TractorData Logo
TractorData

Deutz-Fahr DX 7.10

The Deutz-Fahr DX 7.10 is a tractor produced by Deutz Fahr. It is equipped with a 373.9 ci 6.1 L engine. The listed engine power is Diesel (listed): 160 hp / 119.3 kW. Transmission: Powermatic. Operating weight: 11905 to 12897 pounds.

Engine Power
Diesel (listed): 160 hp / 119.3 kW
Fuel & Capacities
66 gal 249.8 L
Transmission
Powermatic
Operating Weight
11905 to 12897 pounds

Overview

Deutz-Fahr DX 7.10 tractor photo
1984 - 1989 DX SeriesRow-Crop tractor DX Series Row-Crop tractor
Production
Manufacturer
Deutz-Fahr
Row-Crop tractor
Deutz-Fahr DX 7.10 Engine
Deutz 6.1L 6-cyl diesel
Fuel tank
66 gal 249.8 L
Engine details ...
Deutz-Fahr DX 7.10 Power
Engine
160 hp 119.3 kW
PTO (claimed)
145 hp 108.1 kW
Mechanical
Two- or four-wheel drive
Differential lock
mechanical rear
OPTITRAC front
Power steering
Hydraulic dry disc brakes
Mastercab standard with air-conditioning.
Hydraulics
Type
open center
Pressure
2538 psi 175.0 bar
Valves
1 to 3
Pump flow
27.3 gpm 103.3 lpm
Tractor hitch
Rear Type
III
Rear lift (at ends)
18739 lbs 8500 kg
Power Take-off (PTO)
Rear PTO
independent
Rear PTO Type
540/1000 (1.375)
Engine RPM
540@1920
1000@1920
Front PTO
independent
Front PTO Type
1000
Dimensions & Tires
2WD Wheelbase
103.5 inches 262 cm
4WD Wheelbase
111.3 inches 282 cm
Weight
11905 to 12897 pounds
Front tire
11.00x16
2WD Rear tire
20.8x38
Full dimensions and tires ...
Electrical
Ground
negative
Charging system
alternator
Battery volts
12
References
DX 7.10 references literature
DX4.70-DX6.30-DX6.50-DX7.10 published in 1984, by Deutz-Fahr

Engine

Engine Detail — 373.9 ci / 6.1 L Diesel

Manufacturer
Deutz F6L 913
Configuration
turbocharged diesel, 6-cylinder, air-cooled
Displacement
373.9 ci 6.1 L
Bore/Stroke
4.016x4.92 inches 102 x 125 mm
Power
160 hp 119.3 kW
Rated RPM
2400
Starter
electric
Starter volts
12
Oil capacity
17 qts 16.1 L

Transmission

Transmission options
24-speed two-speed power shift
32-speed

Transmission — Powermatic

Transmission
Powermatic
Type
two-speed power shift
Gears
24 forward and 8 reverse
Clutch
cerametallic disc
Oil capacity
79.25 qts 75.0 L

Transmission — 32 forward and 8 reverse

Gears
32 forward and 8 reverse

Dimensions

Deutz-Fahr DX 7.10 Tires
2WD Standard tires (ag)
Front: 11.00x16. Rear: 20.8x38
4WD Standard tires (ag)
Front: 16.9x28. Rear: 20.8x38
2WD Optional tires (ag)
Front: 11.00x16. Rear: 18.4x38
4WD Optional tires (ag)
Front: 14.9x28. Rear: 18.4x38
Dimensions
2WD Wheelbase
103.5 inches 262 cm
4WD Wheelbase
111.3 inches 282 cm
Length
187.8 inches 477 cm
Width
93 inches 236 cm
Height
109.8 inches 278 cm
2WD Weight
11905 lbs 5400 kg
4WD Weight
12897 lbs 5850 kg
Rear tread
64 to 88 inches 162 to 223 cm

Photos

Deutz-Fahr DX 7.10

Deutz-Fahr DX 7.10

Recommended Implements & Sizing Guide

Engineering recommendations for Deutz Fahr Deutz-Fahr DX 7.10 based on its 160 HP power envelope and ASAE agricultural standards.

Implement & OperationRecommended SizeWorkload RatingEngineering Notes
Moldboard PlowPrimary Tillage
5 to 7 Bottom (18")5 - 7 铧 (45 cm)Commercial / Field ScaleLarge acreage tillage; requires front ballast weights.
Rotary Cutter / MowerMowing & Clearing
15 to 20 ft Batwing4.6 - 6.1 m 宽幅折叠翼Commercial / Field ScaleLarge commercial field and roadside mowing operations.
Rotary TillerSeedbed Prep
90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机Commercial / Field ScaleDeep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage
15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙Commercial / Field ScaleWide commercial field leveling; requires hydraulic remotes.
Hay BalerHay & Forage
Large Square Baler (3x4 or 4x4)大方捆商用打捆机 (1.2x1.2 m)Commercial / Field ScaleHigh-capacity commercial forage harvesting (1000 RPM PTO).
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Deutz Fahr Deutz-Fahr DX 7.10.

Estimated Continuous Field Runtime: 7.9 hrs

Approximately 7.9 hours of continuous field operation at ~75% rated power on a full tank (66 gal / 249.8 L).

Estimated 75% Load Fuel Burn~8.3 gal/hr (31.5 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours

Deutz Fahr Deutz-Fahr DX 7.10 Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for Deutz Fahr Deutz-Fahr DX 7.10.

Converted Equivalents:

Horsepower (HP)160 hp
Kilowatts (kW)119.3 kW
Metric Horsepower (PS / CV)162.2 PS

Direct Competitor Comparison

Compare Deutz-Fahr DX 7.10 against same-era industry alternatives in the same horsepower class.

Current Model
Deutz Fahr

Deutz-Fahr DX 7.10

Engine Power:Diesel (listed): 160 hp / 119.3 kW
★ Baseline Reference
DeereMarket Competitor

Deere 4250

Engine Power:144
Production Years:1983 - 1988
View Full Specs→
International HarvesterMarket Competitor

International Harvester 1086

Engine Power:144.4
Production Years:1976 - 1981
View Full Specs→
Massey FergusonMarket Competitor

Massey Ferguson 3650

Engine Power:144.4
Production Years:1987 - 1990
View Full Specs→
CaseIHMarket Competitor

CaseIH 7110

Engine Power:144.4
Production Years:1987 - 1993
View Full Specs→

Related models