Deutz-Allis 8030

The Deutz-Allis 8030 is a tractor produced by Deutz Allis. It is equipped with a 426 ci 7.0 L engine. The rated power output is 133.75 hp 99.7 kW. Transmission: Power Shift. Operating weight: 14200 to 15015 pounds.

Overview

	1985 - 1988 Row-Crop tractor
1985 - 1988
Row-Crop tractor

Series map: 801080308050119.3hp*148.6hp*169.3hp*8030↓ 1982-1985*Estimated engine power for comparison only.

Note: the Deutz-Allis model 8030 is the same as the Allis Chalmers 8030. The following data is from the 8030 listing.

Production
Manufacturer	Deutz-Allis
Row-Crop tractor
Built in West Allis, Wisconsin, USA
Total built	2,328
Original price	$52,398

Deutz-Allis 8030 Engine
Allis Chalmers 7.0L 6-cyl diesel
Engine details ...

Deutz-Allis 8030 Power
Drawbar (tested)	115.22 hp 85.9 kW
PTO (tested)	133.75 hp 99.7 kW
Performance test details ...

Mechanical
Two- or four-wheel drive
Differential lock	electro-hydraulic rear
Steering	hydrostatic power
Differential hydraulic wet discs brakes
Acousta cab standard with heat and air-conditioning. Optional radio and cassette tape player.

Capacity
Fuel	60 gal 227.1 L
	25 gal (optional tank) 94.6 L
Rear diff.	66.8 qts 63.2 L

Hydraulics
Type	closed-center load-sensitive
Valves	2 or 3
Pump flow	22 gpm 83.3 lpm
	13.5 gpm (transmission) 51.1 lpm
Total flow	45 gpm 170.3 lpm
Steering flow	9.5 gpm 36.0 lpm

Tractor hitch
Rear Type	III/II
Rear lift (at 24"/610mm)	6,680 lbs 3030 kg
	8,200 lbs (optional) 3719 kg

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540/1000

Dimensions & Tires
Wheelbase	106 inches (2WD) 269 cm
	96 inches (4WD) 243 cm
Weight	14200 to 15015 pounds
Front tire	10.00-16
Rear tire	18.4-38
Full dimensions and tires ...

Electrical
Charging system	alternator
Charging amps	100
Battery volts	12

Engine

Series map: 801080308050119.3hp*148.6hp*169.3hp*8030↓ 1982-1985*Estimated engine power for comparison only.

Note: the Deutz-Allis model 8030 is the same as the Allis Chalmers 8030. The following data is from the 8030 listing.

Engine Detail — 426 ci / 7.0 L Diesel

Manufacturer	Allis Chalmers 670T
Configuration	turbocharged diesel, 6-cylinder, liquid-cooled inline
Displacement	426 ci 7.0 L
Bore/Stroke	4.25x5.00 inches 108 x 127 mm
Air cleaner	dry
Compression	15.5:1
Rated RPM	2300
Starter volts	12
Oil capacity	19 qts 18.0 L
Coolant capacity	31 qts 29.3 L

Transmission

Series map: 801080308050119.3hp*148.6hp*169.3hp*8030↓ 1982-1985*Estimated engine power for comparison only.

Note: the Deutz-Allis model 8030 is the same as the Allis Chalmers 8030. The following data is from the 8030 listing.

Transmission options
16-speed partial power shift
20-speed partial power shift
12-speed Allis-Chalmers

Transmission — Allis-Chalmers Power Director

Transmission	Allis-Chalmers Power Director
Type	partial power shift
Gears	16 forward and 4 reverse
Oil capacity	29.6 qts 28.0 L
Four gears (1-4) in two ranges (slow/fast) with a two-speed power shift (low/high) controlled by left-hand lever.
With 18.4x38 rear tires.

Transmission — Allis-Chalmers Power Director

Transmission	Allis-Chalmers Power Director
Type	partial power shift
Gears	20 forward and 4 reverse
Oil capacity	29.6 qts 28.0 L
Five gears (1-5) in two ranges (slow/fast) with a two-speed power shift (low/high) controlled by left-hand lever.
With 18.4x38 rear tires.

Transmission — Power Shift

Transmission	Power Shift
Type	Allis-Chalmers
Gears	12 forward and 2 reverse
Oil capacity	29.6 qts 28.0 L
Six power shift gears (1-6) in two ranges (slow/fast). Clutch must be used to shift range. Pressing the clutch pedal half-way automatically downshifts from 5th/6th to 4th gear.
With 18.4x38 rear tires.

Dimensions

Series map: 801080308050119.3hp*148.6hp*169.3hp*8030↓ 1982-1985*Estimated engine power for comparison only.

Note: the Deutz-Allis model 8030 is the same as the Allis Chalmers 8030. The following data is from the 8030 listing.

Deutz-Allis 8030 Tires
Ag front	10.00-16 (2WD)
	13.6-28 (4WD)
Ag rear	18.4-38
Ag front	11.00-16 (2WD)
	14L-16 (2WD)
	18.4-16 (2WD)
	14.9-28 (4WD)
	14.9-24 (4WD)
Ag rear	20.8-38
	18.4-42
	16.9-38

Dimensions
Wheelbase	106 inches (2WD) 269 cm
	96 inches (4WD) 243 cm
Length	187 inches 474 cm
Width	93.4 inches 237 cm
Ground clearance	17.5 inches (4WD front axle) 44 cm
	21 inches ( 2WD front axle) 53 cm
	28 inches (rear axle) 71 cm

Deutz-Allis 8030 Weight
Shipping	14,200 lbs (4WD) 6441 kg
Operating	15,015 lbs (2WD duals) 6810 kg
Ballasted	17,100 lbs 7756 kg

Deutz-Allis 8030 Height
Hood	69 inches 175 cm
Cab	115 inches 292 cm
Exhaust	113 inches 287 cm

Tests

Series map: 801080308050119.3hp*148.6hp*169.3hp*8030↓ 1982-1985*Estimated engine power for comparison only.

Note: the Deutz-Allis model 8030 is the same as the Allis Chalmers 8030. The following data is from the 8030 listing.

Nebraska Tractor Test 1447
Diesel 12-speed 2WD August 31 - September 13, 1982 Link: Nebraska Tractor Test 1447 file
PTO performance
Power at rated engine speed	133.75 hp 99.7 kW
Fuel use	8.9 gal/hour 33.7 l/hour
Power at rated PTO speed	134.42 hp 100.2 kW
Fuel use	8.8 gal/hour 33.3 l/hour
Drawbar performance
Max power	115.22 hp 85.9 kW
Fuel use	8.9 gal/hour 33.7 l/hour
Gear 2F used for power test.
Max pull	13,348 lbs 6054 kg
Gear 3S used for pull test.

Photos

Deutz-Allis 8030 tractor photo