Deutz-Fahr AgroXtra 4.07

The Deutz-Fahr AgroXtra 4.07 is a tractor produced by Deutz Fahr. It is equipped with a 230.05 ci 3.8 L engine. The listed engine power is Diesel (listed): 65 hp / 48.5 kW. Transmission: 16 forward and 8 reverse. Operating weight: 7441 lbs 3375 kg.

Engine Power

Diesel (listed): 65 hp / 48.5 kW

Fuel & Capacities

21.9 gal 82.9 L

Transmission

16 forward and 8 reverse

Operating Weight

7441 lbs 3375 kg

Overview

	1991 - 1995

Production
Manufacturer	Deutz-Fahr

Deutz-Fahr 4.07 Engine
Deutz 3.8L 4-cyl diesel
Fuel tank	21.9 gal 82.9 L
Engine details ...

Deutz-Fahr 4.07 Transmission
16-speed
Transmission details ...

Deutz-Fahr 4.07 Power
Engine	65 hp 48.5 kW

Mechanical
Four-wheel drive

Hydraulics
Pump flow	10.6 gpm 40.1 lpm

Tractor hitch
Rear lift	7276 lbs 3300 kg

Power Take-off (PTO)
Rear PTO Type	540, 750

Dimensions & Tires
Wheelbase	88.58 inches 224 cm
Weight	7441 lbs 3375 kg
Front tire	375/75R20
Rear tire	16.9R30
Full dimensions and tires ...

Engine

Engine Detail — 230.05 ci / 3.8 L Diesel

Manufacturer	Deutz
Fuel Type	Diesel
Configuration	4-cylinder
Displacement	230.05 ci 3.8 L
Bore/Stroke	3.94x4.72 inches 100 x 120 mm
Power	65 hp 48.5 kW
Rated RPM	2350

Transmission

Transmission — 16 forward and 8 reverse

Gears

16 forward and 8 reverse

Dimensions

Deutz-Fahr 4.07 Tires
Ag front	375/75R20
Ag rear	16.9R30

Dimensions
Wheelbase	88.58 inches 224 cm
Length	149.61 inches 380 cm
Height	96.85 inches 245 cm
Weight	7441 lbs 3375 kg

Photos

Deutz-Fahr AgroXtra 4.07 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Deutz Fahr Deutz-Fahr AgroXtra 4.07 based on its 65 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	3 to 4 Bottom (16")3 - 4 铧 (40 cm)	Heavy Duty	Suitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing	7 to 8 ft (84-96 in)2.1 - 2.4 m	Heavy Duty	Heavy-duty twin spindle cutter for overgrown acreage.
Rotary TillerSeedbed Prep	78 to 84 in200 - 215 cm	Heavy Duty	Heavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage	7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙	Medium Duty	Field leveling and clod breaking behind plows.
Hay BalerHay & Forage	4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机	Heavy Duty	Silage and dry hay; 540 RPM PTO with slip-clutch.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Deutz Fahr Deutz-Fahr AgroXtra 4.07.

Estimated Continuous Field Runtime: 6.5 hrs

Approximately 6.5 hours of continuous field operation at ~75% rated power on a full tank (21.9 gal / 82.9 L).

Estimated 75% Load Fuel Burn~3.4 gal/hr (12.8 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours

Deutz Fahr Deutz-Fahr AgroXtra 4.07 Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for Deutz Fahr Deutz-Fahr AgroXtra 4.07.

Enter value:

Unit:

Converted Equivalents:

Horsepower (HP)65 hp

Kilowatts (kW)48.5 kW

Metric Horsepower (PS / CV)65.9 PS

Direct Competitor Comparison

Compare Deutz-Fahr AgroXtra 4.07 against same-era industry alternatives in the same horsepower class.

Current Model

Deutz Fahr