Deutz-Fahr Agrotron 6.30

The Deutz-Fahr Agrotron 6.30 is a tractor produced by Deutz Fahr. It is equipped with a 436 ci 7.1 L engine. The listed engine power is Diesel (listed): 132 hp / 98.4 kW. Transmission: 24 forward and 8 reverse. Operating weight: 11818 lbs 5360 kg.

Engine Power

Diesel (listed): 132 hp / 98.4 kW

Fuel & Capacities

68.7 gal 260.0 L

Transmission

24 forward and 8 reverse

Operating Weight

11818 lbs 5360 kg

Overview

	1995 - 1997 Agrotron-6 SeriesUtility tractor Agrotron-6 Series Utility tractor

Production
Manufacturer	Deutz-Fahr
Utility tractor

Deutz-Fahr 6.30 Engine
Deutz 7.1L 6-cyl diesel
Fuel tank	68.7 gal 260.0 L
Engine details ...

Deutz-Fahr 6.30 Transmission
24-speed
Transmission details ...

Deutz-Fahr 6.30 Power
Engine	132 hp 98.4 kW

Mechanical
Four-wheel drive

Hydraulics
Pump flow	21.9 gpm 82.9 lpm

Tractor hitch
Rear lift	20374 lbs 9241 kg

Power Take-off (PTO)
Rear PTO Type	540, 1000

Dimensions & Tires
Wheelbase	109.05 inches 276 cm
Weight	11818 lbs 5360 kg
Front tire	16.9R28
Rear tire	20.8R38
Full dimensions and tires ...

Engine

Engine Detail — 436 ci / 7.1 L Diesel

Manufacturer	Deutz
Configuration	turbocharged diesel, 6-cylinder
Displacement	436 ci 7.1 L
Bore/Stroke	4.252x5.12 inches 108 x 130 mm
Power	132 hp 98.4 kW
Rated RPM	2300

Transmission

Transmission — 24 forward and 8 reverse

Gears

24 forward and 8 reverse

Dimensions

Deutz-Fahr 6.30 Tires
Ag front	16.9R28
Ag rear	20.8R38

Dimensions
Wheelbase	109.05 inches 276 cm
Length	184.25 inches 467 cm
Height	116.54 inches 296 cm
Weight	11818 lbs 5360 kg

Recommended Implements & Sizing Guide

Engineering recommendations for Deutz Fahr Deutz-Fahr Agrotron 6.30 based on its 132 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙	Commercial / Field Scale	Wide commercial field leveling; requires hydraulic remotes.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Deutz Fahr Deutz-Fahr Agrotron 6.30.

Estimated Continuous Field Runtime: 10 hrs

Approximately 10 hours of continuous field operation at ~75% rated power on a full tank (68.7 gal / 260.1 L).

Estimated 75% Load Fuel Burn~6.9 gal/hr (26 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours

Deutz Fahr Deutz-Fahr Agrotron 6.30 Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for Deutz Fahr Deutz-Fahr Agrotron 6.30.

Enter value:

Unit:

Converted Equivalents:

Horsepower (HP)132 hp

Kilowatts (kW)98.4 kW

Metric Horsepower (PS / CV)133.8 PS

Direct Competitor Comparison

Compare Deutz-Fahr Agrotron 6.30 against same-era industry alternatives in the same horsepower class.

Current Model

Deutz Fahr