Craftsman 917.25598

The Craftsman 917.25598 is a tractor produced by Craftsman Lawn Tractors. It is equipped with a 691 cc 42.18 ci engine. The listed engine power is Gasoline (listed): 18 hp / 13.4 kW. Transmission: 6 forward and 1 reverse. Operating weight: 743 lbs 337 kg.

Engine Power

Gasoline (listed): 18 hp / 13.4 kW

Fuel & Capacities

3.5 gal 13.2 L

Transmission

6 forward and 1 reverse

Operating Weight

743 lbs 337 kg

Overview

	1993 GT6000 SeriesGarden tractorAYP built GT6000 Series Garden tractor AYP built

Production
Distributor	Craftsman (a part of Sears)
Manufacturer	AYP
Garden tractor
Original price was $2,599 in 1993

Craftsman 917.25598 Engine
18HP Kohler 691cc 2-cyl gasoline
Fuel tank	3.5 gal 13.2 L
Engine details ...

Craftsman 917.25598 Transmission
6-speed gear
Transmission details ...

Mechanical
Two-wheel drive
Manual steering
Open operator station.

Power Take-off (PTO)
Mid PTO	independent
Clutch	electric

Dimensions & Tires
Weight	743 lbs 337 kg
Front tire	16x6.5-8
Rear tire	23x10.5-12
Full dimensions and tires ...

Electrical
Ground	negative
Charging amps	3 (battery)
	15 (headlights)
Battery volts	12

References

Lawn & Garden Catalog published in 1993, by Sears
1993 Spring/Summer Annual published by Sears

Engine

Engine Detail — 691 cc / 42.18 ci Gasoline

Manufacturer	Kohler MV18S
Fuel Type	Gasoline
Configuration	2-cylinder, air-cooled vertical-shaft
Displacement	691 cc 42.18 ci
Bore/Stroke	3.12x2.75 inches 79 x 70 mm
Power	18 hp 13.4 kW
Starter	electric
Starter volts	12
Sparkplug	Champion RV15YC
Sparkplug gap	0.025 inches 0.635 mm
Oil capacity	2 qts 1.9 L
Oil change	25 h

Craftsman 917.25598 Engine

Transmission

Transmission — 6 forward and 1 reverse belt-driven gear

Type	belt-driven gear
Gears	6 forward and 1 reverse
Oil capacity	4 qts 3.8 L
Three gears, plus reverse, in two ranges.

Dimensions

Craftsman 917.25598 Tires
Lawn/turf front	16x6.5-8
Lawn/turf rear	23x10.5-12

Dimensions
Weight	743 lbs 337 kg

Attachments

Attachment overview
44" mid-mount mower deck
Blade
Garden tractors are capable of using tillers, plows, or other ground-engaging attachments. TractorData does not list details of these attachments.

44" Mower deck
Type	mid-mount Craftsman
	3-blade with manual lift
Cutting width	44 inches 111 cm

Photos

Craftsman 917.25598

Recommended Implements & Sizing Guide

Engineering recommendations for Craftsman Lawn Tractors Craftsman 917.25598 based on its 18 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	1 to 2 Bottom (12")1 - 2 铧 (30 cm)	Light Duty	Ideal for garden plots and light sandy soil.
Rotary Cutter / MowerMowing & Clearing	4 ft (48 in)1.2 m	Light Duty	Pasture clipping and light brush under 1" diameter.
Rotary TillerSeedbed Prep	42 to 48 in105 - 120 cm	Light Duty	Covers compact tractor tire width.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Craftsman Lawn Tractors Craftsman 917.25598.

Estimated Continuous Field Runtime: 3.7 hrs

Approximately 3.7 hours of continuous field operation at ~75% rated power on a full tank (3.5 gal / 13.2 L).

Estimated 75% Load Fuel Burn~0.9 gal/hr (3.5 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours

Craftsman Lawn Tractors Craftsman 917.25598 Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for Craftsman Lawn Tractors Craftsman 917.25598.

Enter value:

Unit:

Converted Equivalents:

Horsepower (HP)18 hp

Kilowatts (kW)13.4 kW

Metric Horsepower (PS / CV)18.2 PS

Direct Competitor Comparison

Compare Craftsman 917.25598 against same-era industry alternatives in the same horsepower class.

Current Model

Craftsman Lawn Tractors