TractorData Logo
TractorData

Farmall Regular

The Farmall Regular is a tractor produced by Farmall. It is equipped with a 220.9 ci 3.6 L engine. Transmission: 3 forward and 1 reverse. Operating weight: 4,000 lbs 1814 kg.

Fuel & Capacities
13 gal 49.2 L
Transmission
3 forward and 1 reverse
Operating Weight
4,000 lbs 1814 kg

Overview

Farmall Regular tractor photo
Row-Crop tractor
Row-Crop tractor
Note: the Farmall model Regular is the same as the International Harvester Farmall. The following data is from the Farmall listing.
Production
Manufacturer
Farmall (a part of International Harvester)
Row-Crop tractor
Factories
Chicago, Illinois, USA
Rock Island, Illinois, USA
Total built
134,650
Farmall Regular Engine
International Harvester 3.6L 4-cyl gasoline
Fuel tank
13 gal 49.2 L
Aux. fuel
0.86 gal 3.3 L
Engine details ...
Farmall Regular Transmission
3-speed
Transmission details ...
Farmall Regular Power
Plows
2
Drawbar (tested)
13.27 hp 9.9 kW
Belt (tested)
20.05 hp 15.0 kW
Performance test details ...
Mechanical
Two-wheel drive
Steering
manual with automatic engagement of turning brakes
Open operator's seat
Power Take-off (PTO)
Rear PTO
transmission
Rear PTO Type
535
Dimensions & Tires
Weight
4,000 lbs 1814 kg
Front tire
25x4
Rear tire
40x6
Full dimensions and tires ...
Belt Pulley
Diameter
14 inches 35 cm
Width
6.5 inches 16 cm
RPM
693
References
Regular references literature
Will A Tractor Pay On Your Farm? published in 1930, by International Harvester

Engine

Note: the Farmall model Regular is the same as the International Harvester Farmall. The following data is from the Farmall listing.

Engine Detail — 220.9 ci / 3.6 L Gasoline

Manufacturer
International Harvester
Fuel Type
Gasoline
Configuration
4-cylinder, liquid-cooled vertical
Displacement
220.9 ci 3.6 L
Bore/Stroke
3.75x5.00 inches 95 x 127 mm
Air cleaner
oil bath and fiber
Rated RPM
1200
Starter type
hand crank
Coolant capacity
36 qts 34.1 L

Transmission

Note: the Farmall model Regular is the same as the International Harvester Farmall. The following data is from the Farmall listing.

Transmission — 3 forward and 1 reverse

Gears
3 forward and 1 reverse
Regular speeds

Dimensions

Note: the Farmall model Regular is the same as the International Harvester Farmall. The following data is from the Farmall listing.
Farmall Regular Tires
Ag front
25x4 steel
Ag rear
40x6 steel
Lawn/turf front
25x8 steel (Fairway)
Lawn/turf rear
40x16 steel (Fairway)
Dimensions
Length
136 inches 345 cm
Width
86 inches 218 cm
Height
67 inches 170 cm
Weight
4,000 lbs 1814 kg

Tests

Note: the Farmall model Regular is the same as the International Harvester Farmall. The following data is from the Farmall listing.
Nebraska Tractor Test 117
Gasoline 3-speed 2WD September 14 - 19, 1925 Link: Nebraska Tractor Test 117 file
Belt power (max)
20.05 hp 15.0 kW
Belt fuel use (max)
2.1 gal/hour 7.9 l/hour
Drawbar performance
Max power
13.27 hp 9.9 kW
Gear 2 used for power test.
Max pull
2,727 lbs 1236 kg
Gear 1 used for pull test.

Photos

Farmall Regular

Farmall Regular

Clayton and the Farmall.

Clayton and the Farmall.

Farmall with oil filter and duckbill steering gear.

Farmall with oil filter and duckbill steering gear.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Farmall Regular.

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours

Farmall Regular Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for Farmall Regular.

Converted Equivalents:

Horsepower (HP)0 hp
Kilowatts (kW)0 kW
Metric Horsepower (PS / CV)0 PS

Related models