Erkunt Bereket 65

The Erkunt Bereket 65 is a tractor produced by Erkunt. It is equipped with a 201.4 ci 3.3 L engine. The listed engine power is Diesel (listed): 63 hp / 47.0 kW. Transmission: 16 forward and reverse. Operating weight: 6746 to 7716 pounds.

Engine Power

Diesel (listed): 63 hp / 47.0 kW

Fuel & Capacities

29.1 gal 110.1 L

Transmission

16 forward and reverse

Operating Weight

6746 to 7716 pounds

Overview

	2010 - Utility tractor
2010 -
Utility tractor

Production
Manufacturer	Erkunt
Utility tractor
Built in Ankara, Turkey

Erkunt Bereket 65 Engine
Perkins 3.3L 3-cyl diesel
Fuel tank	29.1 gal 110.1 L
Engine details ...

Erkunt Bereket 65 Transmission
16-speed power shuttle
Transmission details ...

Erkunt Bereket 65 Power
Engine	63 hp 47.0 kW

Mechanical
Two- or four-wheel drive
ROPS. Cab available with air-conditioning.

Hydraulics
Pressure	2756 psi 190.0 bar
Valves	4
Pump flow	12.8 gpm 48.4 lpm

Tractor hitch
Rear lift	7055 lbs 3200 kg

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	430/540/540E/1000

Dimensions & Tires
2WD Wheelbase	85.8 inches 217 cm
4WD Wheelbase	87 inches 220 cm
Weight	6746 to 7716 pounds
Front tire	7.50-16
2WD Rear tire	13.6-36
Full dimensions and tires ...

References

Luxury Series published by Erkunt

Engine

Engine Detail — 201.4 ci / 3.3 L Diesel

Manufacturer	Perkins 1103D-33TA
Configuration	turbocharged intercooled diesel, 3-cylinder, liquid-cooled
Displacement	201.4 ci 3.3 L
Bore/Stroke	4.13x5.00 inches 105 x 127 mm
Emissions	Stage IIIA
Power	63 hp 47.0 kW
Rated RPM	2200
Torque	206.5 lb-ft 280.0 Nm
Torque RPM	1400
Starter type	electric

Transmission

Transmission — 16 forward and reverse power shuttle

Type	power shuttle
Gears	16 forward and reverse

Dimensions

Erkunt Bereket 65 Tires
2WD Standard tires (ag)	Front: 7.50-16. Rear: 13.6-36
4WD Standard tires (ag)	Front: 280/85R24. Rear: 340/85R36

Dimensions
2WD Wheelbase	85.8 inches 217 cm
4WD Wheelbase	87 inches 220 cm
Length	161 inches 408 cm
Width	76.2 inches 193 cm
Height (ROPS)	106.3 inches 270 cm
Height (cab)	106.3 inches 270 cm
Rear tread	59.1 to 74.8 inches 150 to 189 cm

Erkunt Bereket 65 Weight
2WD ROPS	6746 lbs 3059 kg
4WD ROPS	7275 lbs 3299 kg
4WD Cab	7275 lbs 3299 kg
4WD Cab	7716 lbs 3499 kg

Photos

Erkunt Bereket 65 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Erkunt Bereket 65 based on its 63 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	3 to 4 Bottom (16")3 - 4 铧 (40 cm)	Heavy Duty	Suitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing	6 ft (72 in)1.8 m	Medium Duty	Medium pasture clearing; rear slip-clutch recommended.
Rotary TillerSeedbed Prep	66 to 72 in165 - 180 cm	Medium Duty	Standard utility tiller; slip clutch protection required.
Disc HarrowSecondary Tillage	7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙	Medium Duty	Field leveling and clod breaking behind plows.
Hay BalerHay & Forage	4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机	Heavy Duty	Silage and dry hay; 540 RPM PTO with slip-clutch.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Erkunt Bereket 65.

Estimated Continuous Field Runtime: 8.9 hrs

Approximately 8.9 hours of continuous field operation at ~75% rated power on a full tank (29.1 gal / 110.2 L).

Estimated 75% Load Fuel Burn~3.3 gal/hr (12.4 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours