Farm Pro 8010
The Farm Pro 8010 is a tractor produced by Farm Pro. It is equipped with a 225.84 ci 3.7 L engine. The listed engine power is Diesel (listed): 80 hp / 59.7 kW. Transmission: 8 forward and 2 reverse. Operating weight: 6790 to 7296 pounds.
Engine Power
Diesel (listed): 80 hp / 59.7 kW
Fuel & Capacities
14.9 gal
56.4 L
Transmission
8 forward and 2 reverse
Operating Weight
7,296 lbs
3309 kg
Overview
 | 2005 - 2012
Jinma built |
|---|
Production | |
|---|---|
Distributor | Farm Pro |
Manufacturer | Jinma |
Built in China | |
Farm Pro 8010 Engine | |
|---|---|
3.7L 4-cyl diesel | |
Engine details ...  |
Farm Pro 8010 Transmission | |
|---|---|
8-speed | |
Transmission details ...  |
Farm Pro 8010 Power | |
|---|---|
Engine | 80 hp
59.7 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Steering | power |
ROPS canopy | |
Capacity | |
|---|---|
Fuel | 14.9 gal
56.4 L |
Hydraulic system | 5.85 gal
22.1 L |
Hydraulics | |
|---|---|
Capacity | 5.85 gal
22.1 L |
Total flow | 9.30 gpm
35.2 lpm |
Tractor hitch | |
|---|---|
Rear Type | II |
Rear lift (at 24"/610mm) | 2,787 lbs
1264 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO Type | 540 |
Dimensions & Tires | |
|---|---|
Wheelbase | 88.0 inches
223 cm |
Weight | 6790 to 7296 pounds |
Front tire | 8.3-24 |
Rear tire | 14.9-30 |
Full dimensions and tires ...  | |
Engine
Engine Detail — 225.84 ci / 3.7 L Diesel
Fuel Type | Diesel |
Configuration | 4-cylinder, liquid-cooled |
Displacement | 225.84 ci
3.7 L |
Bore/Stroke | 3.93x5.00 inches
100 x 127 mm |
Power | 80 hp
59.7 kW |
Rated RPM | 2300 |
Oil capacity | 11.6 qts
11.0 L |
Coolant capacity | 16.8 qts
15.9 L |
Transmission
Transmission — 8 forward and 2 reverse
Gears | 8 forward and 2 reverse |
Oil capacity | 50.5 qts
47.8 L |
 | |
Dimensions
Farm Pro 8010 Tires | |
|---|---|
Ag front | 8.3-24 |
Ag rear | 14.9-30 |
Dimensions | |
|---|---|
Wheelbase | 88.0 inches
223 cm |
Length | 159.8 inches
405 cm |
Width | 75.9 inches
192 cm |
Height | 109.5 inches
278 cm |
Shipping weight | 6,790 lbs
3079 kg |
Operating weight | 7,296 lbs
3309 kg |
Ground clearance | 13.4 inches
34 cm |
Photos
Farm Pro 8010 tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for Farm Pro 8010 based on its 80 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 3 to 4 Bottom (16")3 - 4 铧 (40 cm) | Heavy Duty | Suitable for medium loam and stubble turnover. |
Rotary Cutter / MowerMowing & Clearing | 7 to 8 ft (84-96 in)2.1 - 2.4 m | Heavy Duty | Heavy-duty twin spindle cutter for overgrown acreage. |
Rotary TillerSeedbed Prep | 78 to 84 in200 - 215 cm | Heavy Duty | Heavy commercial tiller with multi-speed gearbox. |
Disc HarrowSecondary Tillage | 10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙 | Heavy Duty | Aggressive residue cutting in corn/cotton stubble. |
Hay BalerHay & Forage | 4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机 | Heavy Duty | Silage and dry hay; 540 RPM PTO with slip-clutch. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Farm Pro 8010.
Estimated Continuous Field Runtime: 3.6 hrs
Approximately 3.6 hours of continuous field operation at ~75% rated power on a full tank (14.9 gal / 56.4 L).
Estimated 75% Load Fuel Burn~4.2 gal/hr (15.7 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Farm Pro 8010 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Farm Pro 8010.
Converted Equivalents:
Horsepower (HP)80 hp
Kilowatts (kW)59.7 kW
Metric Horsepower (PS / CV)81.1 PS
Direct Competitor Comparison
Compare Farm Pro 8010 against same-era industry alternatives in the same horsepower class.
Current Model
Farm Pro
Farm Pro 8010
Engine Power:Diesel (listed): 80 hp / 59.7 kW
★ Baseline Reference
Related models
Farm Pro 7020
- Power:
- 70
- Production years:
- 2005 - 2012
Farm Pro 7040
- Power:
- 70
- Production years:
- 2005 - 2012
Farm Pro 7510
- Power:
- 75
- Production years:
- 2005 - 2012
Farm Pro 8220
- Power:
- 82
- Production years:
- 2005 - 2012
Farm Pro 2010
- Power:
- 20
- Production years:
- 2005 - 2012