craftsman Lawn Tractors Craftsman 917.25051.

Estimated Continuous Field Runtime: 3.5 hrs

Approximately 3.5 hours of continuous field operation at ~75% rated power on a full tank (3.5 gal / 13.2 L).

Estimated 75% Load Fuel Burn~1 gal/hr (3.8 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours

Craftsman Lawn Tractors Craftsman 917.25051 Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for Craftsman Lawn Tractors Craftsman 917.25051.

Enter value:

Unit:

Converted Equivalents:

Horsepower (HP)19.5 hp

Kilowatts (kW)14.5 kW

Metric Horsepower (PS / CV)19.8 PS

Direct Competitor Comparison

Compare Craftsman 917.25051 against same-era industry alternatives in the same horsepower class.

Current Model

Craftsman Lawn Tractors