Deutz-Fahr Argotron L 720

The Deutz-Fahr Argotron L 720 is a tractor produced by Deutz Fahr. It is equipped with a 436.1 ci 7.1 L engine. The listed engine power is Diesel (gross): 210.5 hp / 157.0 kW. Transmission: 27 forward and reverse. Operating weight: 16579 lbs 7520 kg.

Engine Power

Diesel (gross): 210.5 hp / 157.0 kW

Fuel & Capacities

100.4 gal 380.0 L

Transmission

27 forward and reverse

Operating Weight

16579 lbs 7520 kg

Overview

	2008 - 2010 Agrotron L SeriesRow-Crop tractor Agrotron L Series Row-Crop tractor

Production
Manufacturer	Deutz-Fahr (a part of SAME)
Row-Crop tractor

Deutz-Fahr Argotron L 720 Engine
Deutz 7.1L 6-cyl diesel
Fuel tank	100.4 gal 380.0 L
Engine details ...

Deutz-Fahr Argotron L 720 Transmission
27-speed power shift
Transmission details ...

Deutz-Fahr Argotron L 720 Power
Engine (gross)	210.5 hp 157.0 kW
Engine (max)	217.3 hp 162.0 kW

Mechanical
Four-wheel drive
Power steering
Cab standard with air-conditioning.

Hydraulics
Type	load sensing
Pump flow	29.9 gpm 113.2 lpm

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540/1000 (1.375)
Front PTO	independent OptOptional
Front PTO Type	1000

Dimensions & Tires
Wheelbase	117.5 inches 298 cm
Weight	16579 lbs 7520 kg
Front tire	540/65R34
Rear tire	650/65R42
Full dimensions and tires ...

Electrical
Ground	negative
Battery volts	12

References

Agrotron L 210 published in 2007, by Deutz-Fahr

Engine

Engine Detail — 436.1 ci / 7.1 L Diesel

Manufacturer	Deutz TCD2013L06
Configuration	turbocharged intercooled diesel, 6-cylinder, liquid-cooled
Displacement	436.1 ci 7.1 L
Bore/Stroke	4.25x5.12 inches 108 x 130 mm
Rated Power (gross)	210.5 hp 157.0 kW
Maximum Power (gross)	217.3 hp 162.0 kW
Rated RPM	2350
Torque	616.6 lb-ft 836.1 Nm
Torque RPM	1400
Starter	electric
Starter volts	12

Transmission

Transmission — 27 forward and reverse power shift

Type	power shift
Gears	27 forward and reverse
Nine power shift gears in three ranges.

Dimensions

Deutz-Fahr Argotron L 720 Tires
Standard tires (ag)	Front: 540/65R34. Rear: 650/65R42

Dimensions
Wheelbase	117.5 inches 298 cm
Length	189 inches 480 cm
Width	100.4 inches*Minimum width 255 cm
Height (cab)	118.9 inches 302 cm
Weight	16579 lbs 7520 kg
Ground clearance	24.4 inches 61 cm
Front tread	72.8 to 85.6 inches 184 to 217 cm
Rear tread	74.8 to 81.1 inches 189 to 205 cm

Photos

Deutz-Fahr Argotron L 720 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Deutz Fahr Deutz-Fahr Argotron L 720 based on its 210.5 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	5 to 7 Bottom (18")5 - 7 铧 (45 cm)	Commercial / Field Scale	Large acreage tillage; requires front ballast weights.
Rotary Cutter / MowerMowing & Clearing	15 to 20 ft Batwing4.6 - 6.1 m 宽幅折叠翼	Commercial / Field Scale	Large commercial field and roadside mowing operations.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙	Commercial / Field Scale	Wide commercial field leveling; requires hydraulic remotes.
Hay BalerHay & Forage	Large Square Baler (3x4 or 4x4)大方捆商用打捆机 (1.2x1.2 m)	Commercial / Field Scale	High-capacity commercial forage harvesting (1000 RPM PTO).

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Deutz Fahr Deutz-Fahr Argotron L 720.

Estimated Continuous Field Runtime: 9.2 hrs

Approximately 9.2 hours of continuous field operation at ~75% rated power on a full tank (100.4 gal / 380.1 L).

Estimated 75% Load Fuel Burn~10.9 gal/hr (41.4 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours

Deutz Fahr Deutz-Fahr Argotron L 720 Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for Deutz Fahr Deutz-Fahr Argotron L 720.

Enter value:

Unit:

Converted Equivalents:

Horsepower (HP)210.5 hp

Kilowatts (kW)157 kW

Metric Horsepower (PS / CV)213.4 PS

Direct Competitor Comparison

Compare Deutz-Fahr Argotron L 720 against same-era industry alternatives in the same horsepower class.

Current Model

Deutz Fahr