Deutz-Allis 9150
The Deutz-Allis 9150 is a tractor produced by Deutz Allis. It is equipped with a 374 ci 6.1 L engine. The listed engine power is 151.07 hp 112.7 kW. Transmission: 18 forward and 6 reverse. Operating weight: 13520 to 15915 pounds.
Overview
![]() | 1989 - 1990
9100 SeriesRow-Crop tractorWhite built
9100 Series
Row-Crop tractor
White built |
|---|
Production | |
|---|---|
Distributor | Deutz-Allis |
Manufacturer | White |
Row-Crop tractor | |
Built in Coldwater, Ohio, USA | |
Deutz-Allis 9150 Engine | |
|---|---|
Deutz 6.1L 6-cyl diesel | |
Fuel tank | 90 gal
340.7 L |
Engine details ... | |
Deutz-Allis 9150 Transmission | |
|---|---|
18-speed partial power shift | |
Transmission details ... |
Deutz-Allis 9150 Power | |
|---|---|
PTO (claimed) | 150 hp
111.9 kW |
Drawbar (tested) | 132.71 hp
99.0 kW |
PTO (tested) | 151.07 hp
112.7 kW |
Performance test details ... | |
Mechanical | |
|---|---|
Two- or four-wheel drive | |
Differential lock | front and rear |
Power steering | |
Differential hydraulic wet disc brakes | |
Hydraulics | |
|---|---|
Type | closed center |
Pressure | 2275 psi
156.9 bar |
Valves | 2 or3 |
Pump flow | 24 gpm
90.8 lpm |
Tractor hitch | |
|---|---|
Rear Type | III/II |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 540/1000 (1.375) |
Engine RPM | 1000@2400 |
Dimensions & Tires | |
|---|---|
2WD Wheelbase | 120 inches
304 cm |
4WD Wheelbase | 115 inches
292 cm |
Weight | 13520 to 15915 pounds |
Front tire | 11.00-16 |
2WD Rear tire | 18.4R38 |
Full dimensions and tires ... | |
Electrical | |
|---|---|
Ground | negative |
Battery volts | 12 |
References | |
|---|---|
![]() | |
9150/9170/9190 published in 1988, by Deutz-Allis |
Engine
Engine Detail — 374 ci / 6.1 L Diesel
Manufacturer | Deutz BF6L913C |
Configuration | turbocharged diesel, 6-cylinder, air-cooled |
Displacement | 374 ci
6.1 L |
Bore/Stroke | 4.016x4.921 inches
102 x 125 mm |
Air cleaner | dual paper elements |
Compression | 15.1:1 |
Rated RPM | 2400 |
Starter volts | 12 |
Oil capacity | 16.9 qts
16.0 L |
Transmission
Transmission — 18 forward and 6 reverse partial power shift
Type | partial power shift |
Gears | 18 forward and 6 reverse |
Clutch | 355mm disc |
Six speeds with three-speed power shift. | |
With 18.4R38 rear tires. | |
![]() | |
Dimensions
Deutz-Allis 9150 Tires | |
|---|---|
2WD Standard tires (ag) | Front: 11.00-16. Rear: 18.4R38 |
4WD Standard tires (ag) | Front: 14.9R28. Rear: 18.4R38 |
Dimensions | |
|---|---|
2WD Wheelbase | 120 inches
304 cm |
4WD Wheelbase | 115 inches
292 cm |
Width | 96 inches
243 cm |
Height | 122 inches
309 cm |
Deutz-Allis 9150 Weight | |
|---|---|
2WD Shipping | 13520 lbs
6132 kg |
4WD Shipping | 14880 lbs
6749 kg |
Operating | 15,915 lbs (duals)
7219 kg |
Ballasted | 18,625 lbs
8448 kg |
Tests
Nebraska Tractor Test 1633 | |
|---|---|
Diesel 18-speed 2WD
November 2 - 14, 1989
Link: Nebraska Tractor Test 1633 file | |
PTO performance | |
Power at rated engine speed | 151.07 hp
112.7 kW |
Fuel use | 9.3 gal/hour
35.2 l/hour |
Power at rated PTO speed | 150.22 hp
112.0 kW |
Fuel use | 9.1 gal/hour
34.4 l/hour |
Drawbar performance | |
Max power | 132.71 hp
99.0 kW |
Fuel use | 9.1 gal/hour
34.4 l/hour |
Gear 3D used for power test. | |
Max pull | 119.68 lbs
54 kg |
Gear 1O used for pull test. | |
Photos
Recommended Implements & Sizing Guide
Engineering recommendations for Deutz Allis Deutz-Allis 9150 based on its 151.07 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 5 to 7 Bottom (18")5 - 7 铧 (45 cm) | Commercial / Field Scale | Large acreage tillage; requires front ballast weights. |
Rotary Cutter / MowerMowing & Clearing | 15 to 20 ft Batwing4.6 - 6.1 m 宽幅折叠翼 | Commercial / Field Scale | Large commercial field and roadside mowing operations. |
Rotary TillerSeedbed Prep | 90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机 | Commercial / Field Scale | Deep intensive seedbed preparation for commercial row crops. |
Disc HarrowSecondary Tillage | 15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙 | Commercial / Field Scale | Wide commercial field leveling; requires hydraulic remotes. |
Hay BalerHay & Forage | Large Square Baler (3x4 or 4x4)大方捆商用打捆机 (1.2x1.2 m) | Commercial / Field Scale | High-capacity commercial forage harvesting (1000 RPM PTO). |
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Deutz Allis Deutz-Allis 9150.
Estimated Continuous Field Runtime: 11.5 hrs
Approximately 11.5 hours of continuous field operation at ~75% rated power on a full tank (90 gal / 340.7 L).
Engine Crankcase Oil
Transmission & Hydraulic System
Engine Cooling System
Deutz Allis Deutz-Allis 9150 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Deutz Allis Deutz-Allis 9150.
Converted Equivalents:
Direct Competitor Comparison
Compare Deutz-Allis 9150 against same-era industry alternatives in the same horsepower class.
Deutz-Allis 9150
Related models
Deutz-Allis 7110
- Power:
- 122.2
- Production years:
- 1986 - 1990
Deutz-Allis 7120
- Power:
- 135.6
- Production years:
- 1986 - 1990
Deutz-Allis 8030
- Power:
- 148.6
- Production years:
- 1985 - 1988
Deutz-Allis 9130
- Power:
- 150
- Production years:
- 1989 - 1990
Deutz-Allis 7145
- Power:
- 160
- Production years:
- 1987 - 1988



