Deutz-Fahr Intrac 2002

The Deutz-Fahr Intrac 2002 is a tractor produced by Deutz Fahr. It is equipped with a 172.5 ci 2.8 L engine. The listed engine power is Diesel (listed): 50.3 hp / 37.5 kW. Transmission: 12 forward and 4 reverse. Operating weight: 5372 to 6724 pounds.

Engine Power

Diesel (listed): 50.3 hp / 37.5 kW

Fuel & Capacities

Diesel

Transmission

12 forward and 4 reverse

Operating Weight

5372 to 6724 pounds

Overview

	1972 - 1974 Intrac 2000 SeriesTool Carrier tractor Intrac 2000 Series Tool Carrier tractor

Production
Manufacturer	Deutz-Fahr
Tool Carrier tractor

Variants
2002A	4WD

Deutz-Fahr Intrac 2002 Engine
Deutz 2.8L 3-cyl diesel
Engine details ...

Deutz-Fahr Intrac 2002 Power
Engine	50.3 hp 37.5 kW

Mechanical
Two- or four-wheel drive
2WD Steering	manual
4WD Steering	power

Hydraulics
Pump flow	7.2 gpm 27.3 lpm

Tractor hitch
Rear Type	II/I
Rear lift	4930 lbs 2236 kg
Front Hitch	I
Front lift	2579 lbs 1169 kg

Power Take-off (PTO)
Rear PTO Type	540/1000 (1.375)
Engine RPM	2100
Front PTO Type	1000 (1.375)
Engine RPM	2100

Dimensions & Tires
2WD Wheelbase	84.7 inches 215 cm
4WD Wheelbase	86.6 inches 219 cm
Weight	5372 to 6724 pounds
Front tire	7.50-16
2WD Rear tire	12.4/11-32
Full dimensions and tires ...

References

Intrac System 2000 - Intrac 2002 published in 1972, by Deutz

Engine

Engine Detail — 172.5 ci / 2.8 L Diesel

Manufacturer	Deutz F3L912
Fuel Type	Diesel
Configuration	3-cylinder, air-cooled
Displacement	172.5 ci 2.8 L
Bore/Stroke	3.94x4.72 inches 100 x 120 mm
Power	50.3 hp 37.5 kW
Rated RPM	2300

Transmission

Transmission options
8-speed synchronized
12-speed creeper

Transmission — 8 forward and 4 reverse synchronized

Type	synchronized
Gears	8 forward and 4 reverse
Four gears in two ranges, plus reverse range.

Transmission
Type	creeper
Gears	12 forward and 4 reverse

Dimensions

Deutz-Fahr Intrac 2002 Tires
2WD Standard tires (ag)	Front: 7.50-16. Rear: 12.4/11-32
4WD Standard tires (ag)	Front: 7.50-18. Rear: 12.4/11-32

Dimensions
2WD Wheelbase	84.7 inches 215 cm
4WD Wheelbase	86.6 inches 219 cm
Length	167.3 inches 424 cm
Width	74.4 inches 188 cm
Height (cab)	98.4 inches 249 cm
2WD Weight	5372 lbs 2436 kg
4WD Weight	6724 lbs 3050 kg
2WD Ground clearance	17.9 inches 45 cm
4WD Ground clearance	10 inches 25 cm
2WD Front tread	60.6 to 72.4 inches 153 to 183 cm
Front tread	60.6 inches 153 cm
Rear tread	59.8 to 71.7 inches 151 to 182 cm

Photos

Deutz-Fahr Intrac 2002 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Deutz Fahr Deutz-Fahr Intrac 2002 based on its 50.3 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	2 to 3 Bottom (14-16")2 - 3 铧 (35-40 cm)	Medium Duty	Standard utility farm tillage.
Rotary Cutter / MowerMowing & Clearing	6 ft (72 in)1.8 m	Medium Duty	Medium pasture clearing; rear slip-clutch recommended.
Rotary TillerSeedbed Prep	66 to 72 in165 - 180 cm	Medium Duty	Standard utility tiller; slip clutch protection required.
Disc HarrowSecondary Tillage	7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙	Medium Duty	Field leveling and clod breaking behind plows.
Hay BalerHay & Forage	Small Square Baler (14x18")小方捆打捆机 (36x46 cm)	Medium Duty	Classic 2-string baler for horse and small livestock hay.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Deutz Fahr Deutz-Fahr Intrac 2002.

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours

Deutz Fahr Deutz-Fahr Intrac 2002 Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for Deutz Fahr Deutz-Fahr Intrac 2002.

Enter value:

Unit:

Converted Equivalents:

Horsepower (HP)50.3 hp

Kilowatts (kW)37.5 kW

Metric Horsepower (PS / CV)51 PS

Direct Competitor Comparison

Compare Deutz-Fahr Intrac 2002 against same-era industry alternatives in the same horsepower class.

Current Model

Deutz Fahr