Deutz-Fahr D 6807
The Deutz-Fahr D 6807 is a tractor produced by Deutz Fahr. It is equipped with a 230 ci 3.8 L engine. The listed engine power is Diesel (listed): 67 hp / 50.0 kW. Transmission: TW56.11. Operating weight: 6901 to 7717 pounds.
Engine Power
Diesel (listed): 67 hp / 50.0 kW
Fuel & Capacities
24.3 gal
92.0 L
Transmission
TW56.11
Operating Weight
6901 to 7717 pounds
Overview
 | 1980 - 1982
07 SeriesUtility tractor
07 Series
Utility tractor |
|---|
Production | |
|---|---|
Manufacturer | Deutz-Fahr |
Utility tractor | |
Deutz-Fahr D 6807 Engine | |
|---|---|
Deutz 3.8L 4-cyl diesel | |
Fuel tank | 24.3 gal
92.0 L |
Engine details ...  | |
Deutz-Fahr D 6807 Transmission | |
|---|---|
12-speed synchronized | |
Transmission details ...  |
Deutz-Fahr D 6807 Power | |
|---|---|
Engine | 67 hp
50.0 kW |
Drawbar (tested) | 58.59 hp
43.7 kW |
PTO (tested) | 68.18 hp
50.8 kW |
Performance test details ...  | |
Mechanical | |
|---|---|
Two- or four-wheel drive | |
Power steering | |
Four-post ROPS. Cab available with heat. |
Hydraulics | |
|---|---|
Type | open center |
Pump flow | 10.6 gpm
40.1 lpm |
Tractor hitch | |
|---|---|
Rear Type | II |
Control | position and draft control |
Rear lift | 5732 lbs
2600 kg |
7276 lbsOptOptional
3300 kg | |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 540/1000 |
Dimensions & Tires | |
|---|---|
Wheelbase | 95.67 inches
243 cm |
Weight | 6901 to 7717 pounds |
Front tire | 7.50-18 |
Rear tire | 13.6-38 |
Full dimensions and tires ...  | |
Engine
Engine Detail — 230 ci / 3.8 L Diesel
Manufacturer | Deutz F4L 912 |
Fuel Type | Diesel |
Configuration | 4-cylinder, air-cooled |
Displacement | 230 ci
3.8 L |
Bore/Stroke | 3.94x4.72 inches
100 x 120 mm |
Power | 67 hp
50.0 kW |
Rated RPM | 2100 |
Starter | electric |
Starter volts | 12 |
Transmission
Transmission — TW56.11
Transmission | TW56.11 |
Type | synchronized |
Gears | 12 forward and 4 reverse |
Dimensions
Deutz-Fahr D 6807 Tires | |
|---|---|
Ag front | 7.50-18 |
11.2-24 (4WD) | |
Ag rear | 13.6-38 |
Dimensions | |
|---|---|
Wheelbase | 95.67 inches
243 cm |
Length | 158.27 inches
402 cm |
Height | 106.30 inches
270 cm |
Deutz-Fahr D 6807 Weight | |
|---|---|
6901 lbs (2WD)
3130 kg | |
7717 lbs (4WD)
3500 kg | |
Ballasted | 11000 lbs*Two-wheel drive ROPS with rear fluid and iron weights plus front iron.
4989 kg |
Tests
Nebraska Tractor Test 1220 | |
|---|---|
Diesel 12-speed 2WD
September 3 - 13, 1976
Link: Nebraska Tractor Test 1220 file | |
PTO performance | |
Power at rated engine speed | 68.18 hp
50.8 kW |
Fuel use | 4.2 gal/hour
15.9 l/hour |
Power at rated PTO speed | 62.52 hp
46.6 kW |
Fuel use | 3.8 gal/hour
14.4 l/hour |
Drawbar performance | |
Max power | 58.59 hp
43.7 kW |
Fuel use | 4.0 gal/hour
15.1 l/hour |
Gear 3Z used for power test. | |
Max pull | 9095 lbs
4125 kg |
Gear 2L used for pull test. | |
Photos
Deutz-Fahr D 6807 tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for Deutz Fahr Deutz-Fahr D 6807 based on its 67 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 3 to 4 Bottom (16")3 - 4 铧 (40 cm) | Heavy Duty | Suitable for medium loam and stubble turnover. |
Rotary Cutter / MowerMowing & Clearing | 7 to 8 ft (84-96 in)2.1 - 2.4 m | Heavy Duty | Heavy-duty twin spindle cutter for overgrown acreage. |
Rotary TillerSeedbed Prep | 78 to 84 in200 - 215 cm | Heavy Duty | Heavy commercial tiller with multi-speed gearbox. |
Disc HarrowSecondary Tillage | 7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙 | Medium Duty | Field leveling and clod breaking behind plows. |
Hay BalerHay & Forage | 4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机 | Heavy Duty | Silage and dry hay; 540 RPM PTO with slip-clutch. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Deutz Fahr Deutz-Fahr D 6807.
Estimated Continuous Field Runtime: 7 hrs
Approximately 7 hours of continuous field operation at ~75% rated power on a full tank (24.3 gal / 92 L).
Estimated 75% Load Fuel Burn~3.5 gal/hr (13.2 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Deutz Fahr Deutz-Fahr D 6807 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Deutz Fahr Deutz-Fahr D 6807.
Converted Equivalents:
Horsepower (HP)67 hp
Kilowatts (kW)50 kW
Metric Horsepower (PS / CV)67.9 PS
Direct Competitor Comparison
Compare Deutz-Fahr D 6807 against same-era industry alternatives in the same horsepower class.
Current Model
Deutz Fahr
Deutz-Fahr D 6807
Engine Power:Diesel (listed): 67 hp / 50.0 kW
★ Baseline Reference
International HarvesterMarket Competitor
International Harvester 460
Engine Power:61
Production Years:1958 - 1963
Related models
Deutz-Fahr DX 3.30
- Power:
- 54
- Production years:
- 1984 - 1995
Deutz-Fahr 4055E Keyline
- Power:
- 54.2
- Production years:
- 2018 - 2026
Deutz-Fahr Intrac 2003
- Power:
- 59
- Production years:
- 1974 - 1979
Deutz-Fahr 4060E Keyline
- Power:
- 59.1
- Production years:
- 2018 - 2026
Deutz-Fahr 3.57
- Power:
- 60
- Production years:
- 1991 - 1995