Farmall F-265
The Farmall F-265 is a tractor produced by Farmall. It is equipped with a 136 ci 2.2 L engine. The listed engine power is Diesel (listed): 35 hp / 26.1 kW. Transmission: 6 forward and 1 reverse. Operating weight: 4134 lbs 1875 kg.
Engine Power
Diesel (listed): 35 hp / 26.1 kW
Fuel & Capacities
11.4 gal
43.1 L
Transmission
6 forward and 1 reverse
Operating Weight
4134 lbs
1875 kg
Overview
 | 1959 - 1961
Row-Crop tractor |
|---|
Production | |
|---|---|
Manufacturer | Farmall (a part of International Harvester) |
Row-Crop tractor | |
Built in Saint Dizier, France | |
Farmall F-265 Engine | |
|---|---|
International Harvester 2.2L 4-cyl diesel | |
Engine details ...  |
Farmall F-265 Transmission | |
|---|---|
6-speed gear | |
Transmission details ...  |
Farmall F-265 Power | |
|---|---|
Engine | 35 hp
26.1 kW |
Mechanical | |
|---|---|
Two-wheel drive | |
Open operator station. |
Capacity | |
|---|---|
Fuel | 11.4 gal
43.1 L |
Hydraulic system | 3.3 gal
12.5 L |
Hydraulics | |
|---|---|
Capacity | 3.3 gal
12.5 L |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 540 (1.375) |
Engine RPM | 540@2000 |
Dimensions & Tires | |
|---|---|
Weight | 4134 lbs
1875 kg |
Front tire | 4.50-16 |
Rear tire | 10-36 |
Full dimensions and tires ...  | |
References | |
|---|---|
 | |
Serie 265 published in 1959, by International Harvester | |
Tracteur 265 published in 1960, by International Harvester |
Engine
Engine Detail — 136 ci / 2.2 L Diesel
Manufacturer | International Harvester FD-136 |
Fuel Type | Diesel |
Configuration | 4-cylinder, liquid-cooled |
Displacement | 136 ci
2.2 L |
Bore/Stroke | 3.29x4.00 inches
84 x 102 mm |
Power | 35 hp
26.1 kW |
Rated RPM | 2000 |
Starter | electric |
Starter volts | 12 |
Oil capacity | 5.1 qts
4.8 L |
Coolant capacity | 13 qts
12.3 L |
Farmall F-265 Engine | |
|---|---|
 |
Transmission
Transmission — 6 forward and 1 reverse gear
Type | gear |
Gears | 6 forward and 1 reverse |
With 10-36 rear tires. | |
 | |
Dimensions
Farmall F-265 Tires | |
|---|---|
Ag front | 4.50-16 |
Ag rear | 10-36 |
Ag front | 5.00-15 |
6.00-16 | |
Ag rear | 11-36 |
Dimensions | |
|---|---|
Length | 129.9 inches
329 cm |
Width | 83.9 inches
213 cm |
Height | 69.3 inches
176 cm |
Operating weight | 4134 lbs
1875 kg |
Ground clearance | 17.3 inches
43 cm |
Front tread | 49.2 to 77.6 inches
124 to 197 cm |
Rear tread | 50 to 78 inches
127 to 198 cm |
Photos
Farmall F-265 tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for Farmall F-265 based on its 35 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 2 to 3 Bottom (14-16")2 - 3 铧 (35-40 cm) | Medium Duty | Standard utility farm tillage. |
Rotary Cutter / MowerMowing & Clearing | 5 ft (60 in)1.5 m | Medium Duty | Pasture maintenance and weeds up to 1.5" diameter. |
Rotary TillerSeedbed Prep | 54 to 60 in135 - 150 cm | Medium Duty | Thorough seedbed preparation in orchards and vegetable plots. |
Disc HarrowSecondary Tillage | 5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片) | Light Duty | Small acreage soil break-up and secondary aeration. |
Hay BalerHay & Forage | Small Square Baler (14x18")小方捆打捆机 (36x46 cm) | Medium Duty | Classic 2-string baler for horse and small livestock hay. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Farmall F-265.
Estimated Continuous Field Runtime: 6.3 hrs
Approximately 6.3 hours of continuous field operation at ~75% rated power on a full tank (11.4 gal / 43.2 L).
Estimated 75% Load Fuel Burn~1.8 gal/hr (6.9 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Farmall F-265 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Farmall F-265.
Converted Equivalents:
Horsepower (HP)35 hp
Kilowatts (kW)26.1 kW
Metric Horsepower (PS / CV)35.5 PS
Direct Competitor Comparison
Compare Farmall F-265 against same-era industry alternatives in the same horsepower class.
Current Model
Farmall
Farmall F-265
Engine Power:Diesel (listed): 35 hp / 26.1 kW
★ Baseline Reference
Related models
Farmall F-20
- Power:
- 29.6
- Production years:
- 1932 - 1939
Farmall F-237
- Power:
- 30
- Production years:
- 1961 - 1962
Farmall Super H
- Power:
- 32.2
- Production years:
- 1953 - 1954
Farmall F-30
- Power:
- 33.3
- Production years:
- 1931 - 1939
Farmall 240
- Power:
- 34.4
- Production years:
- 1958 - 1962