Deutz-Fahr D 5207
The Deutz-Fahr D 5207 is a tractor produced by Deutz Fahr. It is equipped with a 172.50 ci 2.8 L engine. The listed engine power is Diesel (listed): 51 hp / 38.0 kW. Transmission: TW50.31. Operating weight: 5952 to 6592 pounds.
Engine Power
Diesel (listed): 51 hp / 38.0 kW
Fuel & Capacities
18.5 gal
70.0 L
Transmission
TW50.31
Operating Weight
5952 to 6592 pounds
Overview
 | 1980 - 1984
07 SeriesUtility tractor
07 Series
Utility tractor |
|---|
Production | |
|---|---|
Manufacturer | Deutz-Fahr |
Utility tractor | |
Deutz-Fahr D 5207 Engine | |
|---|---|
Deutz 2.8L 3-cyl diesel | |
Fuel tank | 18.5 gal
70.0 L |
Engine details ...  | |
Deutz-Fahr D 5207 Transmission | |
|---|---|
8-speed synchronized | |
Transmission details ...  |
Deutz-Fahr D 5207 Power | |
|---|---|
Engine | 51 hp
38.0 kW |
Mechanical | |
|---|---|
Two- or four-wheel drive | |
Power steering | |
Mechanical disc brakes | |
Four-post ROPS. Cab available with heat. |
Hydraulics | |
|---|---|
Type | open center |
Pressure | 2538 psi
175.0 bar |
Pump flow | 9.2 gpm
34.8 lpm |
Tractor hitch | |
|---|---|
Rear Type | II/I |
Control | position and draft control |
Rear lift | 5300 lbs
2404 kg |
Front Hitch | I |
Front lift | 3372 lbs
1529 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 540/1000 |
Front PTO | independent |
Front PTO Type | 1000 |
Dimensions & Tires | |
|---|---|
2WD Wheelbase | 79.1 inches
200 cm |
4WD Wheelbase | 81.1 inches
205 cm |
Weight | 5952 to 6592 pounds |
Front tire | 7.50-16 |
2WD Rear tire | 14.9-28 |
Full dimensions and tires ...  | |
References | |
|---|---|
 | |
D5207C - D6507C - D7807C published by Deutz-Fahr |
Engine
Engine Detail — 172.50 ci / 2.8 L Diesel
Manufacturer | Deutz F3L 912 |
Fuel Type | Diesel |
Configuration | 3-cylinder, air-cooled |
Displacement | 172.50 ci
2.8 L |
Bore/Stroke | 3.94x4.72 inches
100 x 120 mm |
Power | 51 hp
38.0 kW |
Rated RPM | 2300 |
Starter | electric |
Starter volts | 12 |
Transmission
Transmission — TW50.31
Transmission | TW50.31 |
Type | synchronized |
Gears | 8 forward and 4 reverse |
With 14.9-28 rear tires. | |
 | |
Dimensions
Deutz-Fahr D 5207 Tires | |
|---|---|
2WD Standard tires (ag) | Front: 7.50-16. Rear: 14.9-28 |
4WD Standard tires (ag) | Front: 10.5-18. Rear: 14.9-28 |
Dimensions | |
|---|---|
2WD Wheelbase | 79.1 inches
200 cm |
4WD Wheelbase | 81.1 inches
205 cm |
2WD Length | 137.4 inches
348 cm |
4WD Length | 140.6 inches
357 cm |
Width | 82.3 inches
209 cm |
Height | 95.7 inches
243 cm |
2WD Ground clearance | 18.1 inches
45 cm |
4WD Ground clearance | 11.8 inches
29 cm |
2WD Front tread | 53.2 to 72.8 inches
135 to 184 cm |
Rear tread | 55.1 to 74.8 inches
139 to 189 cm |
Deutz-Fahr D 5207 Weight | |
|---|---|
2WD Operating | 5952 lbs
2699 kg |
4WD Operating | 6592 lbs
2990 kg |
Max capacity | 8818 lbs
3999 kg |
Photos
Deutz-Fahr D 5207
Recommended Implements & Sizing Guide
Engineering recommendations for Deutz Fahr Deutz-Fahr D 5207 based on its 51 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 2 to 3 Bottom (14-16")2 - 3 铧 (35-40 cm) | Medium Duty | Standard utility farm tillage. |
Rotary Cutter / MowerMowing & Clearing | 6 ft (72 in)1.8 m | Medium Duty | Medium pasture clearing; rear slip-clutch recommended. |
Rotary TillerSeedbed Prep | 66 to 72 in165 - 180 cm | Medium Duty | Standard utility tiller; slip clutch protection required. |
Disc HarrowSecondary Tillage | 7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙 | Medium Duty | Field leveling and clod breaking behind plows. |
Hay BalerHay & Forage | Small Square Baler (14x18")小方捆打捆机 (36x46 cm) | Medium Duty | Classic 2-string baler for horse and small livestock hay. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Deutz Fahr Deutz-Fahr D 5207.
Estimated Continuous Field Runtime: 7 hrs
Approximately 7 hours of continuous field operation at ~75% rated power on a full tank (18.5 gal / 70 L).
Estimated 75% Load Fuel Burn~2.7 gal/hr (10 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Deutz Fahr Deutz-Fahr D 5207 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Deutz Fahr Deutz-Fahr D 5207.
Converted Equivalents:
Horsepower (HP)51 hp
Kilowatts (kW)38 kW
Metric Horsepower (PS / CV)51.7 PS
Direct Competitor Comparison
Compare Deutz-Fahr D 5207 against same-era industry alternatives in the same horsepower class.
Current Model
Deutz Fahr
Deutz-Fahr D 5207
Engine Power:Diesel (listed): 51 hp / 38.0 kW
★ Baseline Reference
International HarvesterMarket Competitor
International Harvester 385
Engine Power:46
Production Years:1985 - 1985
Related models
Deutz-Fahr Agrokid 45
- Power:
- 41.6
- Production years:
- 1997 - 2002
Deutz-Fahr Agrokid 220
- Power:
- 42.2
- Production years:
- 2007 - 2017
Deutz-Fahr 4046E Keyline
- Power:
- 44.3
- Production years:
- 2018 - 2026
Deutz-Fahr D 4807
- Power:
- 45
- Production years:
- 1980 - 1984
Deutz-Fahr DX 3.10
- Power:
- 46
- Production years:
- 1984 - 1990