Farmall H
The Farmall H is a tractor produced by Farmall. It is equipped with a 152.1 ci 2.5 L engine. The rated power output is 23.3 hp 17.4 kW. Transmission: 5 forward and 1 reverse. Operating weight: 3875 lbs 1757 kg.
Engine Power
23.3 hp
17.4 kW
Fuel & Capacities
17.5 gal
66.2 L
Transmission
5 forward and 1 reverse
Operating Weight
3875 lbs
1757 kg
Farmall H Serial Number & Year Decoder
Find the exact manufacture year of your tractor by checking your chassis serial number below.
Where to Find the Serial NumberThe serial number plate is commonly located on the front frame, tractor transmission housing (right side), or instrument panel badge.
Overview
![]() | 1939 - 1953
Row-Crop tractor |
|---|---|
1939 - 1953 | |
Row-Crop tractor | |
Production | |
|---|---|
Manufacturer | Farmall (a part of International Harvester) |
Row-Crop tractor | |
Built in Rock Island, Illinois, USA | |
Total built | 391,227 |
Original price was $2,000 in 1953 | |
The Farmall H is the row-crop version of the McCormick-Deering W-4. | |
Variants | |
|---|---|
H | row-crop |
HV | high-crop |
W-4 | standard tread |
I-4 | industrial |
O-4 | orchard |
Farmall H Transmission | |
|---|---|
5-speed sliding gear | |
Transmission details ... |
Farmall H Power | |
|---|---|
Drawbar (claimed) | 19 hp
14.2 kW |
Belt (claimed) | 24 hp
17.9 kW |
Drawbar (tested) | 24.17 hp
18.0 kW |
Belt (tested) | 26.20 hp
19.5 kW |
Performance test details ... | |
Mechanical | |
|---|---|
Two-wheel drive | |
Manual steering | |
Mechanical contracting band brakes | |
Open operator station. |
Capacity | |
|---|---|
Fuel | 17.5 gal
66.2 L |
Aux. fuel | 0.875 gal
3.3 L |
Hydraulic system | 1 gal
3.8 L |
Hydraulics | |
|---|---|
Capacity | 1 gal
3.8 L |
Tractor hitch | |
|---|---|
Type | Lift-All *Pneumatic implement lift system. |
Power Take-off (PTO) | |
|---|---|
Rear PTO Type | 540 *The 1-3/8 shaft was adopted in 1942. Prior to that, a 1-1/8 inch shaft was used. |
Dimensions & Tires | |
|---|---|
Wheelbase | 88.325 inches
224 cm |
Weight | 3875 lbs
1757 kg |
Front tire | 5.50-16 |
Rear tire | 51x6 |
Full dimensions and tires ... | |
Links | |
|---|---|
Farmall-H.com: detailed information on the H |
Electrical | |
|---|---|
Ground | positive |
Charging system | generator |
Battery volts | 6 |
References | |
|---|---|
![]() | |
Farmall Letter Series Tractors by Lee Klancher | |
No. 30 Power Loader published by International Harvester | |
Farm Loaders published in 1962, by International Harvester | |
Operator's Manual Farmall H (5358) published in 1940 | |
General Line Catalog published in 1949, by International Harvester |
Engine
Engine options | |
|---|---|
International Harvester 2.5L 4-cyl gasoline | |
International Harvester 2.5L 4-cyl distillate | |
International Harvester 2.5L 4-cyl kerosene |
Engine Detail — 152.1 ci / 2.5 L Gasoline
Manufacturer | International Harvester C-152 |
Fuel Type | Gasoline |
Configuration | 4-cylinder, liquid-cooled |
Displacement | 152.1 ci
2.5 L |
Bore/Stroke | 3.375x4.25 inches
86 x 108 mm |
Compression | 5.9:1 |
Rated RPM | 1650 |
Firing order | 1-3-4-2 |
Starter | hand-crank |
electric OptOptional | |
Starter volts | 6 |
Oil capacity | 6 qts
5.7 L |
Coolant capacity | 16.5 qts
15.6 L |
Sparkplug gap | 0.025 inches
0.635 mm |
Point gap | 0.013 inches
0.330 mm |
Intake valve clearance | 0.017 inches*Hot
0.432 mm |
Exhaust valve clearance | 0.017 inches*Hot
0.432 mm |
Engine Detail — 152.1 ci / 2.5 L
Manufacturer | International Harvester |
Configuration | 4-cylinder, liquid-cooled vertical I-head |
distillate | |
Displacement | 152.1 ci
2.5 L |
Bore/Stroke | 3.375x4.25 inches
86 x 108 mm |
Compression | 4.75:1 |
Firing order | 1-3-4-2 |
Oil capacity | 6 qts
5.7 L |
Coolant capacity | 16.5 qts
15.6 L |
Engine Detail — 152.1 ci / 2.5 L Kerosene
Manufacturer | International Harvester |
Fuel Type | Kerosene |
Configuration | 4-cylinder, liquid-cooled |
Displacement | 152.1 ci
2.5 L |
Bore/Stroke | 3.375x4.25 inches
86 x 108 mm |
Compression | 4.5:1 |
Firing order | 1-3-4-2 |
Oil capacity | 6 qts
5.7 L |
Coolant capacity | 16.5 qts
15.6 L |
Transmission
Transmission — 5 forward and 1 reverse sliding gear
Type | sliding gear |
Gears | 5 forward and 1 reverse |
Clutch | dry disc |
Oil capacity | 24 qts
22.7 L |
![]() | |
Dimensions
Farmall H Tires | |
|---|---|
Ag front | 5.50-16 |
6-16 | |
Ag rear | 51x6 (steel) |
6.00-36 | |
8-38 | |
9-38 | |
10-38 | |
Ag front | 6x20 (HV) |
Dimensions | |
|---|---|
Wheelbase | 88.325 inches
224 cm |
Length | 125.25 inches
318 cm |
Width | 75.5 inches
191 cm |
100 inches (long-axle)
254 cm | |
Height (steering wheel) | 74 inches
187 cm |
Weight | 3875 lbs
1757 kg |
Front tread | 8.1 inches
20 cm |
Rear tread | 44 to 80 inches
111 to 203 cm |
Tests
Nebraska Tractor Test | |
|---|---|
Gasoline 5-speed 2WD
October 5 - 11, 1939
Link: Nebraska Tractor Test file | |
Belt power (max) | 26.20 hp
19.5 kW |
Belt fuel use (max) | 2.3 gal/hour
8.7 l/hour |
Drawbar performance | |
Max power | 24.17 hp
18.0 kW |
Gear 2 used for power test. | |
Max pull | 3,603 lbs
1634 kg |
Gear 1 used for pull test. | |
Nebraska Tractor Test 334 | |
|---|---|
Distillate 5-speed 2WD
November 6 - 11, 1939
Link: Nebraska Tractor Test 334 file | |
Belt power (max) | 23.3 hp
17.4 kW |
Drawbar performance | |
Max power | 21.4 hp
16.0 kW |
Gear 2 used for power test. | |
Max pull | 3,169 lbs
1437 kg |
Gear 1 used for pull test. | |
Photos
Related models
Farmall 140
- Power:
- 23.3
- Production years:
- 1958 - 1973
Farmall C
- Power:
- 23.5
- Production years:
- 1948 - 1951
Farmall 100
- Power:
- 22.4
- Production years:
- 1954 - 1956
Farmall Regular
- Power:
- 22.3
- Production years:
- 1924 - 1932
Farmall 130
- Power:
- 24.7
- Production years:
- 1956 - 1958










