Farmall B-450
The Farmall B-450 is a tractor produced by Farmall. It is equipped with a 264 ci 4.3 L engine. The listed engine power is Diesel (listed): 55 hp / 41.0 kW. Transmission: 5 forward and 1 reverse. Operating weight: 5930 lbs 2689 kg.
Overview
![]() | 1959 - 1970
Row-Crop tractor |
|---|
Production | |
|---|---|
Manufacturer | Farmall (a part of International Harvester) |
Row-Crop tractor | |
Built in Doncaster, England | |
Total built | 11,011 |
Variants | |
|---|---|
McCormick B-450 | standard |
Farmall B-450 | row-crop |
Farmall B-450 Engine | |
|---|---|
International Harvester 4.3L 4-cyl diesel | |
Engine details ... |
Farmall B-450 Transmission | |
|---|---|
5-speed gear | |
Transmission details ... |
Farmall B-450 Power | |
|---|---|
Engine | 55 hp
41.0 kW |
Mechanical | |
|---|---|
Two-wheel drive | |
Differential lock | mechanical rear |
Manual steering | |
Open operator station. | |
Capacity | |
|---|---|
Fuel | 20.9 gal
79.1 L |
Hydraulic system | 3.6 gal
13.6 L |
Hydraulics | |
|---|---|
Type | open center |
Capacity | 3.6 gal
13.6 L |
Pressure | 2000 psi
137.9 bar |
Tractor hitch | |
|---|---|
Rear Type | II |
Rear lift | 6240 lbs
2830 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO Type | 540 (1.375) |
Engine RPM | 555@1500 |
Dimensions & Tires | |
|---|---|
Wheelbase | 79.5 inches
201 cm |
Weight | 5930 lbs
2689 kg |
Front tire | 6.00x16 |
Rear tire | 13.00x30 |
Full dimensions and tires ... | |
Belt Pulley | |
|---|---|
Diameter | 11 inches
27 cm |
RPM | 929.6 |
Speed | 2677 ft/min
815.95 meters/min |
References | |
|---|---|
![]() | |
International 1917-1961 Vintage Tractor Special by Allen Condie* | |
The Roar of Dust and Diesel - A Story of International Harvester Doncaster by Mike Teanby | |
World Wide Farm Equipment Buyer's Guide published in 1968, by International Harvester* | |
B-450 Series Tractor published in 1962, by International Harvester | |
Farmall B-450 published in 1959, by International Harvester | |
*Publication contains known errors. |
Engine
Engine Detail — 264 ci / 4.3 L Diesel
Manufacturer | International Harvester BD-264 |
Fuel Type | Diesel |
Configuration | 4-cylinder, liquid-cooled |
Displacement | 264 ci
4.3 L |
Bore/Stroke | 4.00x5.25 inches
102 x 133 mm |
Power | 55 hp
41.0 kW |
Rated RPM | 1500 |
Torque | 200 lb-ft
271.2 Nm |
Torque RPM | 1100 |
Starter | electric |
Starter volts | 12 |
Oil capacity | 9.6 qts
9.1 L |
Coolant capacity | 26.4 qts
25.0 L |
Farmall B-450 Engine | |
|---|---|
![]() |
Transmission
Transmission — 5 forward and 1 reverse gear
Type | gear |
Gears | 5 forward and 1 reverse |
Clutch | 305mm dry disc |
Oil capacity | 52.8 qts
50.0 L |
With 13.00x30 rear tires. | |
![]() | |
Dimensions
Farmall B-450 Tires | |
|---|---|
Ag front | 6.00x16 |
Ag rear | 13.00x30 |
Ag rear | 14.00x30 |
12.00x38 | |
Dimensions | |
|---|---|
Wheelbase | 79.5 inches
201 cm |
Length | 139.5 inches (tricycle)
354 cm |
144.5 inches (wide-front)
367 cm | |
Height (steering wheel) | 77.75 inches
197 cm |
Operating weight | 5930 lbs
2689 kg |
Clearance (front axle) | 19.6 inches
49 cm |
Front tread | 8/11.5/13.75/16.75 inches
20/29/34/42 cm |
Front tread | 51 to 81 inches
129 to 205 cm |
Rear tread | 64 to 84 inches
162 to 213 cm |
Rear tread | 84.5 to 101.25 inches
214 to 257 cm |
Rear tread | 96.5 to 113.25 inches
245 to 287 cm |
Photos
Recommended Implements & Sizing Guide
Engineering recommendations for Farmall B-450 based on its 55 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 3 to 4 Bottom (16")3 - 4 铧 (40 cm) | Heavy Duty | Suitable for medium loam and stubble turnover. |
Rotary Cutter / MowerMowing & Clearing | 6 ft (72 in)1.8 m | Medium Duty | Medium pasture clearing; rear slip-clutch recommended. |
Rotary TillerSeedbed Prep | 66 to 72 in165 - 180 cm | Medium Duty | Standard utility tiller; slip clutch protection required. |
Disc HarrowSecondary Tillage | 7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙 | Medium Duty | Field leveling and clod breaking behind plows. |
Hay BalerHay & Forage | Small Square Baler (14x18")小方捆打捆机 (36x46 cm) | Medium Duty | Classic 2-string baler for horse and small livestock hay. |
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Farmall B-450.
Estimated Continuous Field Runtime: 7.3 hrs
Approximately 7.3 hours of continuous field operation at ~75% rated power on a full tank (20.9 gal / 79.1 L).
Engine Crankcase Oil
Transmission & Hydraulic System
Engine Cooling System
Farmall B-450 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Farmall B-450.
Converted Equivalents:
Direct Competitor Comparison
Compare Farmall B-450 against same-era industry alternatives in the same horsepower class.
Farmall B-450
Related models
Farmall AM-7
- Power:
- 45.6
- Production years:
- 1957 - 1960
Farmall 340
- Power:
- 47
- Production years:
- 1958 - 1963
Farmall Super BM
- Power:
- 47.2
- Production years:
- 1954 - 1958
Farmall A-514
- Power:
- 50.5
- Production years:
- 1962 - 1964
Farmall 504
- Power:
- 51.1
- Production years:
- 1961 - 1968






