Erkunt Servet 2x4

The Erkunt Servet 2x4 is a tractor produced by Erkunt. It is equipped with a 201.4 ci 3.3 L engine. The listed engine power is Diesel (listed): 73.8 hp / 55.0 kW. Transmission: 16 forward and 8 reverse. Operating weight: 7,077 lbs 3210 kg.

Engine Power

Diesel (listed): 73.8 hp / 55.0 kW

Fuel & Capacities

18.5 gal 70.0 L

Transmission

16 forward and 8 reverse

Operating Weight

7,077 lbs 3210 kg

Overview

Production
Manufacturer	Erkunt
Built in Ankara, Turkey
The Servet 2x4 is the same as the ArmaTrac 802

Erkunt Servet 2x4 Engine
Perkins 3.3L 3-cyl diesel
Fuel tank	18.5 gal 70.0 L
Engine details ...

Erkunt Servet 2x4 Transmission
16-speed
Transmission details ...

Erkunt Servet 2x4 Power
Engine	73.8 hp 55.0 kW

Mechanical
Multiple wet disc brakes

Hydraulics
Total flow	10.04 gpm 38.0 lpm
Steering press.	155.9 psi 10.7 bar

Tractor hitch
Rear lift	5,291 lbs 2399 kg

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540/750

Dimensions & Tires
Wheelbase	85.8 inches 217 cm
Full dimensions and tires ...

Engine

Engine Detail — 201.4 ci / 3.3 L Diesel

Manufacturer	Perkins 1103C-33T
Configuration	turbocharged diesel, 3-cylinder
Displacement	201.4 ci 3.3 L
Bore/Stroke	4.134x5.00 inches 105 x 127 mm
Power	73.8 hp 55.0 kW
Air cleaner	dry with internal prefilter
Compression	18.25:1
Rated RPM	2200
Torque	214.4 lb-ft 290.7 Nm
Torque RPM	1400
Oil capacity	7.4 qts 7.0 L

Transmission

Transmission — 16 forward and 8 reverse

Gears

16 forward and 8 reverse

Dimensions

Erkunt Servet 2x4 Tires

Dimensions
Wheelbase	85.8 inches 217 cm
Width	76.2 inches 193 cm
Height	105.1 inches 266 cm
Ballasted weight	7,077 lbs 3210 kg
Ground clearance	14.2 inches 36 cm

Recommended Implements & Sizing Guide

Engineering recommendations for Erkunt Servet 2x4 based on its 73.8 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	3 to 4 Bottom (16")3 - 4 铧 (40 cm)	Heavy Duty	Suitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing	7 to 8 ft (84-96 in)2.1 - 2.4 m	Heavy Duty	Heavy-duty twin spindle cutter for overgrown acreage.
Rotary TillerSeedbed Prep	78 to 84 in200 - 215 cm	Heavy Duty	Heavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage	7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙	Medium Duty	Field leveling and clod breaking behind plows.
Hay BalerHay & Forage	4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机	Heavy Duty	Silage and dry hay; 540 RPM PTO with slip-clutch.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Erkunt Servet 2x4.

Estimated Continuous Field Runtime: 4.8 hrs

Approximately 4.8 hours of continuous field operation at ~75% rated power on a full tank (18.5 gal / 70 L).

Estimated 75% Load Fuel Burn~3.8 gal/hr (14.5 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours