Deutz-Fahr Intrac 2003

The Deutz-Fahr Intrac 2003 is a tractor produced by Deutz Fahr. It is equipped with a 229.92 ci 3.8 L engine. The listed engine power is Diesel (listed): 59 hp / 44.0 kW. Transmission: 12 forward and 4 reverse. Operating weight: 6240 to 7606 pounds.

Engine Power

Diesel (listed): 59 hp / 44.0 kW

Fuel & Capacities

23 gal 87.1 L

Transmission

12 forward and 4 reverse

Operating Weight

6240 to 7606 pounds

Overview

	1974 - 1979 Intrac 2000 SeriesTool Carrier tractor Intrac 2000 Series Tool Carrier tractor

Production
Manufacturer	Deutz-Fahr
Tool Carrier tractor

Deutz-Fahr Intrac 2003 Engine
Deutz 3.8L 4-cyl diesel
Fuel tank	23 gal 87.1 L
Engine details ...

Deutz-Fahr Intrac 2003 Power
Engine	59 hp 44.0 kW

Mechanical
Two- or four-wheel drive
2WD Steering	manual
4WD Steering	power
Cab standard.

Hydraulics
Pump flow	10.5 gpm 39.7 lpm

Tractor hitch
Rear Type	II/I
Rear lift	5291 lbs 2399 kg
Front Hitch	I
Front lift	2205 lbs 1000 kg

Power Take-off (PTO)
Rear PTO Type	540/1000 (1.375)
Engine RPM	540@1890
	1000@1875
Front PTO Type	1000 (1.375)
Engine RPM	1000@1875

Dimensions & Tires
4WD Wheelbase	86.6 inches 219 cm
Weight	6240 to 7606 pounds
Front tire	7.50-18
4WD Rear tire	12.4-32
Full dimensions and tires ...

References

Intrac 2003 published in 1978, by Deutz-Fahr

Engine

Engine Detail — 229.92 ci / 3.8 L Diesel

Manufacturer	Deutz F4L912
Fuel Type	Diesel
Configuration	4-cylinder, air-cooled
Displacement	229.92 ci 3.8 L
Bore/Stroke	3.94x4.72 inches 100 x 120 mm
Power	59 hp 44.0 kW
Rated RPM	2050

Transmission

Transmission options
8-speed
8-speed synchronized
12-speed creeper

Transmission — 8 forward and 2 reverse

Gears

8 forward and 2 reverse

Transmission — 8 forward and 4 reverse synchronized

Type	synchronized
Gears	8 forward and 4 reverse
Four gears in two ranges, plus reverse range. Optional high-speed road gear.

Transmission
Type	creeper
Gears	12 forward and 4 reverse

Dimensions

Deutz-Fahr Intrac 2003 Tires
4WD Standard tires (ag)	Front: 7.50-18. Rear: 12.4-32

Dimensions
4WD Wheelbase	86.6 inches 219 cm
Length	168.9 inches 429 cm
Width	74.4 inches 188 cm
Height (cab)	98.4 inches 249 cm
2WD Weight	6240 lbs 2830 kg
4WD Weight	7606 lbs 3450 kg
Ground clearance	12 inches 30 cm
Front tread	60.6 inches 153 cm
Rear tread	59.8 to 71.7 inches 151 to 182 cm

Photos

Deutz-Fahr Intrac 2003 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Deutz Fahr Deutz-Fahr Intrac 2003 based on its 59 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	3 to 4 Bottom (16")3 - 4 铧 (40 cm)	Heavy Duty	Suitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing	6 ft (72 in)1.8 m	Medium Duty	Medium pasture clearing; rear slip-clutch recommended.
Rotary TillerSeedbed Prep	66 to 72 in165 - 180 cm	Medium Duty	Standard utility tiller; slip clutch protection required.
Disc HarrowSecondary Tillage	7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙	Medium Duty	Field leveling and clod breaking behind plows.
Hay BalerHay & Forage	Small Square Baler (14x18")小方捆打捆机 (36x46 cm)	Medium Duty	Classic 2-string baler for horse and small livestock hay.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Deutz Fahr Deutz-Fahr Intrac 2003.

Estimated Continuous Field Runtime: 7.5 hrs

Approximately 7.5 hours of continuous field operation at ~75% rated power on a full tank (23 gal / 87.1 L).

Estimated 75% Load Fuel Burn~3.1 gal/hr (11.6 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours

Deutz Fahr Deutz-Fahr Intrac 2003 Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for Deutz Fahr Deutz-Fahr Intrac 2003.

Enter value:

Unit:

Converted Equivalents:

Horsepower (HP)59 hp

Kilowatts (kW)44 kW

Metric Horsepower (PS / CV)59.8 PS

Direct Competitor Comparison

Compare Deutz-Fahr Intrac 2003 against same-era industry alternatives in the same horsepower class.

Current Model

Deutz Fahr